RARE mods | BEST Ducati Streetfighter V4S yet!
Автокөліктер мен көлік құралдары
No BS, this is the BEST Ducati Streetfighter V4S I've seen yet with some never-seen-before mods!
How much do you think this insane Ducati Streetfighter V4S worth?
What would you have done differently?
My favorite thing about it is the custom matte paint and all the matte carbon fiber.
( CORRECTIONS NOTED BELOW. Please comment corrections.)
Here's the mod list, as I know it so far:
• Full Titanium Akrapovic Exhaust system
• BST Rapid Tek Carbon Fiber Wheels
• Carbon fiber side panels from full six
• Carbon fiber winglet replacement from full six
• Carbon fiber frame covers from full six
• Carbon fiber front and rear fenders (front is • Ducati Performance, rear is FullSix)
• Carbon fiber tank cover from full six
• Carbon fiber handlebar (aluminum core, CF wrapped)
• Carbon fiber AEM levers
• Carbon fiber tail
• Bren Tune
• Sprint P08F1-85 racing air filter
• Custom Matte Red with retro Ducati logo
• CNC racing clear clutch cover
• CNC racing adjustable rear sets PRAMAC limited racing edition
• Rizoma pegs
• Rear Brembo racing master cylinder
• CNC racing frame plug covers
• Moto Corse engine motor mount
• Rizoma front axle slider
• Red machined oil pan protector
• Quick Release Oil Filter Retainer
• CNC machined oil replacement cover for stock ABS part
• Carbon fiber seat nub
• Carbon fiber mini fairing from Ilmberger !! (CORRECTION)
• Mirrors from Motogadget
bar end signals from Motogadget
• Front wave brake rotors from Galfer
• Braking Rear Brake Rotor
• Custom 1 of 1 swing arm license plate mount from Daedalus
• 520 Chain Conversion
• CNC Racing Machined Sprocket Carrier
• Carbon Fiber Wwing Arm Cover from FullSix
• Matching red powder coated rear suspension spring instead of Ohlins yellow
• Carbon Fiber under tank cover
• CNC Racing clutch skid guard
• CNC Racing clutch sight cover
• Titanium Kickstand Nub
• MotoCorse rear suspension support
• SAMCO red silicone racing coolant lines
• CNC racing seat cover
• CFM machined fluid resevoirs
• Brembo RCS Clutch and Brake Master Cylinders
• Titanium Bolts everywhere
• CNC Racing machined top triple clamp
• Motogadget CNC grips
• CNC Racing machined and carbon fiber gas cap
• Carbon Fiber ignition cover
• Integrated Tail Light
• Custom Forged Carbon Fiber rear signals
• Plate Mount LED signals in Forged Carbon
• Hidden anti-theft device
*UDPATE: This bike is SOLD!
Up Next: Onboard Videos from the Aprilia Track Day at Circuit of The Americas last week and, YES, the elusive DYNO videos of the RSV4 AND Tuono V4 with the SC Project GP22 exhausts and custom Gabro race maps.
Thanks for watching!
SUBSCRIBE HERE: / @victor_moto
FOLLOW ME HERE: / victor_moto
Aprilia Shop: www.motoclubsantamonica.com/
Accessories Store Online Shop: motoclubofficial.com/
Ducati Shop: www.ducatisantabarbara.com/
#ducati #streetfighter #termignoni #carbonfiber
Пікірлер: 295
so are we just gonna ignore the fact the bro is literally riding in GTA??
@Victor_Moto
Жыл бұрын
Haha! 😜
That bike is sick AF! Thanks for sharing this with us!
@Victor_Moto
Жыл бұрын
My pleasure. This one was next level.
Looks absolutely stunning!
@Victor_Moto
Жыл бұрын
I thought so too.
That thing is out of this world , money aside its very tastefully done ; big congrats 🎉
@Victor_Moto
10 ай бұрын
I agree. Very impressive.
@asiafas
10 ай бұрын
That satin red ! Wow!!!
@asiafas
10 ай бұрын
Mama Mia 😊
Madness!! $$$$$$ never seen a bike this modded before (besides customs). Love it.
@Victor_Moto
Жыл бұрын
Absolutely mad. Thanks for watching ! ✌️
Looks so damn badass, love it!
@Victor_Moto
Жыл бұрын
Bang! Yes it does. Thank you.
Very smart choice with the red satin so it matches the red anodized parts !
@Victor_Moto
Жыл бұрын
🤔
Looks menacing! 🔥🔥🔥
@Victor_Moto
Жыл бұрын
And it rides really well.
Love the Daedalus swing arm on there! Nice modification to make that work on your bike, looks right at home
@Victor_Moto
Жыл бұрын
Thanks! Credit to Alan. 👌
Be careful driving lane splitting that mortgage brother 😂
@Victor_Moto
Жыл бұрын
Lol! I'm going to use that. 😂
Asking price was $38,000. Subscribe here: kzread.info/dron/u1Dl5fKlzZg3QRn2b3-B2A.html
You finally got new gloves! 😂 This thing would sell for $50k easily with all those mods. I’ll stick with my Triumph Speed Triple 1200-I just wish there were more mods avail for it
@Victor_Moto
Жыл бұрын
Lol! . 👋
Insane build right there !! Wouldn't want to add up those mod costs lol. Yeah I agree re grips I'd also just do the NRC tail tidy , not a fan of plate over rear tire. But very impressive build 👏 👌
@Victor_Moto
Жыл бұрын
Now that you point it out, I would also get rid of the plate over the wheel. Not sure about NRC though.
@ghlibisk67
4 ай бұрын
Futurismoto > NRC
Not a fan of the wavy rotors but otherwise it's pretty amazing. The winglets are worth specifically mentioning, they look great. The whole thing looks purposeful and slick.
@Victor_Moto
Жыл бұрын
I probably agree with your comment more than any other on this video so far. I love the winglets and most of the bike.
Awesome looking bike ❤
@Victor_Moto
10 ай бұрын
One of the best.
Jesus christ!!!!!! Victor that thing is a mortgage literally that should be the title of the video 😂
@Victor_Moto
Жыл бұрын
Lol! I like that.
Such a beautiful bike. Absolutely worth every penny. Seriously thinking about getting a Streetfighter V4S now. I don't think I'd leave it red. Though the satin red looks amazing.
@Victor_Moto
Жыл бұрын
I'd probably add red or remove some.
@3E30P
Жыл бұрын
how much was the sell price?
@Victor_Moto
Жыл бұрын
@@3E30P Since it's for sale at another dealer now, I don't want to say. They are asking $35,880. See here: www.rossocorsagallery.com/bike.php?bike=754
@MrJonnyh1972
5 ай бұрын
Get the black version!
Love those winglets from the norm.
@Victor_Moto
Жыл бұрын
Yea. Those winglets add class to it.
Mona Lisa of street fighters
@Victor_Moto
Жыл бұрын
Well said!👏
Hands Down the BEST Modified Streetfighter V4S I have ever seen. I don't like Ducati, but THIS Bike is my favorite Duc yet. By the way, the tune has the bike idling on all 4 even in Neutral, love it!
@Victor_Moto
Ай бұрын
I agree! Love this bike.
oh my... very nice!!!
@Victor_Moto
Жыл бұрын
It blew my mind.
Liked and subscribed! This is my next bike! This build is perfect, such a beauty! How much did it sell for?
@Victor_Moto
11 ай бұрын
Thank you! I was told around $30,000.
@818_MT-09
11 ай бұрын
@@Victor_MotoI was guessing between $32k-$35k, so I was close! 🤙
Beautiful, the carbon under is a tank protector
@Victor_Moto
Жыл бұрын
Under the subframe?
One word “Awesome”
@Victor_Moto
Жыл бұрын
So awesome!
This mod is already sick but since you asked us what we could suggest for other mod options then I would suggest WSBK or MotoGP spec on the suspension and braking system. I think those parts cost like another Ducati bike to install. I have seen a number of bikes in Thailand that have those parts on which are totally over spec for leisure bike riders but they are great conversation pieces.
@Victor_Moto
Жыл бұрын
That would be the pinnacle for brakes and suspension. That would be incredible.
6:00 my heart was banging. DDOONNNT DROPPPPP IT !!!
@Victor_Moto
Жыл бұрын
Hah! Never. 😬
Amazing!!!
@Victor_Moto
Жыл бұрын
💯
@sparrow-orange-rider
Жыл бұрын
I have a Ktm DUKE 890r the Ducati S.F. v4S are MY DREAM!😅
@Victor_Moto
Жыл бұрын
@@sparrow-orange-rider You're close.
@sparrow-orange-rider
Жыл бұрын
@@Victor_Moto 😅
Got that rear turn signal on my street fighter v2. I think best out there
@Victor_Moto
Жыл бұрын
What brand is it?
The problem with selling a bike with mods (the question you ask) is that it actually hurts resale value because mods are a very very individual thing. Guys want to start with a blank, fresh canvas from which to personalize. I hate covers, which adds weight, and cheap parts replacing high quality stock parts. Ducati is a special, premium brand that shouldn’t be cluttered too much by cheapness or common parts that everyone else has on their bikes. When I see a bike with mods, what I think about is that it must be cheap enough for me to undo everything. Yes, it turns heads but I wouldn’t want that in my garage vs a completely stock one. The carbon wheels and fender is only thing I’d want on that. But trash all else especially paint job.
@Victor_Moto
2 ай бұрын
I agree that customizing a bike generally does not add value. This one is an extremem example and would require finding a very special buyer that see value in the mods. Thos guys are out there.
@mikemccormick8115
2 ай бұрын
@@Victor_Moto 👍🏻
eccellenza italiana, i just say everything !
@Victor_Moto
10 ай бұрын
💯
Also there is a quick release oil filter retainer
@Victor_Moto
Жыл бұрын
Good eye. Added to description.
Motomillion SF is extensively modified. I believe 50k or more.
@Victor_Moto
Жыл бұрын
Mani's SF is awesome.
@skywalker7517
Жыл бұрын
Jaret built one sick of a street fighter for a giveaway maybe 2 years ago I believe it was over 50k easy!!
@Victor_Moto
Жыл бұрын
@@skywalker Here's a video I took of Jaret's Streetfighter a couple years ago: kzread.info/dash/bejne/YmSnmtFwYKTJecY.html Jaret's bikes are always the best at the time they are built. But I think this SF surpasses it with all its detail. Some say this one is overdone. 🤷♂️
@robinthepresent2952
Жыл бұрын
Sprint F1 filter is only good for track use, sucks in far too many particulates for road use, I downgraded to a lesser version for better filtration
Is the kickstand painted or powdercoated black? They all come natural aluminum. Would love a black one.
@Victor_Moto
5 ай бұрын
I believe it was painted or powder coated.
Nice bike, only thing I don’t like is the fly screen.
@Victor_Moto
Жыл бұрын
Yeah. Lower produce would be nice.
For that engine mount , did you have to Jack up the motor? It slides right out ?
@Victor_Moto
8 ай бұрын
I'm not sure, we did not install that part. But I would think that supporting the motor up would be required or at least help.
Hey awesome build. I'm trying to install the same rear master cylinder on my V4. Did you have troubles getting it to build pressure or did you have any problems bleeding the system?
@Victor_Moto
8 ай бұрын
I don't remember. This was a customer's bike and he sold it a while ago.
@MotoGarageTV
8 ай бұрын
@@Victor_Moto bummer, no problem. It was a long shot. Thanks
@Victor_Moto
8 ай бұрын
@@MotoGarageTV 👍
@elespuru1
4 ай бұрын
@MotoGarageTV banjo bolt with bleeder on top, no trouble at all building pressure or bleeding. Bleeder bolt was required though
@MotoGarageTV
4 ай бұрын
@elespuru1 thanks, I've got a banjo with bleeder, and I'm still having issues. It's driving me crazy. Thanks for reaching out. Any help, much appreciated.
Looks like aftermarket Brake Rotors Maybe Galfer?
Satin red is stunning, not a fan of all the red anodised bits, would prefer black or silver. Never seen those winglets either. Tank pads and plate holder not for me. Still well put together though. Each their own.
@Victor_Moto
Жыл бұрын
I agree with the extra red everywhere.
@Cosmicindustries1982
6 ай бұрын
I also
how reliable(for both longevity without mechanical or electrical issues) is this bike compared to the hayabusa or even the BMW s1000R(or RR) ?
@Victor_Moto
Жыл бұрын
Good question. I don't have a lot of experience with Suzuki but I would they Japanese bikes are generally pretty reliable. The Ducati V4 models have been very reliable for a couple years now (since after their first couple years in production). The S1000 motors have also seemed solid. I think you're good with any of those 3 right now. They are not first generation models anymore. But if I HAD to rank them, I'd say Suzuki, Ducati then BMW in terms of reliability. But I would choose the Ducati. I don't think I'd ever own or prefer a Hayabusa.
@markettradinggenius
Жыл бұрын
@@Victor_Moto thanks my man....appreciate it...
@bekeneel
Жыл бұрын
Just look at what bike you need, like a cruising bike, to drive on highways etc, or more of a racing bike with less comfort..
some good changes, some the original parts are nicer. I think the brake and clutch fluid tanks are great. Where can I find these? I can't find anything about CFM. Can anyone help me? Thank you
@Victor_Moto
6 ай бұрын
Some of these parts are very hard to find.
The red oil pan guard is from Desmoworld in Germany 💪🏼
@Victor_Moto
Жыл бұрын
Desmoworld ! Thank you.
rear spring has also been painted
@Victor_Moto
Жыл бұрын
Noted.
What’s the brand of the windscreen? Don’t think it’s rizoma
@Victor_Moto
7 ай бұрын
I think I mentinoed it in the video. It must be Rizoma or Ilmberger.
Outta budget even more expensive than the R with the carbon fibre
@Victor_Moto
Жыл бұрын
I agree.
Very interested in what those tank pads are can’t find them
@Victor_Moto
10 ай бұрын
I'll try to find out. It's a long shot.
damn I want one
@Victor_Moto
Жыл бұрын
Apparently it's for sale here in California.
What’s the interstate turn signal is there a brand or mod to do that
@Victor_Moto
Жыл бұрын
Which turn signal?
Anyone have the info of the custom painter ? And as soon as I'm ready I'm gonna have you put together a Tuono Factory with this much detail for me. 🙏🏼 🇮🇹🏍️
@Victor_Moto
Жыл бұрын
That would be awesome. I have the painter.
What brand are the reservoirs? They look like motocorse but not. I can’t find CFM anywhere.
@Victor_Moto
Жыл бұрын
I can't seem to locate them either. I'll ask some suppliers and reply back if they know.
@HBChandler
Жыл бұрын
@@Victor_Moto thank you! They look super slick. I search everywhere. I even looked for knock off motocorsa reservoirs and nothing showed.
@drbehi85
Жыл бұрын
I’m keen to know too!!!
@Victor_Moto
Жыл бұрын
@@drbehi85 "Rare" mods. ;)
@HBChandler
Жыл бұрын
So I bought my streetfighter used. And I have the same reservoirs. I just thought they were motocorse. This video was the 3rd time I’ve seen them and no one knows who makes them or what they are. Hahahaha
Someone had A LOT of money to piss away!
@Victor_Moto
5 ай бұрын
#Goals.
@gamez9193
4 ай бұрын
@@Victor_Motohahaahahahahhaahhahahaha are they multistrada rearsets😂😂😂😂why why
It's clean for sure, think they went a bit overboard on all the red anodized parts. A little is ok, but way too much on this one IMHO. Bad ass bike though.
@Victor_Moto
Жыл бұрын
I agree. I'd use about 20 - 50% less little red anodized bits.
What brand is the rear indicator
@Victor_Moto
5 ай бұрын
Chekc out Futurismoto.
Too much red in my opinion. I think the tank etc. is cool. The front mask in red is far too much, as are the footrests and all the red screws. It's always a different shade of red. That doesn't go together. Why the number plate behind the wheel???? I like the motomillion with red, carbon and the gold marchesini. That looks awesome.
@Victor_Moto
Ай бұрын
There is lots of red.
What year bike was it and how many miles were on it?
@Victor_Moto
10 ай бұрын
I believe it was a 2021. Around 4000 miles.
What were the tank pads?
@claytonbrown7842
Жыл бұрын
Found it.
Get rid of the red anodised items 😢reminds me of 20 years ago when it was cool,
@Victor_Moto
Жыл бұрын
I get that.
@TomAndOakley
5 ай бұрын
I was thinking the same thing. Especially after a few more years. All that red anodized will look cheap.
Great bike.Can you tell me the paint code?
@Victor_Moto
Жыл бұрын
I don't know it. I'm sorry.
how anyone can drive with the mirrors over there ? i am wrong ?
@Victor_Moto
Жыл бұрын
They work decently in that position.
@robinthepresent2952
Жыл бұрын
I tried in that position and had no vis, up is good and down is crap
Whats the windscreen?
@Victor_Moto
Жыл бұрын
It's actually Ilmberger.
• All Upgrades done by Ducati to retain Warranty • All Service Up To Date • Factory Warranty until July 2023 • Bren Tune and Sprint P08F1-85 Racing Air Filter • Custom Matte Rosso Corsa Red (Stock Color, Just Matte) Paint Including Retro Logo (Other Livery Elements Are Vinyl So You Can Change if Desired • Full Titanium Akrapovic System • CNC Racing Clear Clutch Cover • CNC Racing Red Adjustable Rear Sets PRAMAC Limited Racing Edition • Rizoma Pegs • BST Carbon Fiber Wheels • Rear Brembo Racing Master Cylinder Replacement • CNC Racing Frame Plug Covers • Moto Corse Engine Motor Mount • Moto Corse Rear Set Replacements For Stock Forged Parts • Rizoma Front Spool Slider • Red Machined Oil Pan Protector • CNC Machined Oil Replacement Cover For Stock ABS Part • Carbon Fiber Side Panels From Full Six • Carbon Fiber Winglet Replacement From Full Six • Carbon Fiber Frame Covers From Full Six • Carbon Fiber Front And Rear Fenders (Front Is Ducati Performance, Rear Is Full Six) • Carbon Fiber Tank Cover From Full Six • Tank Pad Tanklets • Carbon Fiber Rear Seat Cowel • Carbon Fiber Seat Nub • Carbon Fiber Mini Fairing From Ilmberger • Mirrors From Motogadget • Bar End Signals From Motogadget • Front Wave Brake Rotors From Galfer • Rear Brake Rotor From Braking • Custom 1 Of 1 Swing Arm License Plate Mount From Daedalus • 520 Chain Conversion • Lighter Sprockets • CNC Racing Machined Sprocket Carrier • Carbon Fiber Swing Arm Cover From Full Six • Matching Rosso Corsa Red Powder Coated Rear Suspension Spring Instead Of Ohlins Yellow • Carbon Fiber Under Tank Cover • CNC Racing Clutch Skid Guard • CNC Racing Clutch Sight Cover • TI Kickstand Nub • Moto Corse Rear Suspension Mount • SAMCO Red Silicone Racing Coolant Lines • CNC Racing Seat Cover • Low Seat • Includes GDH $1k CF Swing Arm Stand • CFM Machined Fluid Reservoirs • Carbon Fiber AEM Levers • Upgraded Brembo RCS 16, RCS Masters • TI Bolts • CNC Racing Machined Triple Clamp Top. • Carbon Fiber Handlebar (Aluminum Core, CF Wrapped) • Removable Trip Machine Leather Grip Wraps • Motogadget CNC Machined Grips • CNC Racing Machined And Carbon Fiber Gas Cap • Carbon Fiber Ignition Cover • Integrated Signal And Matte Tail Lights • Plate Mount LED Signals In Forged Carbon • Seat Lock Removal For Theft Tracker
@Victor_Moto
Жыл бұрын
Copied from Rosso Corsa. 👍
@GClary1
Жыл бұрын
@@Victor_Moto How come they don't show it sold?
@Victor_Moto
Жыл бұрын
@Gregg Clary Because they bought it to resell, is my guess. So it's for sale again.
When money is not an issue.
@Victor_Moto
4 ай бұрын
#Goals
@gamez9193
4 ай бұрын
@@Victor_Motowhat the fuck ıs that .hahahahahahhaha it looks like a freak 🤮
Nice Build but wrong tire in the rear. I hope for the owner that everything works fine
@Victor_Moto
6 ай бұрын
How so? You mean the aize ?
@Comander41
6 ай бұрын
Right the size it‘s normaly 200/60 17
@elespuru1
4 ай бұрын
Rear wheel was sized to account for this combo, and part of why this SF has a different feel on the road (non-track), as Victor noted in the video from his feel during the ride in the video, is the less aggressive rear. The smaller wheel/tire combo in the back help tone the SFV4 down on the street. The ducati dash has a re-learn mode that makes it trivial to change, and swap street/track, smaller/larger as well fwiw
What tank protector(s) are those?
@Victor_Moto
5 ай бұрын
I don't remember. But those were my least favorite accessory on this bike.
@kblagg
5 ай бұрын
@@Victor_MotoThanks for the update. What's your favorite tank protector?
What is the name of the tank pads?
@Victor_Moto
Жыл бұрын
I'll ask and reply here.
@stephenweewoo
Жыл бұрын
They look like Luimoto tank leafs
@Victor_Moto
Жыл бұрын
That's correct, they are Luimoto Tank Leafds.
Stealth mirrors
@Victor_Moto
Жыл бұрын
I agree.
What’s your gloves
@Victor_Moto
Жыл бұрын
A joke from my previous video.
how many cost this clutch?
@Victor_Moto
Ай бұрын
Clear clutch cover? About $1,000.
I don't like the tire + Rotor.... Pirelli Supercorsa Sp V3 + Brembo T-DRIVE add it up Rather than that everything is good 👍 ❤
@Victor_Moto
Жыл бұрын
I'm with you. Michelin and Galfer? 😐
How much did it sell for?
@Victor_Moto
Ай бұрын
30k+
It modded so much that it looked like an mv agusta
@Victor_Moto
Жыл бұрын
Interesting point. I could see that. Is that good or bad ?
Is that the same bike Rosso Corsa was selling on there site for $35,880?
@Victor_Moto
Жыл бұрын
How long ago?
@Victor_Moto
Жыл бұрын
Yup!
@junito70
Жыл бұрын
It still on there website for sale $35,880 Rosso Corsa in Newport Beach .
@Victor_Moto
Жыл бұрын
@@junito70 that's a good price.
@junito70
Жыл бұрын
@@Victor_Moto It should be at least worth 40K those upgrades worth more then 15K.
Only thing of the original bike left is the the battery.
@Victor_Moto
Жыл бұрын
Not even the battery is original.
put on a Bottpower carbon fiber handlebar:)
@Victor_Moto
Жыл бұрын
Bottpower? Never heard of them. Will check them out.
Nice bike but the safety wire on the rear sprocket holder is driving me mad
@Victor_Moto
Жыл бұрын
It might be overkill but the attention to detail is nice.
@spinnoxx
Жыл бұрын
@@Victor_Moto its not the overkill part its the way that it is applied. Doesnt safety anything 😅
@Victor_Moto
Жыл бұрын
@@spinnoxx 🤷♂️
25 maybe 28k? I think it will be tough to find a seller who likes all that has been done. I’ve seen 50k in comments but I think that’s a stretch
@Victor_Moto
6 ай бұрын
I think it sold for nearly $40k.
@TheDougSpot
Ай бұрын
@@Victor_Moto If that’s true, they are on drugs
i hear a siren
@Victor_Moto
11 ай бұрын
Yup. Sounds about right.
I would put the bar end mirrors up not down, no visibility in the down position, I'd have also put a full six belly pan, and if we have a Richard Bransen budget I'd also put the carbon rear subframe and tank
@Victor_Moto
Жыл бұрын
Carbon belly pan would complete the bike! Good idea.
First 🔥🔥🔥
@Victor_Moto
Жыл бұрын
My man! 😎
@maxtraider6634
Жыл бұрын
Thank you for the notice. Subscriber from Philippines 🇵🇭 Ride safe always idol @Victor Moto. ✊🏻💨
@Victor_Moto
Жыл бұрын
@maxtraider Ditto, my friend! Ride safe! All Love. 🤜🏻🤛🏽
This bike is done better than any Jaret Campisi motorbikes
@Victor_Moto
Жыл бұрын
Until his next one!
Bike looks great but I'd take that race aprila rsv4 you showed us the other day.. Probably cheaper too lol
@Victor_Moto
Жыл бұрын
Me too. Yes, cheaper.
@bigGatster
11 ай бұрын
no way
@512460
11 ай бұрын
@@bigGatster yup and the rsv4 is race spec too. Food for thought
@Victor_Moto
11 ай бұрын
@@512460 💯
oh shit windscreen
@Victor_Moto
Жыл бұрын
Was that good or bad?
I won’t tell anyone I won the lottery but there will be hints
@Victor_Moto
4 ай бұрын
Haha!
Brembo Is the state of art of braking systems, Braking discs are crap: wasted money
@Victor_Moto
Жыл бұрын
Bit they're wavy. 😁
1 gallon of oil is $100.
@Victor_Moto
Жыл бұрын
That's right. Only the Best.
THOSE MIRRORS LOOK LIKE SHIT AND GRIPPERS REST ALL 100% GREAT JOB
@Victor_Moto
Жыл бұрын
The mirrors work well though.
On the right wing you put the Italian flag in wrong position
@Victor_Moto
Жыл бұрын
Good eye! It's upside-down.
looks tacky imho, I would just add some exhaust and maybe a tune.
@Victor_Moto
Жыл бұрын
Simple man. I get that.
I think jaret campisi was better?
@Victor_Moto
Жыл бұрын
Jaret's was awesome. But I think this one has way more detail. I have video of Jaret's first Streetfighter V4S from Santa Barbara. I'll share a short video comparison.
@superbikesquadracer
Жыл бұрын
@@Victor_Moto Cant wait!
Ma…il porta targa osceno!
@Victor_Moto
Жыл бұрын
Alcuni lo adorano.
@giaso73
Жыл бұрын
@@Victor_Moto certo Ma non costruito in quella maniera da carpenteria!
@Victor_Moto
Жыл бұрын
@@giaso73 Gesù Cristo era un falegname. 🤷🏻♂️
I whould say its worth 40 000$
@Victor_Moto
Жыл бұрын
Same. At least $35k.
why am i not seeing any GTA comments
@Victor_Moto
Жыл бұрын
Good question. My Yamaha R7 video was full of GTA comments.
That number plate mount though... Why ?🤢
@Victor_Moto
5 ай бұрын
You mean the flyscreen?
@MrJonnyh1972
5 ай бұрын
No, licence plate holder as you Yanks call it. Awful looking thing 🤢
you should buy it, then raffle it off $25 each 1500 tickets!
@Victor_Moto
Жыл бұрын
Smart. Is that allowed in California ?
TÜV sagt nein :(
@Victor_Moto
10 ай бұрын
Sagen Sie dem TÜV, dass es in Ordnung ist. ;)
$50G
@Victor_Moto
8 ай бұрын
Easiliy.
@MrPressPhotographer4
8 ай бұрын
@@Victor_Moto Yes more like $70g
Please shout out for me who did the work for u please 🙏🙏
@Victor_Moto
4 ай бұрын
I think Ducati Newport did some of it.
No , it’s too much
@Victor_Moto
Жыл бұрын
The price is too much ?
Farkles.
@Victor_Moto
Жыл бұрын
Are farkles good or bad?
Clear clutch covers are junk
@Victor_Moto
Жыл бұрын
What do you prefer? Dry Clutch Conversions ?
That tag bracket is straight trash. Ruins every bit of aesthetic
@Victor_Moto
3 ай бұрын
I like it. Where would you put it?