The "oh, he wants to race" got me good 🤣

@HeadlightRevolution

Жыл бұрын

Right! 🤣

@KodyS-hs3md

9 ай бұрын

i would race you in a 2nd gen pro charged tacoma vs the raptor lmfao@@HeadlightRevolution

@qorky92

6 ай бұрын

i might've lost but i wiuld have raced u in my 05 dodge dakota

You had your lows on?? Couldn’t even tell your headlights were on until you flipped the highs on 😳

@HeadlightRevolution

10 ай бұрын

😅😅

@Kyle17206

5 ай бұрын

Because the dude in front of him is throwing so much light on the ground in front of him

@crs1474

5 ай бұрын

@@Kyle17206cameras usually pick up whiter light better than other Kelvin temps. I get about the light in the ground but that wouldn’t prevent the camera from picking up light from the car with the camera. I see the reflection on the tailgate but what about as he’s passing him?

@Kyle17206

5 ай бұрын

@@crs1474 I do agree, they do look much dimmer. My headlights on my old truck used to get washed out by other headlights to the point where it was hard to tell if mine were even on because they were so much brighter. Could be a similar case, or like you said it could be some camera trickery too

@wolf-eat-tiger

5 ай бұрын

@@crs1474you can clearly see his low beams lighting up the back of that Tacoma like it’s daytime. His headlights are pointed so high that none of the beam pattern points at the road

Bulb orientation is also important. Sometimes, depending on the bulb, if it's installed properly, you don't need to re-aim them. However, I should always check em anyway with tires properly inflated on a level surface.

If you can see the person’s rear view mirror in front of you, headlights are too high. If you can’t see the car’s rear bumper, they’re too low

@harry554

9 ай бұрын

yeah and at what distance

@FaithyJo

6 ай бұрын

This is why I carry one of those Temu focused flashlights with me. When I get the big shine from improper headlight aimage or tailgating me with your high beams, you get a 🔦 to the face.

@Justin12833

4 ай бұрын

@@FaithyJothen the lightbar happens

The truck in front of you has perfect alignment for his headlights. It's only supposed to be about 40 feet out from in front of your car. Yours is literally going to blind anybody in front of you. Because it's shining right at the sky

@gtcam723

3 ай бұрын

40 feet is going to put you WAY overdriving your headlights at 60mph.

@mrblutifultm

3 ай бұрын

@@gtcam723 You do realize your headlights are attached to the front of your car. You can't outrun them 🤦‍♂️

@gtcam723

3 ай бұрын

@@mrblutifultm you do realize you need enough light far enough ahead of you to actually see stuff in time to avoid it…. Right?!?!

@mrblutifultm

3 ай бұрын

@gtcam723 Is that how that works...

@roman5256

3 ай бұрын

@@mrblutifultmlegally supposed to shine at least 150 feet infront of the car

people , fix your beam aim!!!!! lol

Flat (loading dock) pull up to the wall mark the light cut off line to the top of 2” painters tape. Back up 25’ adjust lights so top of cut off line is at the bottom of the painters tape (check loading dock for level….)

@Nayr747

7 ай бұрын

You should also have someone about the same weight as you sit in the driver's seat while you adjust them. Owner's manuals even say to do this.

I get blinded by so many user installed LED headlights

@HeadlightRevolution

7 ай бұрын

That's because they didn't aim them correctly! (Or bought really low-quality LEDs)

@gtcam723

3 ай бұрын

I wonder how many are LEDs in reflector housing designed for halogens.

I don't know if I've been doing this wrong.... but for as long as I can remember, I always adjust my low beams to as high as possible, WITHOUT blinding on-coming drivers. I do this by adjusting the lights and leave the truck on the street in front of my house... then I drive my other car and go to end of the street and drive back to see if my truck's low-beams are blinding or annoying to my own eyes.

@HeadlightRevolution

Жыл бұрын

This is how we do it! kzread.info/dash/bejne/gX2j2ZeSl8e4otI.html

@kjrwhs2003

Жыл бұрын

I readjust to factory specs, or as close as I can get it. Gives you the best cutoff line and it's to factory specs. This way there should be zero issues.

@HeadlightRevolution

Жыл бұрын

Factory specs are great to follow too as long as the ride height hasn't changed!

@kjrwhs2003

Жыл бұрын

@HeadlightRevolution exactly! I swapped out headlamp assemblies from halogen to projector in my 2018 journey and followed the factory specs. It's a great starting reference.

@morpheus8233

9 ай бұрын

You are a hero sir

Using the Smith System, you should look or be clearly able to see 10-15 seconds ahead of your vehicle at all times, according to your ground speed. So, roughly 200 to 250ft ahead is considered adequate. If that can be achieved without harming or blinding others would be sublime. In some setups it's almost impossible to accommodate everyone or anyone accept the proper fitment and safety per your vehicle.

As long as you aren’t blinding someone and aren’t planning on getting 5 feet from their bumper, LEDs are great, otherwise jus be prepared for someone to throw a D battery

@xDownSetx

6 ай бұрын

LEDs are fine as long as they're designed to work with the stock headlight housing. The low beam has to throw light in a specific direction like halogens do. The shitty LEDs will just throw light in every direction.

@Solvinplat

6 ай бұрын

@@xDownSetx i just think we should limit the power on LEDs, no reason you need to have brights for lows

What tail light bar is that on the tacoma's rack?

I thought left/driver side was intentionally lower than right so opposing traffic won’t get blinded…

@Drago0900

5 ай бұрын

You can set it up like that if you want, or you can make them level. Thats done with the adjustment screws

@MrBoroski

5 ай бұрын

@@Drago0900well, yeah lol. I’m talking about from factory, how it’s set initially.

@dufonrafal

Ай бұрын

No, absolutely not. Both headlight should be exactly a the same level. However, the beam pattern is asymmetric. It's flat to the left, but goes up to the right.

Everyone hates you because yours are aimed too high and blinding other drivers. Literally burning peoples eyes when u put on the high beams lmao

@mightymikee

6 ай бұрын

Internet reveals misinformed people volunteering to make fool out of themselves. This video is one. You need to reaim your headlights dude.

@christianherrera4729

6 ай бұрын

Yep. I hate these blind people who need to lights brighter than the sun to drive at night.

Have you come a pattern L shape coming out reflecting on the plastic of headlight. Causes a rectangle shape of light. Over the cut off. Tried different leds same on projectors 😊

@HeadlightRevolution

7 ай бұрын

This is usually caused by road sign reflectors, a small light that would be used above the cut off to light up road-signs so you can read them easily.

Yep

Impressão minha ou ele fala "essis djiachu" kkkkkk

Is there an agreed upon height to set them too at 20ft bc i just set mine to below the mirror on my dads f150

@dufonrafal

Ай бұрын

It should be specified by the manufacturer, usually on the headlight, but here is some reading material : www.bar.ca.gov/pdf/lamp-handbook-9.3.15.pdf www.fhwa.dot.gov/publications/research/safety/humanfac/04148/aiming.cfm unece.org/DAM/trans/doc/2012/wp29gre/GRE-68-20r1e.pdf

All my headlights these days 😢

Yeah this is a common issues where they are just not tilted enough and it's blinding. I'm left always blinded and thinking their highs are and and that it's just some idiot that can't see so they blind everybody else in city even though we have street lights and and all.