Awesome . A co worker gave me one and am looking forward to the mods am planning for it . Your video inspires me. Btw 50 is not old at all am 58 years young. It's all in the mind. Lol.

@darrenjackson6207

6 жыл бұрын

Nikko Gutierrez Awesome bro ! I hope you make a video for us to see....58.....AWESOME !😁

You have the right idea every youtube video is speed upgrade I want range and hill eater

@darrenjackson6207

5 жыл бұрын

Hello ! I Eventually ended up using a 65T rear sprocket and it works great for hill climbs and slower speeds around 14mph.

@michaelanderson9792

5 жыл бұрын

what about two lithium bottle batteries mounted to the battery box sides

I just ordered the mod kit for mine. Variable speed throttle on ebay looking forward to getting started.also ordered the 65t sprocket wheel. The one you have seems too close to the ground may damage if a blow out or flat occurs.

@darrenjackson6207

6 жыл бұрын

Nikko Gutierrez cool bro. I am going to order the 65t too. But I love the torque of the 80t. The variable throttle is awesome.

@nikkogutierrez5393

6 жыл бұрын

Darren Jackson you are going for reduced speed I am increasing mine. Lol Look at this on eBay Razor Pocket Mod Rocket Variable Speed Kit - throttle controller, electrical kit

Gr8 video mate

I know this is an older video but how is that a 9ah battery when it clearly states its a 1.5 ah battery. Connected in parallel it would only be a 3 ah battery. Still a cool build and great info.

I switched to a 65t rear sprocket a few months ago and it does great on trails..

@harryfp1494

4 жыл бұрын

Ware you finding the sprocket

@darrenjackson6207

4 жыл бұрын

@@harryfp1494 on Ebay

@pancudowny

4 жыл бұрын

@@darrenjackson6207 Could you be a little more specific?

@darrenjackson6207

4 жыл бұрын

@@pancudowny On Ebay do a search for a Razor E300 65T rear sprocket , I just did a search and there are a few available.

Please tell me how to change the motor sprocket, in wich way to rotate to release?

Dj ya gained a new sub

So glad I came across your video! I’m got a used E300 and I want to overvolt the stock motor with a 36v 9ah battery with a new variable speed . I just want to go for longer distance and make it up some small hill...I’m not going for speed. I’m switching to lithium batteries like yours. Can you please do a video on how to connect the batteries in a series and with what connections you used batteries, connections to the control box, and do you still use a 14 gauge wire? I tried searching for e300 upgrade vid but they all talk too fast and the instructions are not very clear. Do you have any suggestions able the amount of amp on the battery so I don’t burn out the stock motor? Thanks!

@darrenjackson6207

5 жыл бұрын

You must connect the battries in parallel not in series for a 36v set Also you will need a 3way parallel plug. Check out my other scooter videos for more information

I'm 6'3" 290....I bought 36v1000watt scooter $500...its awesome! Perfect speed 20 mph.

@darrenjackson6207

5 жыл бұрын

Whats it called, I would like to see it

@psi3000

2 жыл бұрын

@@darrenjackson6207 sames

What batteries are those? Can you provide some details about them? Ebay has a million but not this size.

So how can you get the chain on is so big ?

yooo looks good

@darrenjackson6207

4 жыл бұрын

Thanks bro

Pretty sweet. I'm actually in the process of gathering the parts I need to mod the razor pocket mod scooter. Not trying to go fast, 14 is good enough, all I'm really interested in is the range. I'm trying to go 30miles. How much do you get out of those tiny ones?

@darrenjackson6207

5 жыл бұрын

With 3 4.4ah packs you can get 16 to 18 miles at moderate speeds so you will need like 6 4.4ah packs to get 30 miles.

Damn i want a trail scooter

@darrenjackson6207

6 жыл бұрын

Lol yup its a lot of fun.....my top speed is 10mph as of today with the 80t sprocket. I will probably go to a 65t for a bit more ground clearance.

I wonder if you can use DeWalt batteries

Hill climbing monster 👍

Just bought a like new E300 for $80 off Craig's list, the guy won it in a raffle, and have stripped it. Replacing the motor with a 48v 1000w, new variable speed throttle and speed controller and four 14.8v lithium batteries. I don't want to go fast either but do want to go uphill at maybe 15mph to give the dog a good run. She has too much energy and just walking doesn't cut it. So it's really for her more than me. I have a 3000w bike.

@darrenjackson6207

4 жыл бұрын

Awesome bro.....if you use a 65t rear sprocket it will climb hills really good

I wish there was a usb c mod so you can charge it super fast bc mine takes around 10 hours stock to full battery.

I was going to buy that for a 10 year old, but decided against it for the chain---too noisy. I wanted to do the mods like you did. I wound up getting the GoTrax V2 for the kid. I'm getting a Dualtron for myself.

@darrenjackson6207

5 жыл бұрын

Dualtrons are awesone.....just too fast for me.

Do you think the frame actually hold more than 220 pounds, and it only recommended that weight capacity because of the motor, and not the frame?

@darrenjackson6207

4 жыл бұрын

My brother weighs 250 and it pulls him around fine with the 350 watt motor upgrade. The 220 limit is due to the 250 motor.

@darrenjackson6207

4 жыл бұрын

Go with s 65t rear sprocket....its a good balance

@oneeyemonster3262

4 жыл бұрын

There's only 200watt motors in a Wheelchairs ( but 2-ea)..it's gear for torque. The wheel chair it self wieght 100lb..it'lny do 5-6 mph. The stock motor...sort of struggle with me on it...From time to time...bmaybe it just needs new brushes Im only 145lb i just went ahead and got 1000watt 48V motor and set up...It's still only $80 It'll have more torque and speed...Plus alot of it ..is I wont be over working the motor and batteries..I dont have to go fast all the time. It's actaully better to have this than a car where I live..At 20 Mph... I can beat auto to final distentions...i dont have to fight..traffic or parking. i wish i had it ..when I lived 3 miles outside of town.... After my car broke. (i had to walk to the store 3 miles each way every other day to the store to get light supplies)...I'd just mount a small hook..so i can tie a wagon..to haul stuff..if I need to .lol It's something good to have..even in SHTF..Use solar to charge the batteries.. if i have to. i got 2-ea fore FREE :-P .

Did the 350 fit perfectly. Did the holes line up with the frame and motor. And can i use the same stock sprocket?

@darrenjackson6207

5 жыл бұрын

Yes the 350 moto was a direct fit. The 350 comes with an 11t sprocket. I don't know if sthe stock sprocket will fit due to the motors being different.

@darrenjackson6207

5 жыл бұрын

You may have to make the chain a bit longer I'm not sure but I think the best option is to go with the 65T rear sprocket which means you will have to have a longer chsin

Where do you buy the batteries and how do you hook it up in parallel?

@psi3000

2 жыл бұрын

Parallel is positive to positive , neg to neg. Same voltage.

Damn you give great info etc but at least give us a warning that there is NO demo!!! I wanted to see this beast in action!

@darrenjackson6207

4 жыл бұрын

Your right bro......my bad

@darrenjackson6207

4 жыл бұрын

I ended up going to a 65t because the 80t sprocket was too close to the ground.

Why did you go to the 65 sprocket? Not enough speed?

@darrenjackson6207

4 жыл бұрын

The big sprocket was too close to the ground. 65 t is just right

I find those all the time at donation drop-offs.. I gut'em and have a ton of parts. Wanna build an R2-D2 like droid.

@khaliltheenlightenmentbomb3423

4 жыл бұрын

R2 droid love to see it when it is half done...

would those batteries work with the factory control & motor? 24 v

@darrenjackson6207

5 жыл бұрын

No. Its 36v....it would burn up the controller.

@nikkiward7858

2 жыл бұрын

I'm sorry help me understand how a 36v battery pack would burn up a 24v controller when the battery pack can only get 24v of power from the controller to the battery.

@jacobramirez4894

5 ай бұрын

@@nikkiward7858because the controller is only for 24 volts

I would looooove to know where did you get that 36v 350w motor for $30. I've been looking everywhere and the cheapest I can find is $70 Please post the link to the store you got it from

@darrenjackson6207

6 жыл бұрын

Hello, go to Monsterscooter.com, model number MY1016, its a 36v 350 watt 12.8 amp 2750 rpm motor. $44.99 current price. I got mine scratch and dent for $29.99. I would recommend a 65t sprocket because the 80t sprocket is too close to the ground...but you do get awesome torque. I hope this helps you out.

@elisendopruneda484

6 жыл бұрын

Darren Jackson how long is the ride 30min 45min??

@darrenjackson6207

6 жыл бұрын

elisendo pruneda it depends on how you ride it. I would say over 2hrs. It tops out at 10mph acording to my speedometer app.

@peazy7

5 жыл бұрын

@@darrenjackson6207 Thanks Bro

Just got on

How many teeth does the sprocket have?

@darrenjackson6207

5 жыл бұрын

80T BUT please go with the 65T , the 80t will scrape the ground when corning

@kwoods3379

5 жыл бұрын

Darren Jackson ahh... thank you!

Where to buy this bigger sprocket

@darrenjackson6207

3 жыл бұрын

On Ebay

I bought e225 hold 150lbs used 40$

But if you have 9 ah wouldn't you go less distance??????????? why not put 12 or so ah ?

@darrenjackson6207

4 жыл бұрын

I didn't have the money at the time

@ccccen

4 жыл бұрын

@@darrenjackson6207 couldn't be a better answer :)

Yea I want to eat the hill no problem

@darrenjackson6207

5 жыл бұрын

I reccomend using the 65t sprocket....you get more ground clearence.

@retromaticmike5388

5 жыл бұрын

Yes looking on ebay good amount Craigslist near me over priced junk

That stock motor would have been better

noisy motor..no good..I have to replace motor probably 3kw and extend the frame rear end replace also chain and sprocket 44T and motor sprocket install additional 5v/12v LED lights

@darrenjackson6207

4 жыл бұрын

Awesome..I really want to see how you do it

gods sake get on with it

You say it’s cheap I say it’s a lot of money I can only afford a e90 for my brothers birthday

NAanh

I ordered an 1800w 48v motor, a 32amp controller, a 38tooth back sprocket and 11tooth motor sprocket and an 18ah lithium battery. Got the scooter for free so figured why not throw $300 into it to make it ridiculously fast. thinking I might want to get good health insurance as a cherry on top though cause that first wreck is gonna huuuuurt

@darrenjackson6207

5 жыл бұрын

Your motor will have little ground clearence so be careful

@chuckbailey6835

2 жыл бұрын

Where did you find a 38t sproket

Scooters are cheap used