RC-Tips'n Tricks [#03] Tamiya TT-01 - More Ground Clearance / Rally
Автокөліктер мен көлік құралдары
Tips and Tricks for the Tamiya TT-01. In this video, we increase the ground clearance by using more spring travel and turn the TT-01 into a Rally-Car.
If you have any questions, feel free to contact me!
Пікірлер: 13
What size are those screws and spacers?
Wow. I like the simple mods you did to it. Now I want to do the same to my Subaru VX :) what type of longer dampers did you put on it?
@captain_obi
3 жыл бұрын
Thanks! In this video i used 65mm oil filled aluminium shocks from "Reely".
How much clearance can you get?
Hello, how long The new screws? Regards
Where did you get the tires
Can this be the same thing for the TT-02 as well too? I have a TT-02 and I always wanted a 1/10 Tamiya rally car in my collection.
@captain_obi
3 жыл бұрын
Sorry i can't tell you, I don't own a TT-02. But you can try to remove the base plate and the shocks. Then you see if the suspension can even travel any further.
@newandroidfan
3 жыл бұрын
For TT-02 I believe just using the longer bottom ends of the cva shocks will help you get more ground clearance and you wouldn't need to cut the front and rear skid plates to make room for the lower arms to travel further down.
Do 69mm dampers fit in? Or have i go one step downwards to 65mm dampers?
@captain_obi
3 жыл бұрын
I would recommend 65mm. With 69mm the suspension could touch the frame, because the tire slides further into the middle.
@cpcs1
3 жыл бұрын
Is that 65mm hole to hole please?
Cornish flag did I see there !?