I can't wait for this built. I'm interested to see how you repair it Alex

@gertraba4484

4 жыл бұрын

alot of that stuff was cisstom built and alot of $$$$$$$$$$$$$$$$$$$$$$$ to repro

This loader needs a raise!! Never seen such finesse and caution loading a car

@jumpinjojo

4 жыл бұрын

NickZtech The operator, too.

@jdias51

4 жыл бұрын

That's cuz he was on camera lol

@rolandroy6885

4 жыл бұрын

First time I ever seen one actually take there time and being cautious moving it and loading it!!

@joelpertzsch5809

4 жыл бұрын

Would have liked to see them duct tape some foam, rubber, or towels to the forks to minimize scratching, but yeah he did a nice job with it.

@billreid11

4 жыл бұрын

Loader probably saw the vid on the pan that Alex had to replace on the Viper...

You having the Lyft driver deliver the air suspension controller was golden!

Glad to see your fixing this thing! I was so bummed to see it crash. I’ll be following along. 👍🏻

@DontAskWhyItsJustCuz

4 жыл бұрын

#Facts... I just watched the rerun of that episode again just the other day...

When picking vehicles up from the side with a forklift, you can use wood blocks like 2x4 or 4x4 to keep from damaging anything from underneath like the exhaust or driveshaft. Takes about 4 pieces of wood depending. I know because I do this regularly due to my job in import/export loading and unloading vehicles from racks. Picking it up from the front like that, you can use 2" ratchet straps to hold onto the bumper or frame or some other point to the forks and that would have allowed you to pick up the whole truck, without it tilting back like that.

@deeznutzz8375

2 жыл бұрын

Nice 14 chapter story brah.

Nice choice for a project! I’m so pleased to see this truck rebuilt…especially after seeing it on Fast and Loud. I look forward to all the upcoming videos. Good luck on the rebuild!

Glad I ran across this in my feed. I have a soft spot for a square body and also interested to see the quality of the finish work and little things GMG did to it. Good luck with the rebuild.

YEAAAAAAAHHHHHHHHHHHHHHHHHHHH! So glad to see this being saved! You should get Casey to come out and paint it ;)

@badass6.0powerstroke10

4 жыл бұрын

It's K.C. Not Casey. My cousin is named Casey, she's a Girl.

@paulwisdom5383

4 жыл бұрын

@@badass6.0powerstroke10 It's been a loooooong time since I last watched some Fast 'n' Loud - My mistake! :)

Again with the awesome content glad I was able to help you jump start the c10 , your boy Chris from Dallas.

@RoyaltyRebuilds

4 жыл бұрын

Yes sir thank you again for all the help Chris!!

@arturo762

4 жыл бұрын

Mvp

@ValorGee

4 жыл бұрын

👍👍

@juangomez4295

4 жыл бұрын

Perrrooooo

@gertraba4484

4 жыл бұрын

@@RoyaltyRebuilds I think those wheels and the steering wheel isone off with the items made by BOYD CODDINGTON, might want to have the girl on GSG to chek on receipts and see who made it .................

All your video are great but this will be my favorite,can't wait to see the result of this one...thanks for sharing bro!!

I need this truck upon completion!!!! I live on the Mississippi coast and we have a massive classic car event called cruising the coast and this would be an awesome ride for that every year!

I hope you guys do this c10 rite. This was my favorite build ive ever watched. Bow tie till i die!! Gmg did such a good job on that truck. Ill be watching good luck man.

LMC truck parts... You need to get them on board! Can't wait for the tear down on this one! Get ready Nick, you got some work to do!

This is amazing Alex. Your channel is about to blow up and you well deserve it. Been watching since day one. Keep up the good work !

Good job picking this up Alex. This truck has a celebrity status and is well known. I am excited to see this build. It may be cursed but that just adds to the legend of the truck. Very smart move to get this one.

This is my favorite gas monkey build and luckily this popped up and now I can see it get rebuilt. I'm in ga also maybe I can see it in person one day. Good luck

That truck is famous you better keep that thing!! Seriously looking forward to this build!

@anastyb

4 жыл бұрын

You mean infamous

@MariaLeon-mw8nw

4 жыл бұрын

anastyb I think he meant because that was a famous Mexican guy

@russallen7214

2 жыл бұрын

Anyone know how crashed it

I love this build! It isnt an exotic or modern car. Bringing back an icon! So 🔥🔥🔥🔥💪🏻

Wow! Now thats what you call a rebuild. Cant wait to see how this turns out. Setting the trend for others to follow here in the UK 👍🏾

Yup. All in on this one. We're all about c10s and classic trucks on our channel. A friend just told me about your channel the other day and this seems like the perfect time to start tuning in.

Cool build!!! Better than an exotic any day thanks for posting Alex

Bro u just got the attention of every truck guy who was ever interested in this truck. Congrats on the find bro! Good luck!

Great score! Will be interesting watching you tear it down and get it road worthy again!

Awesome man! I'm glad you got to get the GMG truck and are gonna work on the rebuild with the crew! Fingers crossed it'll all work out!

Richard just called you out and linked this vid on his Facebook page. I’m here and I’m sure many others are on the way. Your going to blow up man !!

@xxhyjynxx5939

4 жыл бұрын

randsterama Feel better now?

This is going to be an AWESOME rebuild...really looking forward to seeing you work your magic on this insane truck!!

I guarantee that the frame is bent. Good news is those frames are all cold steel which means it can be massaged back into place without compromising it's strength. Pull slow, add heat to help it move and measure over and over. I would love to be playing with this rig!! I remember when Richard went to sell it, the battery went dead and they were having issues starting it to get it across the block.

Once you get in Square Bodies... You can't get out, So Damn Addictive! I have 3 in my yard right now...

This is going to be the best build on youtube byfar. If you are going to keep any build this should be the one.

@gertraba4484

4 жыл бұрын

how much $$$$$$ U gonna sink into this wreck??????????????

@blackbearddave

4 жыл бұрын

@@gertraba4484 doesnt matter bc the view this build will bring in will cover everything and then some

Awesome I cant wait to see this build. Good work Alex

Thank you for fixing that truck. I'm in the same perdickament. My 95 got hit. I have been putting back together for years

Did I miss something, like how much he paid? Just curious

Finally something cool and unique. So tired of the Lambos, R8’s, Vette’s , Hellcats. This will be interesting.

@docdahk5993

4 жыл бұрын

AbsoFUKNLootly

@SethBergile

4 жыл бұрын

Yeah plus it's completely hammered!! Not going to be easy.

that's going to be a hell of a job mate, hope it turns out well. cant wait to see it finished. keep up the good work!

Front clip, complete cab, new frame. Good luck!

@anastyb

4 жыл бұрын

dodgeguyz sarcasm much appreciated 😆😊😁

Hey bud, Your video is interrupting ALL THE ADS!

@DixieNormas

4 жыл бұрын

AdBlocker+ baby!!!

@Aboutthatimage

4 жыл бұрын

Way too many freaking ads

@Toxic2T

4 жыл бұрын

Ublock Origin

@robertdavis9366

4 жыл бұрын

@@DixieNormas xz6g Fgi0

@Hero-3

4 жыл бұрын

I hope you’re born after 93. Mid 90’s and on are freaking impatient.

Very cool build. I have an old ford pickup that sustained similar damage so Im extremely curious to see how he fixes her up.

Great build...that’s a true old skull ...much love from Kenya 🇰🇪

Awesome buy Alex. Can’t wait to see it getting rebuild.

I’m glad to see that you’re rebuilding this beautiful truck. 🧡

HELL YEAH! Best new build on you tube!!!!! 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@joeysweet9045

4 жыл бұрын

Dam right this might make him hit 1mil if word get's out!

Finally something different everybody just doing exotics and what not we need more classic rebuilds!

That thing is made of bondo!

Hell yeah. The 'El Jefe' burger. That is what I ordered along with 3 Miller Lite pints/yards in Jan 2016 when I drove from Long Beach to NJ. Recommended. Crazy music nights there.

Finally a classic pick up c10 thank you Alex 👌

Goon-what? You are going to be leading the rebuild channels with this new build!

Off to the frame rack. I'd be shocked if all that is just in the sheet metal!! Too many signs.

Can’t wait to watch this build .... a lot of work there but I believe you can get it done 👍🏻

Amazing Alex love this truck can't wait to watch you fix it

And this is the reason why Alex leads the pack of KZread rebuilders!

@blackkmagicc1960

4 жыл бұрын

He does good vids. But u cant 4get #Goonzquad

Had a lot of fun times in this truck.. Can't wait to see it rebuilt. You just got another subscriber!

Awsome.,. I can't wait to see this fine ride built... Again. I Bought a 79 c10 last night i will be rebuilding... This is the 4th square i have in my driveway i am building on my channel

Fix it, take it back down to Texas and show it to Richard.

@bleachmandagreatest4822

4 жыл бұрын

Charles Cummings the frame is bent it’s done unless he get another 76 and bring everything over

@darrelldarrell1447

4 жыл бұрын

Frame was bent before this accident. Insurance scam just like his supposedly stolen hell cat. Insurance fraud. This dude is an idiot buying this.

@jordanlittle5391

4 жыл бұрын

Frames can be fixed lol even if you cant put new rails you can weld in a half frame

What did you pay for the C-10??? The GOOD parts: 1. Engine/transmission/ rear end diff. 2. Cab/bed Trash parts: 1. Frame 2. Front clip 3. Two tires

@sampence1928

4 жыл бұрын

Lung Dong looks like he bought it from an auction. He prob paid so much he doesnt want to say.

@jasonups5386

4 жыл бұрын

About a $100

@nellyfarnsworth7381

4 жыл бұрын

@@jasonups5386 Hey my LONG lost brother DONG??🤔

@Serps-ii9zc

4 жыл бұрын

I don't know if I would put the cab under the good parts. It may be damaged too.

@nellyfarnsworth7381

4 жыл бұрын

@@sampence1928 I would like to have the engine/trans/rear end/suspension/bed/cab. Front clip/front suspension/frame, look to be damaged. Junk parts.

Haha I thought you were going to put truck in neutral an pull the truck with fork lift to your area ..

@randywhitford6358

4 жыл бұрын

I mean that would have made sense and worked

Hope you had fun in Dallas! I love my city. *ABOUT THE OFFROAD MUSTANG* Richard took it to the last cars and coffee at Classic BMW (it had been hosted there for years) Richard brought some crazy cars there. There were Pagani's and everything

According to the show everyone that has sold this truck has lost money, hopefully you can change that trend.

@jdias51

4 жыл бұрын

Alot of people that like aired out trucks like building there own and the whole airbag trend is kinda over now

@thedarklordsknigh

4 жыл бұрын

Yeah because that was actually sold before the accident

@fr_clan.official8938

4 жыл бұрын

WELL GAS MONKEY MADE MONEY OFF OF THE INSURANCE CLAIM . WHAT IS STRANGE I SEE THE TRUCK FIXED IN THE BACKGROUND ON NEW EPISODES !

@ManMountainMetals

4 жыл бұрын

@@fr_clan.official8938 According to the show, the new owner had brought the truck to GMG to get some minor cosmetic damage fixed. So when they wrecked it their insurance had to pay for it. I'm just wondering why they needed to test drive it on a freeway in the first place. Since the original damage had nothing to do with driveline or suspension you wouldn't think a test drive would have been necessary. As far as this truck being in the background shots, I'll take your word for it. I hadn't noticed.

@gsvallis

4 жыл бұрын

Man Mountain Link actually I’m pretty sure it had a bad rear diff if I recall? The new season has the whole incident in an episode. I just can’t remember why it was out for a drive but rear diff is ringing a bell

I wish I had known about this when you started this build,i have a crap ton of c10,c20,c30 parts!

@streetrat6455

4 жыл бұрын

where?! i daily drive a 78....

@johnstamos1069

4 жыл бұрын

check yo dms its important o.o

@ronaldserocke9471

4 жыл бұрын

Have a 76 C30 crew cab, SRW in near mint shape. Selling it now, no time to enjoy it now. sungodron@gmail.com

My first car in the early eighties was a 66 Chevelle. I was 15-16 bought it off some college chick for $100.00.A drunk driver took the driver side front end out. Froze my ass off in garage disassembling it (I had big plans, but no money) I then asked my stepfather who is probably the smartest person I know if the crushed in frame horn could be repaired he looked at me in disbelief and shook his head "no"., Crushed I called the junk yard the next day to come pick it up and tapped (no not in that way) my Oma for money to buy a much better 67. Seeing this truck reminded me of that time. Good luck with the project as you probably have alot more knowledge and resources then I did then!

dude thats awesome you got your hands on this truck, if i personally recall it was a semi the cut one of the monkeys off when they were test driving the truck after fixing damage from the current owner.

Do not often comment but will be watching the build! Nice you were able to buy it.

Truck is done take all the good components and put them on a solid c10

@phantom629

4 жыл бұрын

frame, front clip, cab, are scrap find another 76 and transfer the parts

@phantom629

4 жыл бұрын

@Edward Martinez ??? The crack in the plaster on the back of the cab is not going to be an easy fix that double wall structure in that area, you might be able to tweak the frame but the amount of hours it would take to fix those 2 items you could get a donor and have perfectly straight in far less time besides 73-80 iirc chevy/ gmc trucks are still around. And fairly easy to come by.

@kennydemartini2169

4 жыл бұрын

Agreed. That truck is done. It's a '76 square body, nothing special, and still plentiful. These people think they're going to cash in on the Gas Monkey build. They did nothing but hang parts on it. Anybody can do that. You can buy trucks built like that for under 20 grand in my area.

@anastyb

4 жыл бұрын

Mike Cates 73-81 will do

@anastyb

4 жыл бұрын

Kenny DeMartini you know what they say the difference between men and boys is the price of their toys. An insurance company wouldn’t care about a Gas Flunky vehicle. They see what we see A 1976 C10 Chevy KBB THAT! 😂

Your work ethic is second to none Alex, 1000 mile drive each way!! WTF!!. I can't wait to see how this turns out!

Oh man the truck is a beauty! I cant wait to see what you do with it! 👌👌👌

Good choice of project, Alex,the C10. Looking forward to the dismantaling and build videos. 😁🦘🇭🇲👌👍

Are you kiddin? Its bent in half. Get another frame.

Dude, my friend can fix it. He's a television repairman. Lol. Cant wait to see more of this, please. Personally; that frame is screwed.

Frame rails are now 'C' shaped and arched towards the passenger/right side. Open cab/bed gap on driver side and absolutely crushed together on the passenger side. Plus it was smacked a little more from the left versus head on. The right front wheel is offset outward relative to the rear wheel - and those are fat meats. Buuuttt, since you are nearly doing everything yourself, it will just take more time and careful planning than money to make it whole again. Good luck. I subscribed and look foward to viewing your older videos.

why not pad the forks?? $4 floaties from Walmart and you are money!!

@gertraba4484

4 жыл бұрын

i got mine 4 for a buck marked down last Friday from local Wal Mart

@philortega6516

4 жыл бұрын

...because those wreck resellers are looking to unload there inventory,not worry about scratching paint on ANY VEHICLE. They are not in the custom hot rod business

How did they put truck there in first place? I assure you they already scratched it up underneath

@VA-ng2ve

4 жыл бұрын

Probably was aired up when they dropped it and leaked over time. It's not hard to move vehicles without damaging them if you take your time doing it.

@RoyaltyRebuilds

4 жыл бұрын

Rollback

@wileecoyote5749

4 жыл бұрын

@@RoyaltyRebuildswell, I guess just have to wait n see. Hopefully it works out in your favor.

@holieocorneiousgerhart6174

4 жыл бұрын

Was thinking the same thing but if they dropped it there with the rollback you should be good to go.

@nationalcitysycho

4 жыл бұрын

I know didn't give a shit how they grab that truck before he got there that trucks probably been sitting there for weeks months they treat those cars like shit but as soon as they saw him with the camera they treated it like a baby

Glad my notifications where on, looking forward to watching this one.

Something incredibly meta about the idea of taking a truck which was built (and wrecked) on a reality show and rebuilding it on a KZread channel.

Good luck with this one. It's pretty rough!

Buy a new C10 Transfer everything over to a fresh shell

@gracilism

4 жыл бұрын

Id pull the old frame, cut off behind the damage and graft in a new front section. Looks like the rear of the frame has extensive mods you may not want to redo. I be the front does too, but have to remake it anyways.

@emerybryant

4 жыл бұрын

lol i do kind of agree. may need to build a chassis for it. but starting over with a new cab for sure would save a lot of time. as well as starting with fresh front fenders.

@beamngcrashcompilationsd6690

4 жыл бұрын

That's not how it works, bro.

@emerybryant

4 жыл бұрын

personally i dont mind the looks. ☺ then again ive owned 2 of them lol

@scottlyons9826

4 жыл бұрын

@nobody they were like that from that year till 1985

Cany wait for this rebuild. Knock it out of the park. One of my favorite trucks

Thank you so much for putting her back to life

Alex is one of those guys that sounds like he is reading when he is just talking.

"I don't know if the frame is damaged" 😂🤣 That's some funny shit! Let'r rip tater chip If it was me, I'd be swapping that frame out and buying a new front clip. Not a huge deal, depending on how much was invested off the hop.

I’m new to your channel and I think it’s great that you are fixing the truck. Good luck and God bless you.

Great video I can't wait to see you get this truck back on the road keep up the great work

How fkn cool is that. Way to go. 👊

Keep this truck.... Richie might buy it back from you... be a shrewd negotiator

@bradywilliams2666

4 жыл бұрын

LOL. He made is money off it already. If it meant anything to him. He would have kept it and rebuilt it.

@W9_906

4 жыл бұрын

Brady Williams lol... but it’s Richard you never know ....

Awesome! Just earned a new SUB! Glad someone is saving this truck

Any person whi watches GMG knew where the battery is instantly.... If you remember how Denis and Richard jump started it at the auction... Nice rebuild much love from Kenya 🇰🇪

Pay no attention to the neigh sayers. You go boy.

@Ty_N_KC

4 жыл бұрын

Absolutely!! If we listened to everyone who bitched about something nothing would ever get done. Cheers to this kid and his build

Haven yeah bro! Nice flex for rebuild, supercar is flooding on youtube...👍

You couldn't put the truck in neutral to move it with front end up? Did you check the glove box for the radio?

@1ofakindgt

4 жыл бұрын

@Dave Micolichek so strap it to the fork lift. 20 yrs in towing it could have easily been done.

@1ofakindgt

4 жыл бұрын

@Dave Micolichek he was moving it 10 feet not 10 miles could have easily been done. But to each their own he got it done on the dollies.

@jameshoberg1609

4 жыл бұрын

@@1ofakindgt he just didn't want to scratch it.

@1ofakindgt

4 жыл бұрын

@@jameshoberg1609 it's not that tough strap it to the fork lift and move it 10 ft but to each their own.

@anastyb

4 жыл бұрын

Many of us would just use a 2 ton jack under the front cross member and rolled the truck!

Looking forward to seeing this build come together

Yeees. That what we need. 😍 The classic car project

@troyeiffert338

4 жыл бұрын

Ugh. Hard to watch.

@mohammedal-hennai9658

4 жыл бұрын

@@troyeiffert338 😅 why?

@sumalbabaewau2689

4 жыл бұрын

It’s just a 76 clam down

@mohammedal-hennai9658

4 жыл бұрын

@@sumalbabaewau2689 ko 🧔

pull the drivetrain the wheels interior and good suspension parts and find a new truck. that thing is junk

@gertraba4484

4 жыл бұрын

custom frame, the bed and the cab is racked, motor is good andhope tranny same

@flyinbrianz22

4 жыл бұрын

I gotta agree. Thats a total custom truck. You'll never be able to replicate it.

@timmartin4798

4 жыл бұрын

Frame machine and a torch will be like new.

@gertraba4484

4 жыл бұрын

@GIRTH BROOKS cost alot of $$$$$$$$$$$$$$$$ for parts and I think the BEARDED WONDER MADE Aalot of them custom fabbed

@gosportjamie

4 жыл бұрын

The frame probably isn't as bad as the bodywork makes it look. If the frame was fabricated well when it was built then it should be possible to straighten it, IF the original frame details from when it was built are available. Most of the rest of it is going to be pretty simple, though replicating the original fabrication work that went into building it could be tricky. It shouldn't be too hard a project as long as the frame isn't totally wrecked...

Omg! When you think the R8 was exciting! Keeping my fingers crossed for this projekt!

I’m signing up to this channel because of this car! Awesome build😎

Oh hell yes! Its about time someone did an old truck.

100% sure forklift driver scratched the shit out of the lower part of the truck..I c major tear down🙄

Man, thanks for making this video. I office out of the yard you picked it up at in Dallas. I was really curious about who got it.. I really want to follow the updates on this truck.

If your on a "budget" and not gonna spend money like a rapper, than this truck is easily fixable. Two options to start. Put it on a Caroliner /blackhawk bench and get a chain around the left corner of the bumper. Pull it forward and to the left. It will clear the doors a little and square the front within a few inches. It takes tension of all bodypanels. Makes tearing it apart easier. After really tearing it apart you have acces to all bodyparts and really pull it straight. Bed and cab are easily fixable when bed removed. Most important part is getting it pulled straight and level, take your time and measure, measure. After that its a little repairing some dents and mounting parts. Second version you can take it apart, but then you have more trouble measuring and squaring everything up (if less experience). But it all depands on how it all looks constructionwise underneath. I do this for a living, and not one damaged car is the same as the other, even if the damage apears to be the same. To bad i don't live in the usa, or else this would be an awesome thing to help with. A coffee, meal and beer would be enough😄 Good luck and keep us updated...

Gas Monkey Garage : Restaurant is right in the same lot that Cowboys Red River is. Best dancehall in DFW area!

Oh shit I smell 500k soon from this alone. This is a hella smart move for the channel bro good job!

@prohen3049

4 жыл бұрын

Yeah, $500k once it's done, that's what Richard would want for it

That c10 is a great build all the best alex the battery is under the cab on the frame rail passenger side cant wait to see what you do to it 👍

The truck looks nice I can’t wait to see you rebuild it