You snuck this video out on a day I was road tripping, Rick. Your finishing touches are perfect. Beautiful build!

@BustedKnucklesBuildsTexas

Ай бұрын

lol , got to get them videos out when we can .. lol and thank you brother !!👍👍

As a 52 y/o gen X'er.That has got to be one of the coolest things I have ever seen.

@BustedKnucklesBuildsTexas

27 күн бұрын

Thank you for watching !!👍👍

Been a fitter/welder and all around trinkerer/scrounger since a kid ( '50,s) so gotta tell you how cool your stuff is ,enjoying it immensly ,keeper up ,love it .

@BustedKnucklesBuildsTexas

7 күн бұрын

Thank you so much !!!👍👍👍

I'm surprised I've never seen a David Bradley walk behind tractor hood on one of these. Cool toy.

@BustedKnucklesBuildsTexas

Ай бұрын

That would be cool , Thanks for watching

I have two of those opposed twins Briggs & Stratton engines. The engines are freaking stellar. They also sound really good too especially if you rig up aftermarket exhaust for it they sound like a beast. Put a nice air filter on that carburetor and that engine will last you a lifetime. I like the carburetors they're very easy to work on You don't have to take the carburetor off to clean it or to rebuild it. 👍👍👍👍

@BustedKnucklesBuildsTexas

Ай бұрын

Yes sir for sure !! Thanks for watching

@charliejones7574

12 күн бұрын

I keep mine too. Even "broken" there are good parts. 20's, 19.5, couple if 18's...been mowing with the same 19.5 that I baught NOT running, for 8 years

Chuck and Ben have been bugging for a gokart. I might have to do something along these lines for them too!

@BustedKnucklesBuildsTexas

Ай бұрын

You should do it !! Use old junk stuff to keep the cost cheep and fun !👍

@nicsminibikes

Ай бұрын

@@BustedKnucklesBuildsTexas I have an old 1968 7hp Briggs that I think would look killer sitting up front too.

Nice work, Brother Rick! I freaking love it! I'm glad you were able to make good use of the wagon. I'm geeked out for the shout out also!

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you brother !!!

This is the bad asses machine I’ve seen . New sub here . I will have to go back and see your other builds on this machine to see how you made the steering !!

@BustedKnucklesBuildsTexas

3 сағат бұрын

@@inthebackyardwithdel438 welcome to the Chanel . Thanks for watching 👍👍

That thing is awesome dude !! With a little trailer to pull behind it. ( big enough to fit a couple tires in ) I’d take it to swap meets and offer to haul ppls parts to there car for them for $5 bucks a trip or possibly even shuttle the folks themselves back and forth ! Gotta have a little hustle when the opportunity presents itself and make yer gas money back 😉

@BustedKnucklesBuildsTexas

Күн бұрын

That’s a great idea !!! Was going to build a trailer to haul a minibike on it

That thing is awesome, cant wait to see it in person!

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you !!👍👍

Too Kool for skool, I dig it, nice work

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you for watching 😁

Rick what an awesome Job! I bet the grandkids would love to drive the rat rod. It really looks good in clear coat and the baby moons look awesome. I think your right sir about needing a horn. You are very creative. That will look great at a minibike show and should draw alot of attention for sure. 👍✌😎🇺🇸

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you sir !!!👍👍

Yeah that's going to turn out really nice. I didn't know that you were making that to go slow. It would be cool if you could find a way to mount a mowing deck on it! As that would make a cool lawn mower. Also a great way to get your grandkids to mow your yard. Lol. Great work!

@BustedKnucklesBuildsTexas

2 күн бұрын

@@TheBirdFlu666 now that’s an idea !! Thanks for watching 👍👍

@TheBirdFlu666

2 күн бұрын

@@BustedKnucklesBuildsTexas no problem your welcome.

Almost sounds like a 750 Harley! Good work!

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you !👍👍

Cool little rod!! Love the mechanical sound of it going down the road.

@BustedKnucklesBuildsTexas

Ай бұрын

Thanks for watching !!👍👍

Love it. I was thinking something similar but where you sit down more in it. extend the body back some, a 5 gallon jerry can (or similar size can), working side pipe on 1 side with a dummy one on the other (custom made glove box that looks the same as the other side pipe), trailer hook, and a custom top (that folds up so you can sit in it).

@BustedKnucklesBuildsTexas

14 күн бұрын

👍👍

Man that's the most awsome thing I've seen

@BustedKnucklesBuildsTexas

19 күн бұрын

Thank you !!👍 And thanks for watching 😁

nice rat rod ricky i love it

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you !👍👍

Thats a awesome rat rod

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you sir 👍🙌

Airbus in their AS350/H125 main rotor transmission uses the same gaskets to seal them. Then requires something called proseal around all the bolt & nuts and where they meet.

@BustedKnucklesBuildsTexas

26 күн бұрын

Thanks

real cool build, earned you a subscriber

@BustedKnucklesBuildsTexas

2 күн бұрын

@@anthonygagliano2159 Thank you !!!!👍

Looks awesome buddy you do amazing work

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you !!

That's cool good job Rick love it !

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you !🙌🙌

coolest thing I have seen ........... well done buddy

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you !!👍👍

Very cool way to go 👍

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you 💪

bro that thing came out bad ass!!! wish i woulda held on to that riddin mower i got free to do something like this. i just dont have that kinda shop room, the ol lady already dont like that ive got the whole garage for my minis. good stuff rick!!!

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you !!

You did one heck of a good job on that. It looks really cool looking. And a frame a wheelbarrow and a wagon on the back lights on the front Nice tires. That things looking nice oddly but it's looking nice. Seeing this makes me want to build one up like that similar

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you , and thanks for watching 👍👍

@andrew4403

12 күн бұрын

Keep up the good work and I'll keep watching. And you're welcome😊​@@BustedKnucklesBuildsTexas

@BustedKnucklesBuildsTexas

12 күн бұрын

@@andrew4403 Thank you !😁😁😁

Pretty dang cool 👍

@BustedKnucklesBuildsTexas

Ай бұрын

Thanks 👍

I love it, looks good😂 Greetings from holland the netherlands

@BustedKnucklesBuildsTexas

10 күн бұрын

Hello 👋 , Thank you for watching 👍👍

That's cool...Harbor Frait has a horn .

@BustedKnucklesBuildsTexas

Ай бұрын

Thanks

Awesome man that is cool

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you !!👍👍

That is 110% COOL!!!

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you !!

Way cool!

@BustedKnucklesBuildsTexas

22 күн бұрын

Thank you 👍👍

Love it .

@BustedKnucklesBuildsTexas

2 күн бұрын

@@darwinfoster7420 Thank you !😁👍😁

Super cool man! I subscribed.....😊

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you !!!👍👍

that is so cool

@BustedKnucklesBuildsTexas

Ай бұрын

Thanks !👍👍

I think it'd be cool to put some shocks on it.😮

@BustedKnucklesBuildsTexas

12 күн бұрын

It could use some

Supper cool

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you 👍👍

I'm 3'10 going have build one for my self.

@BustedKnucklesBuildsTexas

Ай бұрын

Yes you should !! 👍😁

Two little mirrors, make the stems out of little pieces of rebar

@BustedKnucklesBuildsTexas

Ай бұрын

Cool idea , thanks !

need to swap the pullies so you can go just a little quicker dont need race mower ratio but something a little closer to a yard kart speed would be great.

Those sawtooth golf cart tires look like ol' skool Micket Ts 😂 Where'd ya get the smoothies?

@BustedKnucklesBuildsTexas

Ай бұрын

Thanks , I think so to , got the from a guy at a swap meet , he had them on an old golf kart

I cut those gaskets. Kinda simple

nice

@BustedKnucklesBuildsTexas

24 күн бұрын

Thank you 👍👍

Mexican Style, Baja, horse blanket, amazon for $22

The aim on the headlights is interesting. Lol

@BustedKnucklesBuildsTexas

Ай бұрын

Thanks , got to work on that

hi from new zealand

@BustedKnucklesBuildsTexas

Ай бұрын

Hi !! Thanks for watching 👍👍

Iam gonna build me one..thanks

@BustedKnucklesBuildsTexas

19 күн бұрын

You should , it’s a lot of fun !!

Honken rad man..!

@BustedKnucklesBuildsTexas

Ай бұрын

Thank you !

dude Paint the inside were your Gran kids are sitting, and put a nice soft seat., And how big is the Pulley on the motor.

@BustedKnucklesBuildsTexas

17 күн бұрын

I think I will do that at some point , it’s a comet 40 series driver

Trailer to go behind the rat kart for mini rat...or not rat bikes.

@BustedKnucklesBuildsTexas

Ай бұрын

I like that idea !!!! What the wife said to !!👍

how fast is it going about 10 mph

@BustedKnucklesBuildsTexas

Ай бұрын

Around 25 mph

how fast does it go

@BustedKnucklesBuildsTexas

Ай бұрын

Around 25 mph

Harbor freight has cheap plastic Aauga horns

@BustedKnucklesBuildsTexas

Ай бұрын

I will look into that

Great job I love it 🍻 what about a little tilt windshield

@BustedKnucklesBuildsTexas

Ай бұрын

Great idea !!!! Thanks for watching

Put you a riding mower seat in there