So many useful key fusion features covered that can be applied to many compositing requirements.

I liked the oval boundary line. Thanks for the information. I have a lot to learn.

Great video man!

I followed to the tee but when im in the publish to tracker, i only get 1 tracker \ center. Any idea why?

Spectacular, this will be very useful for real estate images, just what we were waiting for, thanks for your content!!! 👍

@VideoEditorStudio

Жыл бұрын

Glad it was helpful!

@maurogutierrez

Жыл бұрын

@@VideoEditorStudio Great if at some point you could show us something like in this video from 00:28 s kzread.info/dash/bejne/h4yBqK1xYZOnldo.html Or kzread.info/dash/bejne/nodpx8uQXbDSfbg.html

This is great - thanks for the tracking info!

@VideoEditorStudio

Жыл бұрын

Glad it was helpful!

OMG! LEGEND. Saved me so much time. Thank you.

@VideoEditorStudio

Жыл бұрын

Glad it helped!

Phenomenal! Great detail.

@VideoEditorStudio

Жыл бұрын

Thank you! Cheers!

this was great

awesome

This was very well explained

@VideoEditorStudio

Жыл бұрын

Thank you!

Very useful. Thanks. First time I came across the "instance" funcionality. If you're looking for a video idea: Fusion expressions - Overview of the most used expressions and variables

@VideoEditorStudio

Жыл бұрын

Thanks for sharing! I'll see if I can make something like this!

Amazing video dude! Thank you for the effort. This is for my first paid video gig haha

@VideoEditorStudio

Жыл бұрын

Good luck with your gig!

excellent... as usual :)

@VideoEditorStudio

Жыл бұрын

Thank you!

Thnk You ..for this very imp information

@VideoEditorStudio

Жыл бұрын

Most welcome!

Brand new to resolve and I am going through your videos. I was able to get up to the point of "publish to tracker" but nothing happens, do I need the paid version of resolve to use this feature? Assuming I get that figured out how do I do the lines for only part of a clip? I have a video of a large country property that I'd like to boundaries to fade in around the 5 or 6 second marks and then fade out 5 seconds or so later, say around the 12 second mark. How do I set where I want the mask animation to begin and where to end? Being new to resolve I click on things and am having very unexpected results and undo doesn't always bail me out. I'll keep poking at it but in the hopes you are still responding to questions I thought I'd ask. 1 suggestion when you use shortcuts that is great but going the menu route for us newbies to understand where to find those options should we forget the shortcuts would be a great thing to show as well.

thank for the video but i have a problem already rendered but few secomd before change the colors i dont know what Happen , Have you some idea :

Helpful but does this work when the drone is making an arc and the land shape is changing relative to the original polyline stroke shpe?

What software are you using for this? Thanks!

bro. yahoo!like it-top footage! see you on my side~ ))

Hello At the Clip 6:20 I cant remove the white that fills the whole fram

I've tried to do the tracking, but i always end up with a lot of distortion of the selected polyline whenever it reaches the border of the video (when it goes out of the frame) also, i dont know why, i get two fill slots on the modifiers menu. any suggestions what could be wrong?

Good afternoon. Lately I've been following your tutorials on Davinci, I do it at an amateur level and not as a professional. In addition to cameras, I have a drone, and I have become increasingly interested in retouching photographs and videos. As I am a beginner in this program and I am in the learning stage, I have not yet started using it, for now I am collecting information on how things are done. Regarding the method you use to mark the limits of this property in the tutorial, I would like to know what you think of the following method carried out in Fusion: *Make a Planartracker to the surface. *Generate a Planartransform. *Create a white Background, for example, on this previous one. *Now on the Background a Bspline is created to create an area, and in its menu the "Solid" option is deactivated, leaving only the edges of the area. In this menu, the movement or shape of the edge is also corrected in the "Position" and "Length" options. And then a couple more corrections can be made. What do you think about this ? All the best and thanks for your tutorials.

looks very cool but creating it is a lot and yet you explain it makes it seem super easy hahaha, nice work how about a quick video on how to flipping a video around so that the end is the beginning.

@VideoEditorStudio

Жыл бұрын

Thanks, I'll see if I can make a video about the retiming function

Publish to tracker button only tracks one point of selection, is there any solution? Thanks!

@HotmelloLK

4 күн бұрын

having the same issue

Hi Mate, What app are you using here please? Thankyou!

Do I have to have the paid studio version to do this ? Tried these steps and doesn’t seem to work on free version

I got all the way to selecting all and clicked publish to tracker and the tracker node does not appear , is this because it’s the free version ?

Can use planar tracker?

That is an amazing video, most of those style of videos also have number references indicating the size of the property, how can you put numbers and texts on the photo?

@VideoEditorStudio

Жыл бұрын

You can simply use any pre-build title available in davinci and combine them with this effect

Excellent tutorial! Quick question: Whenever I move the Write On button down to zero, the opacity fills the screen and causes there to be a blinking effect right before the opacity inside the boundary lines blink. I'm not seeing how this happened and I've followed the video very carefully.

@VideoEditorStudio

Жыл бұрын

Sorry not sure what to advise without the project in front of me

Great video. Is Studio version of DaVinci resolved required for this?

@VideoEditorStudio

Жыл бұрын

No it can be done in the free version!

Could you please upload the un-touched video as well so we can practice along? Thanks.

How do I get the point to not move even if the point it was pinned on is out of the picture?

This is very similar to the method I use, but it does not address how to handle lot lines that track onto or off the screen. Due to laws regarding VLOS and altitude, large properties must be shot by rotating and/or flying around a perimeter. Unfortunately, the background node tracks with the video (I use planar trackers), and I cannot figure out a way around the issue so that I can create lot lines that come onto and off the screen without getting chopped off due to the background tracking with the video. It would be nice to have a workaround other than having to put a background node in. Any advice or a new video would be great. Too bad I can't post screen shots in comments.

@dontperezourbuttons

Жыл бұрын

If i understand you, theres a part in this vid that shows you how to get around that if you're using planar trackers. kzread.info/dash/bejne/mmpm2o-kg663oLg.html

@coleauction3582

Жыл бұрын

@@dontperezourbuttons Thank you very much! Yes, you do understand perfectly! I had not seen this video. But, I had previously tried expanding the size of the transform which he talks about in this video, which works most of the way, but eventually flakes out due to a limitation of the transform. The max size of a transform is 32767, which is still too small for my project since the tracking goes off screen for a considerable distance. However, what I have not tried that is mentioned in this video is a Bspline node. I've only tried the polygon node. This might actually solve my problem. Thank you so much!

what if one edge of the plot is out of frame?

I select points and do the step "publish to track" and nothing happens.How should I fix it?

@skutecnetom

2 ай бұрын

same problem

My mask path does not show the 4 dots to adjust. ver. 18.5. I am stuck at this point. I've tried this on 2 computers now both fail and lock up the program. Tracking 4 pts seems to crash it.

@pepidge3371

8 ай бұрын

me too do you find a solution?

I know this maybe a dumb question, I'm new here, but what software program are you using? This is all using DaVinci resolve assets (free) program? And are any plug-ins needed?

@VideoEditorStudio

Жыл бұрын

Everything in this video can be done in the free version of Davinci Resolve, no need for any additional plug-ins

this doesnt work for me in davinci resolve 19 i try to track points but it just comes up with intelli tracker and doesnt work for all 4 points any advice?

@SeanScarmack-pq1bw

Ай бұрын

Same thing happening to me. Driving me crazy!

@user-ii2fw7el9v

28 күн бұрын

Only 1 tracker shows up in mine.

Can this be done with a dash line instead of a solid line? I've been trying to make a dash line from many methods but none ever work (use text with - letter , use solid line with masking and such). Those work as long as you dont put a tracker on them. If you do the tracker everything will just fall apart (the text version just keep spacing the - itself more and more when i animate and track them, and the masking method just refuse to move the mask along the tracked line.)

@VideoEditorStudio

Жыл бұрын

I don't know, I would have to play around and see what I can come up with. I'll make a video if I figure out something useful!

@SodaPancake

Жыл бұрын

@@VideoEditorStudio Thank you. : )

For some reason, when I select the fill and outline and publish to tracker, nothing happens

@GoodyMorillas

Жыл бұрын

Did you figure it out? I have the same problem

@pepidge3371

8 ай бұрын

me too

@aaronmunoz6007

7 ай бұрын

Hey man. Did you figure it out? It’s not working for me too 😢

@aaronmunoz6007

7 ай бұрын

@@GoodyMorillasdid you figure it out bro? Help pls

Are you able to add text or words inside the outlined area?

@VideoEditorStudio

Жыл бұрын

Yes, just bring a text node to your composition

Why wont it render the tracking when i click the track forward button???

@coleauction3582

Жыл бұрын

In my experience, it is usually because the tracking points cannot find enough contrast in one of the selected tracking points (point tracker) or inside the polygon selection (plane tracker). The best thing to try is increasing the size of your trackers if possible.

it did not work for me :(

this might need an update since 19 came out with intellitrack this way doesn't seem to work anymore

@SeanScarmack-pq1bw

Ай бұрын

Yep! Same thing happening to me.

I'm doing something similar to this for a client, but the area outlined moves out of frame - which seems to great an issue with tracking. How do I work around this?

@VideoEditorStudio

7 ай бұрын

In a case like this it's a bit more tedious but I would keyframe it manually

@SUBAQUATICANQN

18 сағат бұрын

@@VideoEditorStudio Hi thanks for the tutoral! Excelent. How do edit manually when the tracking it is no so good ?

What app is this? Is there anything close on capcut?

@VideoEditorStudio

Жыл бұрын

Davinci Resolve, probably not

i'd like to see something for A orbiting shot.

@VideoEditorStudio

Жыл бұрын

I'll see what I can do!

@pixelprovideo3586

Жыл бұрын

@@VideoEditorStudio I can give you a clip I shot yesterday if you'd like to work on it. Along with property lines.

When we clicked to change the color, nothing happens (ugh)

@VideoEditorStudio

Жыл бұрын

Color of the fill, dot or outline?

@carloshacesphoto

Жыл бұрын

same here cant change the fill color

Good, but you go to fast!!!!

This looks extremely complicated lol

@VideoEditorStudio

Жыл бұрын

It's more simple than it looks really, give it a try!