RC Receiver: I'll walk you through installing a Flysky receiver on a Betaflight Flight Controller.
Ғылым және технология
I'll show you how to not only install the Flysky RC Receiver onto a Betaflight flight controller, but I'll also show you how to wire up a custom JST plug, as well as show you where to solder your wires to. I show you everything here to properly connect and use your RC receiver!
=DarwinFPV=
Darwin FPV Darwin79 Unboxing: • I Unbox one of the CHE...
DarwinFPV's Darwin79: s.click.aliexpress.com/e/_9jtvbN
DarwinFPV: www.darwinfpv.com/ (Currently under construction (Feb 2021)
=MORE VIDEOS YOU MAY LIKE=
Setting Your RC Rates: • FPV Rates Explained: W...
Fixing Your Broken LIPO Connectors: • SAVE YOUR LIPO! Fix Yo...
=FLYSKY FS-i6 Transmitters=
Everything You Need to Know about the Flysky FS-i6 Transmitter: • DO NOT buy a FLYSKY Tr...
Setting your Flysky Aux channels and Betaflight Modes: • Betaflight Flight Mode...
Using your Flysky Transmitter on your PC: • Use Your RC Transmitte...
=WHERE TO BUY FLYSKY=
Flysky FS-I6:
s.click.aliexpress.com/e/_dWy...
www.banggood.com/custlink/DKv...
Flysky FS-I6X:
s.click.aliexpress.com/e/_dWK...
www.banggood.com/custlink/KvK...
Flysky FS-I6S:
s.click.aliexpress.com/e/_Bf6...
www.banggood.com/custlink/Dm3...
Flysky Receivers (FS-IA6B , FS-X6B, FS-A8S):
s.click.aliexpress.com/e/_dYg...
FlySky X6B
www.banggood.com/custlink/Gmv...
Fli14+
s.click.aliexpress.com/e/_dY2...
www.banggood.com/custlink/D33...
URUAV 14UX:
www.banggood.com/custlink/3Dv...
STM32F411CEU6 512K Flash Development Board:
s.click.aliexpress.com/e/_d8y...
Пікірлер: 18
Thank you for your video it really helped me
Great video so helpful
@TheWayneStevenson
3 жыл бұрын
Happy to help! Let me know if you have any questions and I'll help any way I can.
thanks for the video! you just got another sub
SO HELPFUL
@TheWayneStevenson
2 жыл бұрын
Thanks for saying so!
If you soldered your receiver directly to the FC would you still need to bridge 2 of the 3 pads for ibus/ppm or sbus like you did?
to make this bridge with center pad and ppm pad are you have ppm select in flysky transmiter?
@TheWayneStevenson
2 жыл бұрын
You can do that or you can use a separate RX pad.
Hi, if i have to connect a Crossfire nano rx... what i have to do? The reciver has 4 cable... which one do i have to choose? Thanks
@TheWayneStevenson
3 жыл бұрын
I'm not familiar with that RX. But usually you're just needing to wire to three pins (5V, GND, and Signal). Channel 1 is likely the signal for iBus / PPM. That would go to your RX UART.
Hey man, I have this same drone, BUT I can't get the little bugger to connect to my receiver. It gives me all the proper tones when I plug it in (the three and then the other 2) so it seems to have bound, But it won't arm and I can't get any receiver in Beta flight. The VTX has a solid blue and 3 red blimks/ the boot button has steady red blinks. Any ideas??? I am useing frsky and it is telling me telemetry lost when I unplug so it seems to be connected, the sbus on the F/C is bridged.
@KaizerTest
3 жыл бұрын
Did you ever figure it out? My Darwin 79 came with Sbus bridged already so I had to use a solder wick to clean it and make it ibus bridged for a Flysky receiver. Then I couldn't get any stick movement in betaflight. So in the end I soldered the bridge back to sbus and found an sbus Flysky reciever and soldered to a separate ground, 5v, and signal to rx2 pad.
@Mrgalletikas
2 жыл бұрын
Hi all, i have connectd a Flisky Fli14+ into mainboard. I haVe conected the wires with the connectors included. To actívate isbus, i have soldered the two pad of the right . Ppm and ibus. Perfect.
@KaizerTest
2 жыл бұрын
@@Mrgalletikas I have the same setup. Its an awesome quad for the price for sure.
Hola as probado que tal vuela? Acabo de comprar uno sin saber si e echo buena compra
@Mrgalletikas
2 жыл бұрын
Que tal te fue? A mi me llegó hoy.
@ivanfpv1767
2 жыл бұрын
@@Mrgalletikas hola la verdad que muy bien pero de stock me daba algunos fallos Pero ahora estoy volando con emiflight y va perfecto