RC Garbage truck packing yard waste #3
Автокөліктер мен көлік құралдары
Crushing some more twigs, and also some aluminium. Lifting a skip and compacting the contents.
Most of my components were bought at:
www.fechtner-modellbau.de
They have a lot of good stuff!
Cab, chassis, wheels, tyres, suspension, front axle
Wedico, www.wedico.de
Alternative Cabs:
Bruder Arocs: www.bruder.de
Scale-art MAN TGS or Arocs: www.scaleart.de
Drive Unit
Motor: Servonaut GM32U450: www.servonaut.de
Cardan shafts: Fechtner modellbau.
Rear Axles: www.ruest-feinmechanik.de (Out of business?)
Hydraulics
Pump, cylinders, valves, filters, hoses, connections:
www.leimbach-modellbau.de/
I run my system at 15bar. Ø7mm cylinders for tailgate lift, all other cylinders Ø12mm. Pump article nr. H0102.
Electronics
Transmitter: Futaba FC-16 Boat 'n' Truck (Not available anymore)
2.4GHz conversion: FrSky: hobbyking.com/
Reciever: Frsky 8 channel: hobbyking.com/
Speed controller: Servonaut S22: www.servonaut.de
Winch speed controller: CTI Thor4s: www.cti-modellbau.de
Pump Switch: Futaba, but I would recommend using a single direction speed controller instead.
Winch Motor: PGM12L, Fechtner modellbau.
Bodywork
Container Floor, Sides and Roof: 3mm aluminium plate (watercut)
and various aluminium U- and L-beams. Machined and/or cut manually.
Container crossbeams: Aluminium beams 6x10mm and 6x20mm.
Ejector Plate: 1mm steel plate (laser cut), and 6x10mm aluminium crossbeams.
Tailgate Sides: 1mm steel plate (laser cut), and 5mm aluminium plates (water cut and machined).
Tailgate Crossbeams: Various sizes of aluminium beams, machined.
Packer Plate: 12, 5 and 3mm aluminium plates. (Water cut and machined)
Slide Plate: 3mm aluminium plate (watercut) and 10mm aluminium plate (watercut and machined).
For additional info; just ask.
Пікірлер: 47
One of the coolest rc I've ever seen.. Thank u for sharing with us..
Where do you get that
26 thumbs down??!??!?!??!?! 26 disgruntled folks who you refused to build one of these for.
@SeRefuseTrucks
6 жыл бұрын
Haha might very well be the case.. ;) But KZread is filled with people who give negative feedback for unknown reasons. Tragic really...
I love rc garbage truck
Cool!
Please let me know we're did you get the truck from I really want one
@SeRefuseTrucks
6 жыл бұрын
It was made by myself, but for infor about components; see the desription.
Build one I will pay!!
she is back
@SeRefuseTrucks
6 жыл бұрын
The truck doesn't have a sex. ;-)
เยี่ยมมาก
Nice.
where do you buy one of them? i’ve been looking for one
Hello i'm an rc garbage Fan how much cost this truck i want by this
Would you consider selling your garbage truck?
Where can i get the mini hydraulics you have? How much are they?
@SeRefuseTrucks
6 жыл бұрын
I have added the info in the description. The system in this truck is worth around 1200 Euro.
@user-sl8tf2yw8b
6 жыл бұрын
NorthShoreGarbo ج
Can you write a step by step on how and where to find all the parts and how to make it...My computer is having a hard time translating...would be much appreciated.
@SeRefuseTrucks
6 жыл бұрын
Thanks for the input! However, that would take way to much time. Right now I am focusing on new things, and that requires all my "hobby time". However, I will keep it in mind for future Projects. You can find most of the parts in the video description.
Can you get a vid of the ejector panel pushing or retracting from behind the cab thanks
@SeRefuseTrucks
7 жыл бұрын
Of course! Only the ejector, or something else as well?
@robinsonm08
7 жыл бұрын
SeRefuseTrucks thanks .What about a light bulb crush .Do you have other models now as well still are you on Facebook ?
@SeRefuseTrucks
7 жыл бұрын
Hi again. No new models yet. Crushing lightbulbs is a messy business, but I'll se what I can do. ;-)
Please can I buy it
will you crush aluminum foil cars?
@SeRefuseTrucks
6 жыл бұрын
Maybe. :)
Hi, what scale is this, it being wedico scale I assume 1/14. Makes me wonder if 1/14 is more common then 1/13 which I build in. Thanks for the awesome video.
@SeRefuseTrucks
6 жыл бұрын
It is roughly 1/14.5 , so yes, Wedico and Scale-Art sized. I don't really know which scale is more common, but my guess would be the 1/13 from Tamiya. That small difference in scale is quite irritating though.
@Sam16034
6 жыл бұрын
Yes the gap is irritating. I've thought about going to 1:12 so 1 inch equals 1 foot but it makes a differance in size, and I'm not willing to redo my fleet
@SeRefuseTrucks
6 жыл бұрын
So, you have already built at least one truck? Going to publish anything here on youtube? :)
@Sam16034
6 жыл бұрын
Yes. A First a Labrie Expert 2000 comingle 60/40 which sadly broke and no longer exists. It got replaced by a Heil Rapid Rail, and then I built a Mcnelius Pacific Series with a Peterbuilt 320. The gal is to make both RC in the long run but for now I'm working on Headlight, Tail lights, and flashing warning lights. I don't know if I will post any thing or not. We will have to see. Oh and I do build with cardboard and Fish tank aerators with syringe hydraulics. Maybe better material in the future. :) Also have dumpsters, a skip, totes and Curroto Can
Imagine someone made a side loader like this
@SeRefuseTrucks
3 жыл бұрын
One day I might... We'll see. =)
@piggyjain8720
3 жыл бұрын
@@SeRefuseTrucks :)
@piggyjain8720
3 жыл бұрын
@@SeRefuseTrucks if you do make a dadee scorpion asl it would look so sick
@SeRefuseTrucks
3 жыл бұрын
@@piggyjain8720 Me building a Scorpion ASL is highly unlikely. I prefer pendulum packers in ASL-trucks, so, If I was to build one, it would be the Wittke Crocodile.
What is the name of the truck
@SeRefuseTrucks
7 жыл бұрын
It is a Volvo F12 with a Norba RL35 body. The cab is made by Wedico.
@gasperleon_official9567
7 жыл бұрын
SeRefuseTrucks Is there a construction plan for the model?
What is that container?
@SeRefuseTrucks
5 жыл бұрын
What the container is made of, or what is inside it?
@Raether608
5 жыл бұрын
@@SeRefuseTrucks both
@SeRefuseTrucks
5 жыл бұрын
@@Raether608 The container is made from 1mm steel plates, 4mm aluminium plates, and then screwed/welded together.
I Need a Konstruktion Plan
ตวยๆๆๆๆ