love the water cooling around the motor, nice touch

DUDE!!!! This is absolutely one of the most impressive DIY engineering projects I've ever seen. Just wow

@wdonald8

4 жыл бұрын

Until you see mine,... *Quad 4 Corners Impeller Motors* *2-Clockwise Propellers* *2-Counter-Clockwise Propellers* *Mine is a Platform Pontoon Deck-Boat 2ft. long with all 4-Motors Submerged Below All 4-Corners to Keep It More Level & More Plained Out for a More Enjoyable & Safer Full-Size Ride Experience* *My design also has an Onboard L.E.D. 2ft. X 2ft. Video Screens Back-to-Back with 4-Mid-Range Water Proof Speakers & a Radio Station Receiver & Cable TV Reception, For Providing An Onboard Music Sound & Video Entertainment & Watercraft Advertising Platform* *My Video Will Be Arriving on KZread Soon This Year 2020* *Stay Tuned* ,...

Great idea using those earth magnets as door latches. If the motor wasn't so big and heavy the boat would be sitting like a life size pontoon. Absolutely awesome project!

Great job! But definitely too heavy. Especially aft heavy. Small corrections and it is perfect! :-)

Really cool build. I think you could get more buoyancy out of the pontoons if you use a plastic that will coat the walls of your mold and leave the center hollow. This may require a way to slowly rotate the mold while the polymer cures. You could also use that awesome camera mount as a base for a water cannon to squirt your kids.

@BrandonsGarage

4 жыл бұрын

Both perfect ideas, Ill try the hollow pontoons in a few weeks.

omg it's amazing bro

Yes, amazing, i was thinking tritoon the whole time.

Taking pre orders for xmas?

Awsome RC Pontoon! Hollow pontoons would help flotation.

Nice job Brandon, well thought out and definitely functional. Never saw a big V4 outboard on a pontoon boat here at the lake where I live. You're a first for that! Doug@ the "ranch"

@BrandonsGarage

4 жыл бұрын

No? Thats what they all have around here.

@lakesideranch

4 жыл бұрын

@@BrandonsGarage This lake is only 3 1/2 miles long so all the pontoon folks run maybe 50 - 60 HP just for cruising....

@Restless2010

3 жыл бұрын

I'm running a 21ft Tracker Party Barge with a Johnson V4 120.

Where did you get the outboard?

@skylar4941

3 жыл бұрын

Searching out board moters on google like rc

I think you need a bigger boat.

First of all, AWSOME brother. Second is a QuestioN; what was the blue liquid used to make the pontoon mold? I build fiberglass rc boats myself? very curious?

@BrandonsGarage

3 жыл бұрын

It was a 2 part urathane rubber with some blue colorant added in for flavor.

@IRONCLADRC

3 жыл бұрын

Thanks brother.

Gorgeous build, you had me wondering WTF at the start when you were making the molds for the pontoons. Just a thought but, how about replacing the outer pontoons with PVC pipe for some extra flotation? That way the boat _should_ ride a little bit more naturally.

Should have put a smaller motor interior and a bimini top on it

My man you're a certified mad scientist, what a cool video excellent!!

Wish I had your tools! lol

damn i was hoping that was a water cannon

That was just your average video................. until the kid showed up!!!!!! More kid, PLEASE!

It's cool but way to heavy. Make the pontoons out of the mix pour foam and seal it. Its stronger than you expect. It would float way better than it is

@BrandonsGarage

4 жыл бұрын

It is, at 4:55 I apply the wax based release agent at 5:12 I pour the mixed foam. It floats quite well, I could probably add a couple more pounds to the interior without issue. Problem I think is with the large outboard; its weight, size, and placement. Also, I believe it is too under-powered, a few more RPMs and I could probably get onto plane.

@-Viceroy-

4 жыл бұрын

Not too heavy. Maybe a diy mini hyrdofoil to the engine to plane the boat, or just extend the side pontoons a bit.

@oneeyedude20

4 жыл бұрын

@@BrandonsGarage it didnt look like foam when i watched it lol.

@oneeyedude20

4 жыл бұрын

@@BrandonsGarage the foam im used to instantly starts to rise

@BrandonsGarage

4 жыл бұрын

This was a 90 second pot life.

What is range of remote?

Wait how did you make the mold split like that. Didn't you pour it all at once 🤔🤔🤔🤔🤔

@BrandonsGarage

11 ай бұрын

Pour half, let it dry, pour the other half. Problem though, the lower mold will release air bubbles as it cures, leaving the final part a little rough. To solve this problem, you would flip it over, and re-pour the bottom half again.

Pretty cool! What model of CNC are you using the cut your plywood?

@BrandonsGarage

4 жыл бұрын

No model, built it myself last December.

What is the blue mold?

Nice job, love your vids I used your techniques when I remodeled my boat that red guard is just like pudding what type of rollers did you use I had to just spread mine due to the fact that the rollers just clogged up after the first application.

@WoodGuy

4 жыл бұрын

He used a little 4" paint roller, they come in a pack of 6 from home depot and just throw them away after each application.

OO Sweeeeeeeeeeeeeeeeeeeeeeet rig, man, sweeeeet.

make a rc suntracker 16 dlx pontoon boat black

You should repower your pontoon in real life with a motor that big it might do 150 mph

Would you be interested in selling a few of your pontoons? Very interested and very cool build.

@BrandonsGarage

4 жыл бұрын

Yeah sure, I just need to get some more foam for it.

@rickboyster8014

4 жыл бұрын

@@BrandonsGarage what's the diameter of the toons and length? What are you thinking about as for price of them?

o my god

@BrandonsGarage

3 жыл бұрын

Agreed

That’s not a pontoon it’s a tritoon