Razor PowerCore E90 Control Module Change by SEPL
Doctor Razor shows you how to quickly and easily change a control module on your Razor Power Core E90 Electric Scooter.
For help or to order spare parts, please email us at razor@sepl.eu
www.shoprazor.eu
Audio Credit: Adventures by A Himitsu ( • Razor PowerCore E90 Ba... )
Пікірлер: 38
I have a question will the young lady come over and fix my scooter
How do you know if the module is bad?
Thank you info
how did you made stem longer?
How can I do?
Hi, I have had intermittent power supply and I was asked to change the control module. However, I am unable to remove the connectors from the ON/OFF switch. Could you please help
@vernonbosshard9317
3 жыл бұрын
Pry with a flat screwdriver, they are a bit sticky. They have a small locking tank in the middle.
What are the symptoms of the module going bad?
@Myntify
3 жыл бұрын
Even slower movement… exotic noise. And a couple more.
@sw6188
Жыл бұрын
I have a scooter which won't drive the motor. Motor is good, battery is good, go button tests ok. I am trying to work out the schematic for the control module.
I had to return mines. We chraged it for 12 hours and the light at the bottom was still red not green. So something was wrong with the motor. But i reordered another.
@CoreShaft
Жыл бұрын
The light is supposed to remain red
@R.O.T.C._SEEM
9 ай бұрын
Same, it just wouldn't work and the screws are freaking superglued on so I can't even open it up. I have an electric screw driver and it stripped the screw.
Quick question i replace the control module on my scooter and still doesn’t work. Did i just got a defective controller
@sw6188
Жыл бұрын
You realize you have to spin the wheel up to 3 mph before it will go?
@that1foooSDadCuhzzo
8 ай бұрын
@@sw6188 do you really?
@sw6188
8 ай бұрын
@@that1foooSDadCuhzzo On most scooters yes. You stand on them, kick off and rotate the throttle. The motor will kick in and off you go. Not like a motorcycle where just twisting the throttle will set it in motion.
Hi my scooter has a new battery but it turns on reverse
@vernonbosshard9317
3 жыл бұрын
You have the batt wires reversed.
I have three questions. Is the push button throttle pressure sensitive or on/off? What is the capacity/voltage/current of the battery? Can the control module be upgraded?
@vernonbosshard9317
2 жыл бұрын
on/off on my E95 you might can find little bigger Amp hour batteries after market, but A/H claims and actual are sometimes different. Toy batteries are all based off of common batteries designed for things like deer feeders, alarms, etc... and sometimes, most times, cheaper. search ebay you will find them.
@sw6188
Жыл бұрын
It's basic on / off. The battery is a standard 12 V 7 A/h type. Yes the control can be upgraded - look up Variable Speed Conversion Kit here: electricscooterparts.com/razor-power-core-e90-scooter-parts.html
Hi , would anyone know the number for plastic gears which go I rear wheel..there are 3nin rear wheel and their teeth broke. Iam not able to post pictures here
Very nice video, pls I need same motor and same controller like your
@patrickmcauley3123
5 жыл бұрын
How much weight can it hold ?
@that1foooSDadCuhzzo
8 ай бұрын
@@patrickmcauley3123 like 175lbs max I believe ..
Elle a pas remis la batterie dans le bon sence
Why can't they tell you which wires go the brake switch and which ones go to the push button, the connectors are the same. You have a 50/50 chance.
@matthewsbertoli570
2 жыл бұрын
I am in the same predicament
@vernonbosshard9317
2 жыл бұрын
@@matthewsbertoli570 Yellow to brake switch, orange to push button.
@morganplisken7271
2 жыл бұрын
Just mark your wires with colored tape before you unplug them, this is a good habit to get into when working on electric wiring or these days use phone photo.
I just installed a new batt and control module, scooter still won't go, tested the motor with direct power, tested the push button and brake switch with ohm meter, all good. Did I get a bad module?
@stevenbarker3569
2 жыл бұрын
same problem, new module and no go.
@vernonbosshard9317
2 жыл бұрын
@@stevenbarker3569 China made? I guess I;m gonna have to go with the Razor brand module instead.
Troubleshooting Razor E100
Very helpful and if a girl so can do it, so can an old guy.