Very innovative! Thanks!

in this RC lawn mower project, I laud and admire your awesome creativity and fantastic persistence in fabricating and testing models 1 to 6, in rubber wheels, tracked wheels, and iron wheels (I coined it model 7). I, as an admirer and outsider, humbly propose few points for your considerations, please: -a. Increase the diameter to each of the 4 wheels, similar to that of the iron wheels (the latest model 7). But, the bigger wheels shall have rubber tires to better supporting the mower, improve transmitting traction and afford absorbing terrain's shocks. -b. Continue with your 4-wheel-drive vis-a-vis the spider-like independent swinging wheels design in order to maneuver in difficult terrains such as steep slops and undulating surfaces such as drains and holes. Of course, it is challenging. However, if achieved, it will be the a remarkable technical breakthrough in RC lawn mower making. Personally, I feel that common rubber wheels shall be superior over tracked wheels for simplicity and cheaper price. - c. Upgrade the power of your fuel engine for 3 reasons: i. Heighten the cutting power ii. Better charging your batteries through electric generator. iii. Add weight to the mower for stability in cutting. - d. Ensure that the each of the 4 DC motors driving the wheels shall have at least 24v for sufficient torque to maneuver in difficult terrain such as climbing out of a small drain. - e. Refine, package, commercialize and pattern this mower. Thanks

Hi Buddy, awesome work!

Remind me to add "gravity" to the list of rc mower considerations 😊

Put the kid in the back and give him the remote 😂🤘

AWESOME, Why did you design a mower that hinges in the middle? In 4X4 tank mode you already have zero turn ability.

@urbanbelaj

2 жыл бұрын

Darren I used a lot of energy while turning like a tank, and even with metal wheels the mower probably wouldn't turn, at the same time turning like a tank would do a lot of damage to the grass

@Rambleon444

2 жыл бұрын

@@urbanbelaj Thank you for the answer. I am very impressed with your creativeness and hard work!!!

What controllers are u using for your motors and what motor sizes are these ?

@urbanbelaj

Жыл бұрын

I use flysky controller and sabertooth 2x32, the motors are dc/24v/75rpm/250w

@urbanbelaj

Жыл бұрын

I use flysky controller and sabertooth 2x32, the motors are dc/24v/75rpm/250w

Very cool! I want to build one as well. Would you say that the hinged version is the best? I think tank steering could be difficult and casters at the front make it difficult to drive straight lines.

@urbanbelaj

9 ай бұрын

Yes you are right, spinning wheels have a hard time keeping a straight line, the central hinge is very useful, but not for too hilly terrain, because the center of gravity changes, tank sterring consumes a lot of energy, and the structure itself must be very strong. Everything has pluses and minuses. Now I'm testing sideways driving or dog walk and we'll see how it goes.

Le model 6 avec la direction je trouve cela pas mal . Vous tourné une petite dynamo entraîné par le moteur ?

@urbanbelaj

5 ай бұрын

Yes, alternator 50 amp.

hallo, Can you send me photos of how you connected the wheels to the motors?

@urbanbelaj

Жыл бұрын

Send me your email.

@thecompass98

Жыл бұрын

​@@urbanbelajI tried to send but it does not work. but you can find it in my channel

@urbanbelaj

Жыл бұрын

Here is my email, urban.belaj@gmail.com

@thecompass98

Жыл бұрын

I sent you an email

super narejeno:) sam tudi delam nekaj podobnega in me zanima kako si resil tezavo z motorjem? sam imam namrec pripravljen 4takten motor ki pa ugotavljam da nebo najboljsi za zelo strm hrib zaradi mazanja. 2 taktnega taksnega pa ne najdem.

@urbanbelaj

Жыл бұрын

Zdravo, tudi, sam imam isto težavo, iščem 2T motor pa ga ne najdem, oz. so zelo dragi, v poštev pride gokart motor ali paramotor.

@666ronu

Жыл бұрын

@@urbanbelaj te lahko kje kontaktiram na msg? tukaj preko negre poslat sporocila

@urbanbelaj

Жыл бұрын

@@666ronu urban.belaj@gmail.com ali telefon 041431677

where can i get the plans?

@urbanbelaj

Жыл бұрын

In my head 😀, plans does not exist.

What motor Controller are you using and how many?

@urbanbelaj

Жыл бұрын

One, sabertooth 2x32

@nikolaialphonso431

Жыл бұрын

@@urbanbelaj ok thanks

@nikolaialphonso431

Жыл бұрын

Have you had any issues with motors burning.? Also what’s the wattage of the motors?

@urbanbelaj

Жыл бұрын

@@nikolaialphonso431 No, no problem, the motors are 250w each.

How much Amper has the battery ?

@urbanbelaj

9 ай бұрын

2x 12v 33Ah AGM

@dacianfd8418

9 ай бұрын

How much autonomy do you have with 2 motors and the battery set?@@urbanbelaj

@urbanbelaj

9 ай бұрын

Unlimited because i have alternator.

Y si le ponemos una uzzi?

@urbanbelaj

8 ай бұрын

You can try!

SUPER COMBIEN le 6?

@noofff1768

Жыл бұрын

Vous vendez ?

Kupim,koliko Kosta?

@urbanbelaj

Жыл бұрын

3000€

vidim da ste prvak v sloveniji v prototipih zato bi vas prosil za kontakt imam namreč nekaj podobnega pa bi rabil elektro servis Frenk.Šentjur nula enaintrideset osemstoenaindvajset petstooseminosemdeset.

@urbanbelaj

2 жыл бұрын

😀 041 431 677 Urban

Ese atuendo me vuelve loco SEXTINDER.Uno loco contigo y tienes ese cuerpo curvilíneo, hiciste un buen trabajo modelándolo también. También me gusta el último atuendo. Me encantasd cómo los cinturones de liga se.