I really like it Vas, Corally are killing it. I think you've made me buy one . Great electronics install, I'll be watching this when I get one.

Excellent clear install Vas, especially the very clear install of the radio re binding, calibration & setting end points. Thats the best & easiest to follow radio install & set up that I have seen, that should help a lot of new guys to the hobby understand how to set the radio. As it can be very confusing for newbies setting up the radio just from reading the instructions that come with the radio/esc. A good clear video on this very subject is worth a thousand words over someone trying to explain with just words on how to do it. Should be getting my Kronos XTR 2022 in the next week or so once they drop in the UK.

excellent Vas! Very clear!

Needed this. Thank you. I just got a Kronos roller.

Nice and tidy setup in the XTR👌 I've been seeing this tool set make it's rounds, looks solid.

As always a great video, full of relevance for this build. Thanks Vas 👍

Awesome clean and clear install Vas. Really think that servo endpoints get glossed over far to much when people buy RC's. My T brand 1/6 MT is well known for destroying steering servos. First thing I did was set endpoints and it's still going two years later. Do it on all my RC cars. Quite surprising one side was at 55%. Imagine hammering that poor servo against the end stops over and over again. Perfect tutorial mate nice work!! Love quality tools.. God they make all the difference!!

@AussieRCPlayground

2 жыл бұрын

Thanks Steve. Yeah, kinda odd that it was 80% on one side and 55% on the other, but it just goes to show how depending on the servo you use, it doesn't always center perfectly in the middle. I did have to give it a heap of subtrim when I drove it, so I guess it explains why it was out a bit on the end points. Thanks heaps for stopping by and thanks for the comment. 🙂👍

I love that tool kit man so great to have

This was mint!!!! super easy to follow. Well Done and thank heaps bro.

Great step by step video. You make it so easy for us to follow along. Thanks for the great video

@AussieRCPlayground

2 жыл бұрын

Thanks Kevin, glad it helped. 🙂

Mad tool kit, love it. Very tidy build bud and once again great video review

Great and detailed video as always 👍

Really nice video, thank you!

Hi Vas. As you are using a digital servo you don’t need to leave your transmission mode in T-FHSS normal. You can set it to T-FHSS HI. Then you can enjoy the full response of your digital servo.

Very clear video mate... good job! 😀

@AussieRCPlayground

2 жыл бұрын

Thank you very much, friends. :)

Excellent installation video and I like your take on showing the tools. “1 to bend, 2 to send”! 😃

Hi Aussie I order a max8 for the team corally kronos 2022 has well I'm glad you're doing a video it does help people who dose understand about electric setup 😀

@paulclancy2404

2 жыл бұрын

Hes using the sencorless motor from max 8 combo i believe and the sencored 6s esc . If you bought the maxx 8 combo 2200kv make sure you gear down

@Moggmodels23

2 жыл бұрын

@Paul Clancy hi I was thinking of butting a 18t pinion gear in what you think it's better then 22t or 25t I think 🤔

@AussieRCPlayground

2 жыл бұрын

I'm using the stock 13T pinion in mine with the Max8 motor and it's more than enough. If you use an 18T pinion, you will likely run into heating issues, so I wouldn't recommend a pinion that big with this motor.

@Moggmodels23

2 жыл бұрын

@Aussie RC Playground hi thanks for message me back yes I understand that but I just want more power what about 15 or 16t that be better then 18t you think 🤔

@Moggmodels23

2 жыл бұрын

Hi Aussie I just wondering have you got the link for the servo because I could see it below the link. I was thinking of using 25kg servo on it be OK you think 🤔

Excellent video! About that screw under the ESC plate you mentioned, maybe it's on purpose they don't put it there? I'd imagine the plastic plate absorbs the shocks when it flaps up and down, but if you add a screw it makes it more rigid and there's more transfer of forces directly to the ESC?

Vas do you think their is any truth in those that say the Corally Kuron 825 motor & the 135a is faster/more powerfull than a Max 8 system ? I have always wondered if it is more to do with the internal gearing being higher on the 6s Corallys compared with the likes of a Kraton 6s, where the Corallys seem to be faster out the box & more brutal even on the 13t pinion over the Kraton that comes with 15t pinion stock.

I was thinking about going senscored. Bcuz I have a feeling that all esc and motor r going to be senscored.

The handles on the drivers remind me of Wera ones.

What do u prefer, senscored or non senscored for a ARRMA outcast v2 4s 4x4 blx??Because I'm looking to upgrade my esc and motor.

Great video Vas. Just wondering mate I've got spektrum radio gear and am I correct in remembering that you have to re-calibrate the system after setting end points ? Do you need to do that with the Futaba system?

@AussieRCPlayground

2 жыл бұрын

Calibration is only for the throttle and those end points should be at 100% when you do this. If you reduce end points on the throttle afterwards, all you're doing is reducing the top speed of the motor. This is actually ideal if you want to lend the car to someone with less experience and don't want them to go full throttle.So if you re-calibrate again after adjusting end points, you'll basically put the throttle back at 100% again. If it works ok. Hope that clears that up, but feel free to ask anything else. :)

Great Install video Vas. How is the XR8 Plus? I have the SCT version (4s) but I have wanted to pick up the XR8 Plus with the 2250kv sensored motor for a while.

@AussieRCPlayground

2 жыл бұрын

Thanks Jason. The XR8 is now quite old and has been flawless during that time. I also have the XR8 2250kv combo and that has also been great (it lives in my Losi 8ight-T). I think the Max8 combo has more power, but the XR8 combo is smoother. Either way, I think you'll love it. 🙂

@JasonPerrinRCVlogs

2 жыл бұрын

@@AussieRCPlayground I really like the max8 combo. So I feel this would be the same but sensored. Thanks for the reply.

Hello, where do you buy your Amass XT150 Connectors from? Hobby King has been out for a while...or I have terrible timing and they sell out before I get to them lol

@AussieRCPlayground

2 жыл бұрын

Try AliExpress. I've found some there that work out cheaper if you buy a bulk lot. 😉

@mesfume

2 жыл бұрын

@@AussieRCPlayground thanks for the info, I really appreciate it that you answered so promptly.

Vas when u gonna get back in front of the camera love ur older video ur setup was perfect awesome vids though just miss seeing u

I use that same motor on my DHK Maximus I would of went a bit bigger for this RC

@AussieRCPlayground

2 жыл бұрын

I used the Max8 Combo in the 2021 XTR and it was more than enough. Sure, you can go with a bigger motor, but there's no need.

HI buddy nice details on the electronics installation well done for those people whom have trouble should watch this video As always buddy your video's are fantastic cheers 👍👏👌

@AussieRCPlayground

2 жыл бұрын

Thank you very much. Glad you enjoyed it.

You use a 15 t pinion?

@paulclancy2404

2 жыл бұрын

Thats what I do too move the spur on the pinion , when you realize the motor mounts cheap atlest the arrmas

@AussieRCPlayground

2 жыл бұрын

I used the stock pinion, which I believe is 13T pinion.

Vas, may i ask you the obvious: Kraton exb or Kronos xtr?in terms of durability like differentials and arms/plastics.

@AussieRCPlayground

2 жыл бұрын

A lot will depend on who you ask, but I think they are both about the same. I've had about as many broken parts with one brand as I have with the other.

@RACEABLE

2 жыл бұрын

@@AussieRCPlayground political answer 😉.. thanks anyways..(i will stay with my serpent cobra truggy for the time being)