I looked at tons of vids that only showed the front brake switch, so glad you had one for the rear, which is the problem I have. Thanks!

@LoneWolferGarage

2 жыл бұрын

You are very welcome and I hope it helped swap out that pesky little bugger!

I like your sence of humor. Great job. Now I better work on mine. Thankyou

@LoneWolferGarage

2 ай бұрын

Thank you for watching! And hope you have this project done and in the rear view.

Good quick to the point video… and great finger dexterity

@LoneWolferGarage

9 ай бұрын

Thanks! I have found that the dexterity has improved by challenging myself by working by feel on “easy/simple” projects. Has improved my ability to work quickly in places where I definitely can’t see anything.

Very good video. Not to long and very good filming. Thanks

@LoneWolferGarage

Жыл бұрын

You are very welcome!

Very cool bike mister !got the same problem but on my all weather XT660Z 660 road adventure dirt bike so same repair ,there’s a cool Harley Davidson bike shop down the road from me franchise dealer,here in uk ,Britain ,sells new Harley’s and parts but pattern parts easier to buy quicker long wait for original so good price did you get part off shelf straight away.dodgy brake light switch misery😮good tutorial dude!😮I also bought a cool red box accessories bleed vacuum kit,cool stay cool dude .do it the easy way.stay legal man,good advice dude.

@LoneWolferGarage

9 ай бұрын

I am very lucky to have three HD Dealerships within 30 miles of where I live. So I usually have choices on which place to get a part same day. And thank you for watching and glad you enjoyed!

Got the same problem with my KTM RC390. Luckily I did the forced connection test and the brake light came on so it's just a banjo switch to replace. £27 though.....ouch.

@LoneWolferGarage

3 жыл бұрын

I don't know if i should thumbs up this one for getting it sorted or thumbs down it for it costing that much! Glad you got it sorted. Great feeling figuring it out and making it work with your own two hands.

I was always told to use new washer to avoid leaks. I got a brand new banjo bolt for my new rearsets and it immediately failed.

@LoneWolferGarage

3 жыл бұрын

I think that is a good precaution as washers tend to be inexpensive insurance. I have changed out a few of these and never had an issue with them leaking at the washer. And I will be honest, I did this quick to get the bike back on the road so I didn't have any down time. I am by no means a great mechanic, or the most meticulous as times.

Just wanted to say thanks for the video

@LoneWolferGarage

Жыл бұрын

You are very welcome! Thank you for watching.

Such a little annoying part but in my country you won't pass inspection. Its cable operated on my bike and it gets stuck all the fucking time ...

@LoneWolferGarage

9 ай бұрын

That stinks that it gets stuck all the time, what a time suck.

Thank you!

@LoneWolferGarage

Жыл бұрын

You're very welcome. Thank you for watching!

Question if this fails will it not work on the front hand brake as well?

@LoneWolferGarage

2 жыл бұрын

The front hand brake has its own switch. So if one fails, one will still be working so you have brakes lights to warn people behind you until you can repair.

@tkong35

2 жыл бұрын

@@LoneWolferGarage shit they are both not working do u think it can be a fuse?

@LoneWolferGarage

2 жыл бұрын

Could be. Could also be a ground issue. But I would start with checking the fuse.

I think mines a wiring issue cuz I get nothing with a paper clip. Where do I start. Everything under the rear fender is ok I check it all. I think maybe the connector is so corroded it needs to be replaced

@LoneWolferGarage

2 жыл бұрын

The fuse would be the first place I would check if I suspected it to be wiring. Then search for any frayed or exposed wires leading to and from the brake switch.

@micc4044

2 жыл бұрын

@@LoneWolferGarage that fuse would be one of the 4 in that box above the switch

@micc4044

2 жыл бұрын

@@LoneWolferGarage or is there a in line fuse somewhere I'm not aw aware of. All the fuses are ok under that pannel in the box

YEA BUT IF THE REAR SWITCH IS BAD AND LGTS STAYS ON AND WONT GO OUT U CANT TELL IF FRONT SWITCH IS WORKING CAUSE LGT STAY ON RIGHT CAUSE MY 4 WAYS ONLY WORK IN FRONT AND IS THE REASON FOR THAT IS BRAKE AND 4 WAY SAME THING SIGNALS WORK CODE READS REAR BRAKE SWITCH 2018 FLRT AND THX

@scottbradshaw5249

Жыл бұрын

When my bike gets hot, brakelight stays on, even if you disconnect the wires to the rear brakelight switch it stays on. Once the bike cools down it works again. Can't figure it out.

Thank you sir

@LoneWolferGarage

2 жыл бұрын

Welcome, hope it helped get the lights back on for ya!

@Macho_Sebacho

2 жыл бұрын

@@LoneWolferGarage I hope so I just ordered the part!