Congratulations Tucker on graduating High School.

HI all, Just wanted to say thank you, once again, for sharing your work and time with all of us. As a retired old man, I am so grateful to you and your family. You give me joy. God bless youz.

@C_CEQUIPMENT

22 күн бұрын

Our pleasure!-Kevin

I especially enjoy the lighthearted atmosphere when have your family at the shop . I am very envious of the time you are able to spend with your family.

It’s awesome seeing these young men working with their hands and not playing video games or dying their hair blue! Congratulations you did good raising them

@spewp

23 күн бұрын

Oddly specific things to be upset about. What do you care what other people do with their own time? Would you criticize someone who becomes a professional athlete? Video games are a profession too. Imagine judging someone based on hair colour in 2024, lmao. Absolute loser.

@danietkissenle

20 күн бұрын

As mush as I would have liked to do this stuff when I was younger and just out of high school, no one I asked would have taken me on as an apprentice to, so I ended up working wally mart and playing videogames

It's awesome to see the whole family involved in the business. The more you teach them, the more likely they will make a good life for themselves and their families when the time comes.

Hunter needs to invite Marty T from New Zealand up to fix the snow machine. Marty doesn't fail...ever.

@williammccartney4833

24 күн бұрын

Marty the man the myth the legend!

@kenanderson3859

23 күн бұрын

Marty T is awesome

@andreweisan9613

23 күн бұрын

Pretty sure Marty T was an actual rocket scientist before youtube

@mikehunt3222

23 күн бұрын

That would be an expensive fix for someone when I’d bet the farm the only reason it won’t start is a bad crank seal.

@gordonagent7037

23 күн бұрын

Go Marty T

Having fun gets the work done faster. Kevin's gun show voice is pretty good. I'm sure everyone in the C&C shop is strong.

Congratulations Tucker!

what great parents and suchh good sons

@mrsclinton

23 күн бұрын

Thank you! We are very proud of them :) ❤

You guys have quite a job ahead, and we are gonna enjoy. From safe distance 🙂

"Congratulations, Tucker"

You always know when the videos are over when Scot shows up.

@unclescottccequipment

21 күн бұрын

That's right!!

I so thoroughly enjoy watching your channel. Thanks fellas. 👍🏻👍🏻👍🏻

I'm glad your clients have deep deep pockets that I can imagine what this is going to be when it's all done, but it's interesting. I really enjoy it. 👍👍🙂🇨🇦

The old girls fighting you guys. Good video Clint. Nice to have the boys there to help. 👍👍👍👍

It’s going to be a heck of a summer!! “The boys are back to town”!!💪🤗🇺🇸

@glennjukes5581

23 күн бұрын

What a song-those wild eyed southern boys--oh, yeaH!!

Voice over segment was really well done. Added some variety at the same time. Great job.

@C_CEQUIPMENT

20 күн бұрын

Thanks

Congratulations to Tucker. As always, enjoy watching your videos and seeing how everyone working together and having fun at the same time

My Friday Special ...really look forward this! Cheers! Here we go! ;-)!!

I like people with common sense, and you seem to have a lot of it, along with knowledge of what you're working with. I hope you can pass those qualities on to your sons.

Gotta love how Clint and Sausage Fingers Kevin are teaching those younguns good work ethics.

Legend has it Kevin was able to audition for The Tin Man after using some anti seize!

What i like about C & C is the owner don't mind getting out of the truck and put his hands on stuff ..showing the younger guy's little tricks of the trade ..Most owners ( CEO ) set in the offices and grunt and point ,you know who you are .. See Ya

Good job guys it should last the customer for years once yous have finished keep up the good work love watching your work

Your videos are amazing because you show life as it happens

Congratulations Tucker.

Kevin needs a promotion to CEO…..Chief Entertainment Officer! You have to have fun at work!

Pretty confident that, that extra long pry bar is the most used tool in your shop. I want one!!! lol

Great video. You all make.my husband belly laugh. Thank you. :)

@C_CEQUIPMENT

22 күн бұрын

🤣🤣🫡

Congratulations Tucker on your graduation.Hunter, the reason Kevin, now you know Hunter had that rod broke loose before you got to it. Thanks for the update gentlemen, enjoying the process.

Great video thanks Clint and Kevin and Hunter and Tucker

Some great step by step progress on the old 450. Slowly checking off all the problems one by one. Good progress Team: C&C.

Good to see people doing work with consideration for the next person to service the machine!

Great job, guys. Congratulations, Tucker. 🎉

Nice video! Just no comments, man your son's grow up fast. Two years ago, two teenagers on their bikes, now a young grown adult welder. Looking forward for the next video's.

Congratulations on your graduation. Love seeing y’all working together and having fun

I’ve been watching an Australian channel working on WW2 tanks and they always heat the broken stud/bolt white hot before welding the nut on and they never seem to break off and they were in there for 80yrs+ 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍🏻

On the mechanical seals onboard Navy warships we arent allowed to touch them on the mating parts. According to the tech-rep a single fingerprint can lead to failure. Love watching you guys work, I learn something new every video.

It is always a great deal of entertaining to watch when Hunter is "in the house" and working with you guys. My wife and I still have a 16 and 17yr old boys in house and that is the way we raise them. It's good for them to be on the receiving end of some shots, builds a bond and character and makes them feel a part of rather than just standing on the outside of things.

Great content Clint, love watching you guys bringing these old girls back to working life.

Thanks Clinton and crew for my Saturday breakfast viewing so funny ,i love seeing people having fun paying each other out ,that where i worked in shops ,good times ,thanks Kym Adelaide

That was the next expert Torque wrench

Another informative and entertaining Master Class in dozer final drive repair! Thank you

Just did an entire undercarriage on a 650j xlt and after watching enough of these videos I went with itr components and took the rails off the dozer for better access just like you said

Nice to see two video's on a Friday!!!!! Makes my day....

Clint, I noticed on different occasions you used a hammer to drive in seals, you have everything in your shop including the automatic butt wiper, but not a set of seal drivers, You can make your own all you need is round stock and a different diameter steel plate that matches the seal your driving in, weld a 3/4 nut to the plate and then cut threads on the round stock to screw in the 3/4 nut then drive the seal in LOL, that's a job, for Hunter or Tucker When their slacking, great video CLINT

Congrats, Tucker, on your graduation and Clint enjoying the comments on the work you do. Great show 👍

Congratulations on graduating, another great video.

Best part about snap-on is their ability to sell you tools that you didn't even know you needed

@harveylong5878

24 күн бұрын

reverse psychological warfare tactics work best to get rid of pesky SnapOn sales people

Epic C & C Equipment repair great video even with the lost audio

THANKS!

Congratulations Tucker for graduating high school. The least you have demonstrated that you can continue for 8 years in grammar and 4 years in high school and finish a commitment that's very important and later in life. When you're looking for a job or doing something, people will look at that. I truly enjoy watching these videos, the camaraderie, the laughter and the teasing is just like when I was younger working with my dad and my grandpa. Thank you very much for putting these out

The race punches are great 😊😊😊😊

Awesome KZread videos. I look forward to your new videos coming every week. show is great. Can't wait to see the red LOL😉

Really enjoy the john deere dozer or highlift videos

Good job boyz!

Gotta say - narration came across as good as the live. Real talent. Great job.

Great video have a great weekend

Very nice boy great job Hunter

Does anybody else have to resubscribe for every c and c video

@williamlloyd3769

24 күн бұрын

No, my notification popped up as expected

@stevenr8606

24 күн бұрын

Mine didn't pop-up either. But, I did see it on my side bar ! 🎉🎉🎉 What do you expect from yuck-tube? 🤔

@matthewferguson2515

24 күн бұрын

No but other channels I have had to go to the bell and change the notification to receive all notifications.

Enjoying your R&m on dozers keep them coming with y’all’s clean and educating videos.

Hey Clinton, You guys are amazing!! I really enjoy watching all of you pretend that you know what you're doing!! :) Thumbs up! Safety first! Jim

That punch worked really well.

Clint the second video turned out great with the rebuild of the final drives. I also like that new style hammer that you used to knock the socket on the drain plug. Waiting on the next video.

Ready to rock n Roll for the summer! The boys are back in town!

Congratulations 🎉🎉🎉, " Tucker " Graduation

Anti-sieze is a must on everything down her in Louisiana!! Keep on with the instruction and teaching! I'm learning a lot from y'all!

Congratulations boys yall have a very awesome future

Love it so much keep it up as always 💘

That's definitely going to be one happy customer when he gets his machine back to work. Reliability out the door is a core value at C & C equipment.

Great video keep them coming please

Just noticed the ceiling fans my lord I like them airplane blades 😅 do they put outmuch air hope everyone has a awesome day love the videos keep up the awesome work

@C_CEQUIPMENT

22 күн бұрын

Yep, sure does! Bigger blades for more air movement at a slower rpm -Kevin

Kevin reminds me of Aron on dirt perfect.

@DeweyCheatumNHoweLLC

23 күн бұрын

Kevin actually works, though

@C_CEQUIPMENT

22 күн бұрын

But taller 🤣🤣🤣-Kevin

Rust belt mechanics are the best

Another great video...Really interesting...Stay safe and see you soon...Congrats to Tucker for graduating High School...Well done

Another great video. Can not wait on next one

Awesome part 2 bringing yet another Ole girl back 100%...cool content as always and appreciate you sharing your day with us.😎🚜🇺🇲🧰🛠️🧑‍🔧🔧😇

Very nice team effort guys Thanks for the video 👍

I truly like the fact that you are willing to do it right

10 bananas mate!

Your one man show and family is always Amazing. Congratulations

thank you for the voice over clint and the video LOL them upper rollers an their oil vapors

I love these videos. I enjoy watching them when I get home and decompress. The ironic part is y’all are working.

Ya'll had me laughing out loud. You're a natural KZreadr, Clint. Good job!

Careful not to 😮 scratch Captain Kleenman's backhoe, or he'll 😢 cry.... again.

Good video thanks for sharing

I so enjoy watching your content and all the comedy thank you

Another award winning video!😊😊

Nice progress 👏 Everyone such teamwork 👏 Thanks for sharing 👍 😊

I we have some heavy equipment at work and I knew a little about repairing some things on them but I have learn a lot more since I been following yall love the videos thay are educational

making the wore out into tight tight thanks for the heavy mechanical videjo have a great weekend boys

Just love your videos thanks so much for posting them

Enjoyed the video guys, you lot turn hard jobs into fun and achieve a lot at the same time. Safe travels. Ken.

thanks guys i enjoy the video

Great work

One of the best punches I've found for belting seals, races, bearings etc are the shafts out of McPherson Struts or out of shockers dependent on what you need one for. Keep up the good work Cheers from Australia😀👍

Thank you Clinton, you do very high quality work and produce great videos!

Very interesting video on the roller replacement. Mine needs those along with new tracks.

Great job so far rollers looking good 👍😎🇺🇸 NY

Great video. Looks like you guys have a good time and get the work done. Keep the videos coming.