Definitely just that section. Doing the entire quarter panel is just adding extra work for no rewards. 😂

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻

@DD87336

3 жыл бұрын

Why didn’t he just straighten it and bondo it ?

The damaged area only needs fixing, no point making it more expensive and would take a lot longer to repair the whole panel. You know exactly what your doing and will do it perfect. I’d be very happy if you fixed my car.

The smaller the section you repair is much more better better than the entire quarter. But it takes a very skilled and professional to do it the right way, just like what you've done. The only way to make it better is if you take it back to the dealer/ manufacture / plant and have them dissemble the entire quarter panel and replace it. Which we ALL know that is something that they will NOT do. Very well done. Impressive craftsmanship Dr. Vladimir.

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻

Just the section made the most sense. Nice work. Really glad you applied the anti-corrosion treatment inside before starting to weld. Just hope you apply anti-corrosion after the welding, before any bondo work. It's a Mercedes!

Good tip that using the strip to cover both sections before welding ..saves any weld blowing through and a much stronger joint.. even stronger than when it came out the factory for sure.

Great as always!!! Nice video keeps up so much fun!!!😊😉

You make it look so easy! Makes me want to do it myself!

Just the section. Less welding, more original parts preserved. Looking good!

@lnccollision

3 жыл бұрын

👊🏼💪🏼🙏🏻

The kind of work you do we or me trust your judgment no matter what other people think you are the pro 👍👍👍👊👊👊✌✌✌

Hi from UK. Been watching loads of your videos and you are 'The Main Man'. Great Vids Dr Vlad and your passion is evident in the work you do, keep them coming. 👍👍

Good job dr vlad. I like just repair the quarter panel like you did.

Your a wise man just replacing the damaged section in these cars and keeping it as close to factory as possible for structural integrity. Why would one cut more than needed. Respect to Ur judgement

👌I think the way you've made the repair keeps more of the original integrity of that read quarter panel.... Looking good 👍

Wow. Looks good.

Vlad, I absolutely agree with your technique. Keep as much original sheet metal on the car.

Great work my friend 👍🏻

You did right, no need to change the whole quater panel Vlad, if other people think you should do that, they are not really experienced at this kind of repair, we do the same as you here in Sweden. Nice work Dr.

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻

Vlad, excellent job!!!! I'm with you regarding the quarter panel my friend.

Great work

Every time I see this guy work I'm amazed!

Loving it as usual bro!

Great video as always

Great job!

Top job......you have the knowledge....!

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻🙏🏻

Nice work! :)

Great video my friend, excellent repair from Dr Vlad as usual, please remember to put the sound proofing back in above the wheel arch before welding it back up otherwise there will be a lot of road noise from that corner 👍

good working and good luck

Nice job dude !

I’m from Malaysia & I’m very enjoy to watch ur video everyday ur job was perfectly great very nice I can’t see any workshop can do this in Malaysia

Once again the Doctor In and ready to proceed to plastic surgery. Great tip on the inner support between panels. If budget was not a problem entire quarter would be removed and replaced but saving money and time for the customer

Wow crazy good Job Love it can t wait on next Video 👍❤️👍

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻🙏🏻

Great work as always my friend 👍🏼

MY MAN VLAD IN THE HOUSE!!!

Hhh mr vlado good idea to build only the side that you hqve done i'm fan nice job let's see the final result

Bro bro broooo,,,❤️❤️❤️❤️❤️❤️❤️❤️... Soooo Professional and perfect work done👍

@lnccollision

3 жыл бұрын

Thank you my friend for all the love 👊🏼

@shardulsoundankar6921

3 жыл бұрын

@@lnccollision 🙏👊👊

Taking shape.... wise decision about the "dog leg" why do more than is necessary ...

I love your job, you are awesome When I see a damaged car, how do I fix this? I learn from you, in fact I love seeing you do the hard things Go on, my friend

@lnccollision

3 жыл бұрын

Thank you my friend for all the love 👊🏼

Perfect fix

Another excellent video, doc Vlad! About the panel, just that section is the right thing to do! Let’s shining my friend! See u next video!

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻🙏🏻

Dr. Vlad, I would section it as you did. Many manufacturers now make replaceable dog legs for cars. Good job my friend!!

Waiting for the AMG style conversion... going look sweet. You do great work Mr. Vlad!

just section, nice work

This channel & workman ship is ABSOLUTLEY stunning,never fails to amaze👍✔️👏

@lnccollision

3 жыл бұрын

dave wallbank thank you my friend 👊🏼

@davewallbank7678

3 жыл бұрын

LNC COLLISION & CAR CUSTOMIZATION You have my Support 110%👍👍👍

@lnccollision

3 жыл бұрын

dave wallbank 🙏🏻😊

Good job

Учу английский язык по вашим видео! Классные видео, вы молодцы

when you’re doing this kind of panel repair it would be great if you pointed out that the outer skin of metal is actually ‘non-structural’. The rockers (sills in the UK) and A B and C pillars are all multi-layers of metal with key parts made from extra strong boron steel for rigidity. When you cut in the repair section the little tabs are often called ‘gussets’. You did a very professional job. If anyone wants to see more major car surgery they should check out Arthur Tussik on KZread . someone’s going to get a sweet Mercedes!

You picked the right section!

Only that section, Vlad. It really doesn't make sense the other way.

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻

The Dr working with a smile enjoy what you 👍🏾 great work 💯

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻

@kensonAyers

3 жыл бұрын

LNC COLLISION & CAR CUSTOMIZATION Wish could gotten a build bit all the way in trinidad

Dr Vlad keep up the good work love watching. Should only replace the damage part as you have done. Look forward to part 3.. 👌🏾

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻

nice man

You will not be able to replace the bag of anti-vibration foam, otherwise it may burn due to the welding ?

If it was mine I’d do that section as well, if it’s a customer I’d do whatever Mercedes says. Clean work as always bro

С удовольствием смотрю твои видео

Приятно посмотреть.👍

A favor. Could you spend a little time the next time you section a quarter panel going over how to measure, mark, and cut for the replacement piece. I'm always curious how you get it to match up that well. Liking this rebuild so far. Can't wait for the GLE 63 parts to make an appearance.

I think the sectioning is fine...and agree, do the minimal invasive "surgery". How come you did not put weld through primer on the "backing plates" you made on the joints? Shouldn't that bare metal be coated before sealing it all up?

Dr Vlad in the house, first time clicking so fast.

@lnccollision

3 жыл бұрын

My man 👊🏼

I am curious, how did you know where to cut the new section of the replacement quarter panel? Please show the process next time. Thx.

@nickmoore4212

3 жыл бұрын

You cut above the damage it's a custom job basically so you only use what you need

great job, you working smart. What's name your frame machine ?

Just exactly the way you did it. Why replaced sheet metal that isn’t damaged?

LNC 💪

I wish you could change the rims too. Great video

@lnccollision

3 жыл бұрын

Yes different rims and gle 63 bumpers

Золотые руки! Watching from KY.

@lnccollision

3 жыл бұрын

Спасибо большое 😊👊🏼

Another 👍 job

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻🙏🏻

I definitely would only change the small section.

Great work dog leg only unless someone just had to have the whole qtr swapped out love the video vlad

Just the "dog leg" my friend 🇿🇦🇿🇦🇿🇦🇿🇦

What's the tune at the start of the video called? Driving into your unit ... Got a link?

Hey Vlad i will bring it to you ha ha ha you know best and surely do it better than me thank you for the knowledge ciao from Italy

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻🙏🏻

We need more than one video a week Vlad, make it happen!

@lnccollision

3 жыл бұрын

Sounds good my friend working on it.

Only damage part Dr Vlad 👍🏽👍🏽👍🏽

You make great work! i want a LNC Shirt Haha. Greetz from Germany ❤️👍

@lnccollision

3 жыл бұрын

Maurice Wirths thank you my friend, you can get one www.lncmotorsport.com

you did it right

Yep nice car nice work from a UK suuubbbbbbyyyy

It is rigth to chance only that section because changing the entire quarter panel is more work. So fast vlad!!!

At first I thought you should have replaced the entire quarter panel however, once done I think it’s fine the way you did it.

Vlad, you already know that you only remove what is absolutely necessary. Another great job and video.

Section it. I’d use the extra cash to help for you guys to do an AMG conversion. Awesome work Dr Vlad.

@lnccollision

3 жыл бұрын

💪🏼👊🏼🙏🏻

Only change the Dog Leg section, Safer and Quicker

The D.O.C.....

You are right ✅ Vlad its good to keep the factory seams in fact it is probably stronger 💪 than factory now great job " what happened? Nothing happened ! Lols keep the great work 👏 👍

@lnccollision

3 жыл бұрын

Rashid Mohammed 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻

Only the section.

👍👍👍

why didn t you prime the strips

Technically you can’t section it there but if it’s salvage and yours, just do what’s easier

👍

How can I buy this car?

I like it

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻🙏🏻

@mam9544

3 жыл бұрын

how do you get an LNC cap or T-Shirt? I from Indonesian

@lnccollision

3 жыл бұрын

Aris Munandar www.lncmotorsport.com

I plan on starting a shop, how did you find good workers when you started your shop? I dont fix cars but want a collision shop.

@FBI-yd6co

3 жыл бұрын

I recommend starting off working for some one not worth learning on your own. And after time you’ll meet good workers that you can hire

👍👍🔥🔥

Brasil

👍👍👍👍👍👍

Hey would you ever consider buying a wrecked BMW X5 the new shape absolutely amazing cars

@lnccollision

3 жыл бұрын

Aqib Hussain yes, just need to find a good deal.

What the website that you bid to buy the broken car like that and that you buy the car spare part. please tell me. I want to be like you all. My dream is want be the professional mechanic like you guys. I'm students from Malaysian 🇲🇾

@lnccollision

3 жыл бұрын

Iaai.com usually I try to find parts a local junkyards

Unless you’ve ever actually replaced a full quarter panel, you have no idea how much is actually involved, if you can replace a small section like that, it’s just as good of a repair, and you leave as much original as possible.

@lnccollision

3 жыл бұрын

🙏🏻🙏🏻🙏🏻

👌🏻👌🏻🤙🏻🤙🏻🤙🏻

Apsoltly not in this case good job 😀

I would change exactly what you changed

Bruh. Longer videos. Your good. Great to watch and learn But 20 minutes yo that's a warm up. Need longer videos Appreciate you. Thanks