RE Hunter 350 installed with Handlebar Risers | Full installation and review
Автокөліктер мен көлік құралдары
Time Stamps
00:00 Introduction
01:13 Product Details
04:42 Installation
08:00 Final look after installation
08:42 Ride Experience
12:39 Final Verdict
-------------------------------------------------------------
In this video I've shown in details how to install handlebar risers to the stock handlebar of RE Hunter 350. After installation of the risers the comfort levels of the handlebar has definitely gone up that makes the motorcycle great for long touring. The riser are from M Technics brand and I got these from amazon. Product link in is given below if you want to get yourself one.
Hope the video will help you and if it does then do like, share and comment.
Also, if you're new to the channel subscribe and press the bell icon for future updates.
ThankYou
------------------------------------------------------------
Link to products:
1. Insta360 One RS 4K Edition : amzn.to/3rHys8Y
2. Insta360 One RS Twin Edition : amzn.to/46XHcbc
3. Insta360 One RS MIC Adapter : amzn.to/3OlNsCD
4. Sandisk SD Card for Insta360 : amzn.to/44NSDR5
5. Invisible selfie stick and bullet time handle: amzn.to/44P7vhX
6. Royal Enfiled Custom Seat for Hunter 350: amzn.to/44ybQGC
7. Royal Enfiled Bench Seat for Hunter 350: amzn.to/3Q2j1Cw
8. RE Hunter 350 Handlebar risers: amzn.to/3Ok3H2O
----------------------------------------------------------------
Link to other products that I use
1. Sony ECM-LV1 Stereo Lavalier mic : amzn.to/44xNOeP
2. Xtreme acoustics cheap wireless mic : amzn.to/3pZ4c9a
3. Boya BY-B05 Fur windscreen for lav mic: amzn.to/44Th935
4. Insta360 One RS twin edition action camera: amzn.to/46XHcbc
5. Samsung S0 FE 5G : amzn.to/44uIrgp
6. GoPro 11 Action Camera: amzn.to/3rBNZaD
7: DJI Osmo Action 3 Camera: amzn.to/3O2fCkI
Visit my automotive blogging website and follow on Instagram, Facebook, and Twitter
Website: mototalesne.com
Facebook: / mototalesne
Instagram: / mototalesne
-------------------------------------------------------------------------------
Follow my personal social media handles
Twitter: / intazhere
Instagram: / intazhere
Facebook: / intaz.saikia.370
Disclaimer: Some of the links mentioned above are affiliate links and if you buy something using those links then a small amount of your buy goes to this channel that helps me grow it. Don't worry you will never be charged anything extra and these are the products I use personally so you can trust them.
-------------------------------------------------------
Background Music
Song: VDGL - Skycrappers
Music provided by Vlog No Copyright Music.
Video Link: • VDGL - Skycrappers (Vl...
Пікірлер: 75
This video is all about the upgrade that I did to my Hunter 350 and its related to the handlebar. And, as such I have installed handlebar risers and that has actually increased the comfort levels. If the video is helpful do like, share and comment. Also, subscribe and press the bell notification icon for future updates. Thank you🙏
Very detailed review. Hats off!! Very much useful.
@intazsaikia-mototalesne287
Жыл бұрын
Glad to know that 🙏🏻
Very informative video. Keep up the good work👍
@intazsaikia-mototalesne287
Жыл бұрын
Trying my best. Thank you 🙏
These handle riser made my riding more comfy totally luving it 🥰
@benson8934
4 ай бұрын
do u feel any difference in vibrations ?
@intazsaikia-mototalesne287
4 ай бұрын
Its a single cylinder motorcycle you feel lil bit of vibrations, no issues.
@HASAGI556
4 ай бұрын
@@intazsaikia-mototalesne287 lol naaah brrr wat the hell you saying i dont even understand. 🤣
@HASAGI556
4 ай бұрын
@@benson8934 no vibrations it's like you're riding stock bike made the ride more comfy.
those riseres sure looks good..
@intazsaikia-mototalesne287
Жыл бұрын
Thankyou 🙏 In a tight budget so only 1-inch risers.
Nice video 💯
@intazsaikia-mototalesne287
10 ай бұрын
Thankyou 🙏🏻
where could i buy machine protector ?
How reliable are those risers bro? Will it serve long-term? Also I see it's just 1inch risers, so after installation does it make our posture upright position which we have for clssic350. Please let me know..
@intazsaikia-mototalesne287
10 ай бұрын
Yes, the riding position becomes more upright. And these are good quality CNC Aluminium risers
Been 3 months. Would you prefer the risers or considering to change it to Meteor 359 handle bar?
@intazsaikia-mototalesne287
9 ай бұрын
Get risers, that's much budget friendly and you won't need to change the cables. Also Meteor Handlebar doesn't goes with the overall look of the Hunter, also you might need to change the clutch and throttle cable.
I saw three types of riser as of now. These ones, and inclined ones and also straight risers but to install them we have to remove the handle from it's company fitted bolts. I feel that may ruin the handlebar balance and angle.
@intazsaikia-mototalesne287
10 ай бұрын
That's your perception, I'm using risers and the bolts that came with it and everything working much better even when compared to company stock setup.
I have installed carbon racing handle bar riser and throttle wire seem tight when locking to right side
@intazsaikia-mototalesne287
15 күн бұрын
@@techschoolcool That one is a bit longer, so
Is it comfortable? Any handling issues ??? Nice video
@intazsaikia-mototalesne287
Жыл бұрын
Comfortable compared to before and much better handling
@kushwanth7
Жыл бұрын
@@intazsaikia-mototalesne287 thanks for reply man
@intazsaikia-mototalesne287
Жыл бұрын
I'm there to share my honest views
I read a review in Amazon says it has no powder coating on it. Will this be an issue? If Yes, would you suggest a better alternative?
@intazsaikia-mototalesne287
10 ай бұрын
Its made of aluminium, so no issues
Please change the suspension to classic reborn otherwise touring will ne a dream
@intazsaikia-mototalesne287
16 күн бұрын
Yes, thinking about that.
Clutch wire mai koe dikkat to nhi aa rhi . I mean wire got stretch
@intazsaikia-mototalesne287
Жыл бұрын
No issues with clutch cable
Installation charge 300 rupees 😮😮🤯🤯. I did it myself last month 😅😅. Life is a DIY project 😉
Can this be used for meteor 350?
@intazsaikia-mototalesne287
7 ай бұрын
Yes it can be used
Bro, today i installed these risers . Whenever i go in pothole , the kichak kichak sound is coming... Is it common bro??
@intazsaikia-mototalesne287
Жыл бұрын
No, I don't have any sound. Check with the mechanic who installed. There must be some lose bolt.
@kushwanth7
Жыл бұрын
@@intazsaikia-mototalesne287 ok bro
Where is the custom seat bro. Was it Good or not please reply. I want to install
@intazsaikia-mototalesne287
Жыл бұрын
Its much better than stock seat, I love hard seat compared to soft seats, so I got it. First take a test ride with the custom seat, then go for it if it suits your riding style.
@intazsaikia-mototalesne287
Жыл бұрын
I installed custom seat after installing the risers
Now what is your experience after install it's vibrate handle and mirror?????
@intazsaikia-mototalesne287
2 ай бұрын
The vibrations are bit less when compared to stock setup but the height of the handlebar is raised so more comfortable for long rides
Your action camera and mic ??
@intazsaikia-mototalesne287
10 ай бұрын
Insta360 one RS, Sony mic
After handlebar Riser Vibration feel???
@intazsaikia-mototalesne287
6 ай бұрын
Already the J-Series engine is smooth and after installing risers its much more less
The efforts put in to install the risers… I would rather go for carbon racing or Moto torque. Imagine if you have to remove it and do the process again!! Lots of time gone!!
@intazsaikia-mototalesne287
14 күн бұрын
@@diku6 👌🏻
is it 1 inch or 1.5 inch?
@intazsaikia-mototalesne287
11 ай бұрын
1-inch Risers
Bro did you feel any vibration on above 80km speed?
@intazsaikia-mototalesne287
3 ай бұрын
Yes, lil bit, very normal.
@deepjyotimitra1340
3 ай бұрын
@@intazsaikia-mototalesne287 in stock handle do we feel the same?
Hey bro can you give me the link to purchase the crash guar similar to your video
@intazsaikia-mototalesne287
7 ай бұрын
mototorque.in/products/astra-crash-guard
@lalliana1766
7 ай бұрын
@@intazsaikia-mototalesne287thsnk you
Is there any chance of breaking the bar or any risk ?
@intazsaikia-mototalesne287
4 ай бұрын
No
@deepjyotimitra1340
4 ай бұрын
Thank you. One more question i have regarding the custom seat. How comfortable the custom seat is for both rider and pillion for long ride and also in city ride within 30km?
@intazsaikia-mototalesne287
4 ай бұрын
@@deepjyotimitra1340 Much better than Stock seat tbh.
mobile holder link?
@intazsaikia-mototalesne287
Жыл бұрын
Actually testing one, but here is a link you can check amzn.to/44vw9EB
What's your height?
@intazsaikia-mototalesne287
9 ай бұрын
5'4" 🌚
Bro what's ur height?
@intazsaikia-mototalesne287
14 күн бұрын
@@mokshith7211 Not much tall, 5'4"
@mokshith7211
14 күн бұрын
@@intazsaikia-mototalesne287 same bro even am 5'4, how's ur riding posture now, bit comfortable???
@intazsaikia-mototalesne287
14 күн бұрын
@@mokshith7211 Its comfortable yet the sporty bit is still there due to these risers
bro dont take it personally, either you speak perfect english or you use hindi in your channel, sometimes it is difficult to comprehend your english speaking. if you use hindi i think you will have more viewers like others.
@intazsaikia-mototalesne287
3 ай бұрын
Don't mind you can unsubscribe and and start your own channel where you can speack perfect English. I don't want useless people like you watching my video ☠️
Bhai hindi mein bolo
@intazsaikia-mototalesne287
9 ай бұрын
After uploading the video 🙃