Excellent exhibition of your tech and only 4 hours print time!

Sin lugar a dudas, en 1 año voy a contratarlos!

@vocalsvideos458

2 жыл бұрын

Faltan menos de dos meses

Great presentation!

Very nice exhibit project and presentation! Good to see your utility demonstrations. Though guessing that the mix is expensive and not much faster-building than a modified mortar from your local Home Depot.

@bemore3d

3 жыл бұрын

Thank you for your comments, we are glad you like our technology. Inform you that the cost of our 3D FORMULA is on the order of 110 euros/tn. Any other information you wish you can send it to us through info@bemore3d.com

@nobreighner

3 жыл бұрын

@@bemore3d Thank you! That really is a very good price for bagged material. Just shipping a pallet could be several times that amount. And just onsite mixing - labor and equipment amortized - contributes to a greater cost than that. I hope that your pioneering pays off!

@bemore3d

3 жыл бұрын

@@nobreighner The material is produced in any cement factory in the country of destination of the machine, it is not necessary to send from Spain.

@nobreighner

3 жыл бұрын

@@bemore3d Very good!

Super 3d house sir.

Cemex, México

No se les complica en el revenimiento del concreto?

@bemore3d

3 жыл бұрын

Cuando aún está fresco, es muy fácil alisar la superficie con una paleta o llana.

Cuanto tarde el concreto en secarse, y de cuánto es el máximo de plantas y m2 que habéis podido alcanzar en la construcción de una vivienda?

@bemore3d

2 жыл бұрын

Hola, podemos responder todas tus dudas en info@bemore3d.com

Cuántos toneladas de concreto o m3 se llevó está impresion?

@bemore3d

3 жыл бұрын

Hola buenas, aproximadamente 9 tn

@eloerrotabehere6885

2 жыл бұрын

@@bemore3d entran las 9 toneladas en el mezclador de color naranja? o se tiene que ir agregando de a poco?

@vicentetal7642

2 жыл бұрын

@@eloerrotabehere6885 se va agregando poco a poco.

You still have to put the cement bag by hand.And finishing wall roof is the part that's take much time.I am cnc worker not sure it is the faster way to build a modern house. May be it will be interesting for project on Moon or Mars.

@bemore3d

2 ай бұрын

Hello, good morning, Thank you very much for your comment, we are always working to improve. We are always working to improve. As of today, we already supply the material through an automatic silo and we can build a 70 m2 house in only 8 hours. On the ground :)

@grangerthomas1571

2 ай бұрын

With rooth and finishes ceramic etc ? You can only make structure in 8 hours. How many hours to install Cnc and disassemble structure ? It is interesting for working on Moon or Mars .what about Cnc worker?

@bemore3d

2 ай бұрын

Thanks to our system, we were able to assemble the machine in only 6 hours.

Hola, ¿ya tienen el precio de la Impresora 3D?

@bemore3d

2 жыл бұрын

Si claro!, puedes solicitar presupuesto en info@bemore3d.com

How do you repair a damaged pipe or wall in a structure like this?

@bemore3d

Жыл бұрын

Hello good, thank you for your comment, I comment that the way to repair is by chopping the coating and replacement, the proper water pipe is multilayer which has a very high durability. You can also place the installations outside the wall and then put a drywall as a final finish.

Sin uso de varillas o soportes?,no me convence yo que vivo en un país donde hay peligro de huracanes

@bemore3d

2 жыл бұрын

Hola buenos dias, como se ve en el video, se colocan armaduras dentro del muro para mejorar la resistencia, además para zonas sismica y de huracanes, tenemos otro sistema constructivo con columnas y vigas 3D para el refuerzo estrutural. Para más información, info@bemore3d.com

Y como le hacen para el techo?

@bemore3d

2 жыл бұрын

Hola buenas, se puede instalar cualquier tipo de sistema de techo, se dejan previstos unos anclajes en la parte superior del muro 3D. Para más dudas info@bemore3d.com

Hola, disculpen ¿Tendrán con correo con el que me pueda comunicar con ustedes?

@bemore3d

3 жыл бұрын

Hola buenas, un placer. Le deajmos un correo dónde nos puede contactar, info@bemore3d.com

Cool

Non pressure treated lumber adjacent to concrete? No bueno. Rebar should be vertical tying in header and at all corners. This has a lot to advance in hurricane and earthquake areas.

@bemore3d

2 жыл бұрын

Hello, thank you very much for your comment, for door and window lintels no longer than 80 centimeters long, it is not necessary to shore underneath, because the upper horizontal reinforcement begins to have resistance after 12 hours, for larger openings we place a central prop. As for the vertical reinforcement, if it is not a seismic zone, it is not necessary, since the whole set of 3D walls work in compression. For any other clarification or doubt you can write to us at info@bemore3d.com Translated with www.DeepL.com/Translator (free version)

whats is filament in this video ?

@bemore3d

Жыл бұрын

Hi, is concrete

Hi, my brother and I had the idea to improve this 3D printing process using computer vision. As you can see in the video, the extrusion is very uneven, containing bubbles and holes at different sizes. Our idea is to film the material output and adjust extrusion parameters in real time. I would greatly appreciate any feedback on this idea.

@bemore3d

2 жыл бұрын

Hello, thank you for your comment. It is a very interesting idea, if you like we can talk through our mail, info@bemore3d.com

@Lu-zq4fd

Жыл бұрын

ICON already does this...

Untuk rumah RSS. Type 21 lebih gampang kali?

@bemore3d

2 ай бұрын

Halo, selamat pagi, Saya tidak mengerti apa itu tipe 21