Flex seemed the strongest/fastest. Dewalt seem to be the best with sawdust, it stayed the cleanest

That's awesome brother! I always wanted to buy the Metabo rear handle saw! Carpenters are awesome bro! I'm chiming in from Northern, New Brunswick, Canada!

Good test! I think Metabo HPT is one of the most underrated brands on the market. It’s not just the saw, all of their tools run exceptionally smooth.

@IMPACT-NATION

Жыл бұрын

Man your not Kidding! They are killing it! I have the rear handle, the 36 volt triple hammer and the 36 volt sawzall. They perform just as good as any brand in most cases better. The 36 volt recip saw is probably the fastest in the world. The triple hammer is 🔥🔥🔥. This rear handle is so light I carry it around all day back and forth. Not the fastest but fast enough. Thanks for the kind words brother. I definitely appreciate it ✊

@Eyespy11

Жыл бұрын

@@IMPACT-NATION and they’re less money on average than the “big three” I have the triple hammer 18v - it gets the job done!

@IMPACT-NATION

Жыл бұрын

@@Eyespy11 from what I’ve heard if you stick a Multivolt battery on the 18 volt it performs just as well as the 36 man. I’m sure there’s a small difference but not much.

@dylanwheaton2785

Жыл бұрын

@Dominick Nardolillo just put multivolt battery in the 18v line.. will run forever. Want the 7 1/4 and haven't run into anything my 6 1\2 18v can't do.

@IMPACT-NATION

Жыл бұрын

@@dylanwheaton2785 is that the deep cut model? I’m not familiar with the 6 1/2. Was wanting to get my dad a powerful 6 1/2 cause he’s mainly just cutting 2x4 material usually and a good 6 1/2 would be perfect for that. The only rear handle of mine he’ll use is the hpt cause the weight. I might look into that. Thanks brother

Awesome video and test. Love the channel and appreciate you brother! All the best.

@IMPACT-NATION

2 жыл бұрын

✊🙌 Thanks man. Just a little video so people can see how these saws hold up under heavy load. We appreciate the comment brother.

The young man’s already got his Dads passion hahaha, Love and Support as always Brother! Happy to see you really catching steam, got a heart of gold Brandon! Thanks for another great video, honestly made it easy for me to see that buying this would be pointless in my line of work. Honestly your right brother, when it comes to tools they all get the job done.. Preference, preference, preference. If I could request a video though? I am curious as to which saw has the longest battery life.

@IMPACT-NATION

2 жыл бұрын

Thanks buddy. Yeah man, if you don’t need a huge rear handle saw, then I would go with what makes sense. Unless you come across an amazing deal or you could write the tools off if you had a business. Comes down to what you need instead of what you want. Just from that cut a lone all 3 saws lost a bar of battery, but only the metabo went back up to 4 bars after it rested a few minutes. That would make for a great short in a Timelapse or an outro. Great idea man. You take care Athannael and have a great weekend bud. Thank you 🙏

@athannaelanderson3806

2 жыл бұрын

@@IMPACT-NATION Anytime Brother, thanks you too.

Great job…eager to watch more videos and learn from you…👍👍

@IMPACT-NATION

Жыл бұрын

Well thank you. I appreciate the positive feedback and I’m glad you enjoyed it. We made the switch to cordless saws not too long ago so I’m still learning the in’s and out’s myself. I have great things planned for the channel. Thanks for the support

Keep making videos it helps me a lot!

@IMPACT-NATION

7 ай бұрын

🙏🙏🙏

I definitely like the Metabo but I already needed to scratch some more degree markers into the bevel adjustment because it only goes in increments of 5. Also needed to reach for my DeWalt sidewinder for 57° cuts on the roof I'm doing because the Metabo only goes to 53°. Obviously those are some fairly uncommon needs from the saw so most people won't run into that. Solid tests bro.

@IMPACT-NATION

2 жыл бұрын

Love that metabo man. The Flex goes up to 56 I think. I’ll have to double check. The depth and bevel were super tight man when I first got it. I oiled them both and the actions a lot smoother but still pretty firm. Thanks man

Been seeing you around the other tool tune channels a while but just now watching one of your videos 👌🏼& am now subbed…I also wanted to say that I like and appreciate your style, coming off as a genuine, knowledgeable and passionate tool lover that’s never too good to take the time to reply to a question or say hey & all while being thorough, honest and unique. that combined with a great vids like this is a winning combo in my book 🏆 I love the MHPT multivolt line. Probably one of if not the most slept on, overlooked and underrated power tool companies out there in my book.

@IMPACT-NATION

Жыл бұрын

Jeff I can’t tell you enough how much that means brother. I try to keep things as simple as possible. I’m still very new to filming and editing. I wish I had way more time to devote to the channel. Concrete man by day and a Dad to a beautiful 5 year old boy 24/7. I wish his mother would straighten up and be involved in his life but she’s battling her own demons. Hopefully she gets help and I’ve offered more than any. My family is a huge help with taking care of him. My mother watches him while I work. I’ve been in recovery ever since he was a couple months old. I tell you buddy, if getting shot in your chest and left for dead in a parking lot, being locked up in jail and treatment centers, and being blessed with a beautiful child still wasn’t able to get me to stop. I had to dig deep in my soul and want my life back. Nothing can change you if your not willing to change. That’s what I found inside of me. The WILL. The will to fight, to live, to never give up, to be the best father I can be to my son. The last relapse I had I lost everything. A great job, my apartment, my vehicle and almost lost custody of my son. Things are good now bro. I had to swallow my pride and move into my Dads place at 35 yrs old and start over. I’ll get me and my son our own place soon enough when I feel comfortable being on my own again and can afford to support us by myself. I’ll get there. Thanks for listening bro and I appreciate the comment. More than you know brother ✊

@Jeff-rk8hq

Жыл бұрын

@@IMPACT-NATION and look man from 600 to 20k now brother. I truly hope you’re doing well man much love from Indiana

@Jeff-rk8hq

Жыл бұрын

Hey buddy just wanted to stop in show love…think about this just less than a year later and from 500 to 20k, I really am genuinely hoping you and you’re lil man are doing well. Keep your Head up and piss clean my guy, I’m truly rooting for ya. Much love from Indiana bro 🤙🏼

@IMPACT-NATION

Жыл бұрын

@@Jeff-rk8hq Jeff, my man🤛. Good to hear from you brother. I never forgot this comment from you man. I’ll always remember it. Thank you bro. Me and my little dude are still trucking along. Everything is good. Hope all is well on your end brother. Not too far from you. Down here in Louisville Kentucky. Never know, might cross paths one day my friend. Thanks for stopping through buddy. I sure do appreciate it 🤛

@IMPACT-NATION

Жыл бұрын

@@Jeff-rk8hq still pissing clean my dude😂. I don’t ever get too comfortable in my recovery, the Devils always dancing in the parking lot waiting for me to fuk up. Gotta stay on the grind😂.

Sweet vid! Subscribed!

@IMPACT-NATION

Жыл бұрын

Thanks brother. Really appreciate that and glad you enjoyed it

Look at you go!!! Here you speak your delighted to have 700 subscribers. Now your at 19000k.

@IMPACT-NATION

Жыл бұрын

😆 my dude we keep it Pushin round here buddy🫡. I almost forgot about this video. That cut I did with the Flex was terrible 😂. I think I even went through the Dewalts cut a couple times so much sawdust. Thank you. I’m never to busy to respond to positive and supportive comments because without people like you this channel would have never grown. I truly appreciate it my friend

Love the video

@IMPACT-NATION

2 жыл бұрын

Thanks Rick. You know it’s much appreciated brother👊. I’m going to be taking a small break for a few days. Going to be changing up my content a little bit. Hopefully for the better but I’ll be back soon buddy✊🙌

Damn missed a bunch of your videos😎🛠️😎🛠️😎

@IMPACT-NATION

Жыл бұрын

It’s hard to keep up with everyone’s content Ted. I’m the same way brother 😆. We watch when we can. All we can do✊. Your always welcome and a great friend. Just want you to know we appreciate it buddy

Great video

@IMPACT-NATION

Жыл бұрын

Thanks man. I appreciate that Anthony. Glad you liked it brother

Great vid keep posting

@IMPACT-NATION

2 жыл бұрын

Same to you man. You already know I’m a fan of the channel brother ✊. Thanks

@ovi1013

2 жыл бұрын

@@IMPACT-NATION that metabo is a beast

@IMPACT-NATION

2 жыл бұрын

Probably my favorite to use at work for sure. You weren’t lying about the Flex bro, straight Monster of a saw. I need to get that XGT next. Or another Fuel. I sold mine like a dumbass

I’ll take the metabo it’s less expensive weighs less batteries are cheaper and it has power. Weight was a big factor for me I ordered one today

@IMPACT-NATION

Ай бұрын

Brother the metabo might not have the speed of the other two but it’s not lacking by much. Out of all 3 saws in this video the Metabo Hpt is the only one I have left. I love it man. Super light. I keep a metal blade on it to cut rebar. The lower rpm’s really helps when cutting steel

Nice video! I settled on the Metabo simply due to how lightweight it is.

@IMPACT-NATION

Жыл бұрын

Me and you share the same affection for that tool😎. Absolutely love it. It’s great for cutting metal as well with the right steel blade

I like the discharge of saw dust on the flex.

@IMPACT-NATION

7 ай бұрын

Definitely me too bro. The Dewalt is pretty good but I love that dust port on the Flex👌

Thank you!!!

@IMPACT-NATION

2 жыл бұрын

😎🙌🙏✊👍👊💯

Nice job boss

@IMPACT-NATION

Жыл бұрын

Thanks for the kind words man. I look back on these videos and see so many things I should have done different. We all have to start somewhere though😂. I’m glad you enjoyed it my friend

goed video INT

@IMPACT-NATION

2 жыл бұрын

Thanks buddy. I’m not 100% happy with how it turned out. Music was way too loud but I’m still learning. Thanks for stopping through man👊

Father, American flag, and power tools........... my man! 🧏‍♂️

@IMPACT-NATION

8 ай бұрын

An awesome combination 😂. Thanks buddy. I sure appreciate it 🤛

IMPACT NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Total agreement on the Surge! Nice review, just came across it. Peace. Stay safe! 👍

@IMPACT-NATION

10 ай бұрын

This was early on man😂 but thank you. Really appreciate it. You take care and stay safe as well my friend 🤛

Nice awesome! You probably already know this bc I mention it all the time. Flexvolt is probably the most powerful, but makita and metabo hpt are my most utilized saws. Usually the flexvolt is on site if im doing a lot of engineered lumber. Unfortunately don’t have the flex yet.

@baseballdude8491

2 жыл бұрын

We had to get another Metabo HPT cuz our crew was fighting over the other two that guys now prefer over our old favorite- Makita 36v The Milwaukee rarely gets used except for some rough demo work and the Flexvolt is paired with a Prazi beam saw cuz it wighs so much and does have good power We are using the Metabo HPT rear handle in applications we used smaller and lighter saws in the past but because of it's weight and performance use it everywhere

The Flex is an Awesome Saw but I couldn't even see it after just 10 feet of cutting , the dust port really sucks on that saw ......👍🖖

@IMPACT-NATION

2 ай бұрын

Moist lumber absolutely bro. It clogs like crazy. The dewalt does really good with dust

this was nice distance run test. Great idea.

@IMPACT-NATION

Жыл бұрын

Thanks bro. Just a quick comparison of how the saws eat cutting deep. The flex and dewalt shine in that area but the metabo, all though slower, is way lighter and still powerful enough to cut whatever. It’s all personal preference on what we like though. To each their own 👌

Good luck with the channel !

@IMPACT-NATION

2 жыл бұрын

Thanks man. Really appreciate that. Same to you brother. Your content is awesome 💯🙌✊

Looks dusty. They are looked great

@IMPACT-NATION

2 жыл бұрын

Huge mess! The Flex seemed to get clogged the most

Very good content but music messed it up, couldn't hear the saws

@IMPACT-NATION

8 ай бұрын

Yeah I’ve learned that man😂. This was one of my earliest videos. Definitely toned the music down sense. Thanks for watching and commenting brother. I truly appreciate it man

Nice video! How's the weight with the flex saw?

@IMPACT-NATION

Жыл бұрын

Typical rear handle weight distribution on the Flex. A touch heavier than Dewalt. It’s nowhere near the cordless Skilsaw weight though🤣. Not bad at all. Extremely powerful with that stacked lithium battery man. Thanks for comment brother.

Did that flex dust port clog? It worked good in the beginning.

@IMPACT-NATION

Жыл бұрын

Pretty sure that’s what happened man. This lumber was a tad wet. The dewalt dust port works really well but it shoots all over you. The flex design is way better though. On lumber that hasn’t set out in the rain for awhile the Flex never clogs. Also running at full depth doesn’t help

У Флекса плюс+ , то что выброс опилок справа! Почему не было Макита drs780?

Just a heads up on these rear handle saws they are just sidewinder in disguise with a rear handle and blade on the left, they don't have gearing of a true worm drive, I wouldn't recommend doing cuts like that you can burn the motor out

@IMPACT-NATION

Жыл бұрын

I can agree with that. Helical (which I’m assuming they all are) are designed for high load speed but the worm gearing would definitely be ideal for full depth high torque cuts. That’s why I don’t like pushing these saws as fast as I can in these types of cuts. Especially the lower rpm metabo hpt. Thanks for the comment brother

@ty0285

Жыл бұрын

skilsaw makes a true brushless wormdrive 920 cdn. I bought their home brand brushless saw figured I'd give it shot on jobsite as it was 400 cheaper.

Laugh at me bro. I had to watch this video again man. I had had to see that Flex in action again No one on KZread has this kind of endurance test man. That DeWalt sounded like it didn't drop off power but I could see the blade better on the Flex. . I was watching your hand and it seems like you had a straighten line more on the Matabo and Flex. By the way is the Flex the only saw with a light or it that the light is so much brighter than the others? Correct me if I am wrong.

@histguy101

2 жыл бұрын

The Metabo HPT does not have a light, and I'm pretty sure the DeWalt doesn't either. A lot of them don't. They're heavier to begin with and have great line of sight on both sides of the blade, so they don't really need one. I don't think the Makitas have a light either. The Milwaukee has a light.

@IMPACT-NATION

2 жыл бұрын

Only the Flex that I’m aware of brother. Could be wrong. I know the fuel does and maybe the Xgt but I’m not 💯 on that. Yeah I’m a lefty. Cutting right handed is still foreign to me. None of those cuts are straight 😆🤣. Plus with the saw dust and trying to keep the saw in frame…🤞🤞😆. I would have ran the Milwaukee but I don’t have it anymore. Thanks for the comment Rick. Much appreciated man

@rickyperkins232

2 жыл бұрын

@@IMPACT-NATION you know what the Flex is the ticket, there many times I have to cut in low lights and I got spoiled with the Milwaukee rear handle because it has light, I just can't go back to a saw without light.

@IMPACT-NATION

2 жыл бұрын

@@rickyperkins232 I’d go for it buddy. I know you’ll be happy with it

@rickyperkins232

2 жыл бұрын

@@histguy101 yesterday I purchased the Flex rear handle and their blower from Ohio Power Tools, they didn't have any in stock, so the waiting is going to kill me because I need to use this saw like right now, lol. I have the Flex 7 1/4" but I will never use it because the blade is on the right and when I bought it I assumed it was on the left.

So here comes the question from a biased guy. If you had to choose one saw only, which one would it be and why. I have a Milwaukee rear handle and I love it but one of those three saws will replace it. I am a blade left saw guy only so 6 1/2" and rear handle is my thing.

@IMPACT-NATION

2 жыл бұрын

I had the Milwaukee rear handle for a while and loved it. Only complaint I had was the heavy 12.0 battery. I use to run it with 2 6ah switching them out through the day. Gave me identical power as the 12 but just less run time and way less weight. I sold it and bought both flexvolt sidewinder and rear handle. Awesome as well love them both. The only reason I say the metabo hpt is that it’s the lightest saw, not as much power as the others but enough power to accomplish any task. Great batteries and run time and they’ve been running deals. But the saw for 199$ get free battery and charger!!! But if you have the extra money and want a pure powerhouse monster of a saw that cuts smooth, go with the Flex.

@IMPACT-NATION

2 жыл бұрын

It’s hard answering questions like these cause everyone preferences are different you know? I love the Milwaukee, the flexvolts, the metabo hpt and the flex. They are truly all great saws. From a price point view go with the metabo. If you have the extra bread and in the flex line go with flex. But you said if I had to choose one?…..ahhhh that’s tough Rick…. My personal opinion, Metabo Hpt bro

@rickyperkins232

2 жыл бұрын

@@IMPACT-NATION lol, so I have the Milwaukee rear handle saw and one day I had to make 6 cuts over my head, after I finished I thought that was the most dangerous thing I ever did with a saw. Almost all 6 1/2" saw on the market was tested, all had the same results, All was nice, safe, small and light weight to cut overhead but didn't have the power off the Milwaukee. Lastly I tried Flex inline and it was the pure truth. So I want to retire my Milwaukee for the Flex rear handle I heard it blows and clear the line of sight like their Jigsaw, is that true?

@IMPACT-NATION

2 жыл бұрын

@@rickyperkins232 I’ll have to check on that man. As far as me using it at work for the cuts I generally make I don’t have any issues seeing the line. I’m left handed so usually I’d go off the tick marks on the shoe marked zero while following the line but here lately been practicing right handed. Has a great line of sight. If you want the flex I’d go for it bud. Trust me when I tell you, after you make that first cut, the first word out of your mouth will be, Fuck yeah!!!

@IMPACT-NATION

2 жыл бұрын

@@rickyperkins232 🤣🤣it’s definitely awesome bro. They did a great job designing that thing

What does speed x 1.5 mean?🤷🏿‍♂️

@IMPACT-NATION

2 жыл бұрын

The footage is going at 1 and a half times the normal rate. It’s sped up a little to keep the overall length of the video down.

By the way happy father's day belated

@IMPACT-NATION

2 жыл бұрын

🙌❤️💯👊✊🙏. Thanks my man. If you have kids, happy Father’s Day as well brother

@rickyperkins232

2 жыл бұрын

@@IMPACT-NATION I appreciate that man

@IMPACT-NATION

2 жыл бұрын

@@rickyperkins232 of course brother👊

Am really surprised by the metabo

@IMPACT-NATION

2 жыл бұрын

It’s awesome. Love it. Not as fast but I’ll sacrifice speed for saving a little weight anytime. The Flexvolt will always have a place in the industry until a next Gen comes out, metabo is a keeper for sure, and the Flex is definitely a top competitor. Has all the power you’ll ever need

Put a Diablo blade on each of them and you won't notice a difference from each other

@NickOvchinnikov

Жыл бұрын

And I don't think anyone knows the Metabo is 7 something pounds

@IMPACT-NATION

Жыл бұрын

Yeah that’s what’s so great about it man. It’s one of my favorites. I think it’s 8.4? With the battery. Crazy light. My dads pushing 60 yrs old and that’s the only rear handle of mine that he’ll use😂. A little slower on the RPM’s but well worth cutting a touch slower with way less weight. And to be honest if your just cross cutting 2x dimensional it cuts fast enough especially with a &sharp blade

dewalt for the dust management.. can't cut what u can't see !

@IMPACT-NATION

Ай бұрын

That’s true my friend. That Flexvolt rear handle has been kickin ass for almost a decade 😂

Who won

@IMPACT-NATION

7 ай бұрын

Nobody. Just a show of the saw’s cutting. You can tell many different things if you watch close. Even with a steady hand a saw can wonder, the dust port, motor pitch cutting that deep, etc etc bro