I do the same thing when it starts 😂 I’m always like.. “hell yeah I didn’t break it!” Great step by step I use it every time 🤘🏼

@day_RL

4 жыл бұрын

yooo cboys i love ur vids man

@Wilzd

3 жыл бұрын

Ye me to

Thank you bro your videos help me alot and your other video of the anti freeze replacement helped me out a lot as well

This was sooooooo helpful. I bought a 2017 raptor but couldn’t ride it that much over the winters here in Alaska but when I checked my oil last week just for it to be black, so I went straight to this video as it helped so much on my first time changing the oil on my quad and I just got back from riding right after changing the oil at my friend’s house and I used this exact method and it worked flawlessly first try without hiccups. A couple day before, I also used your same exact method for changing the coolant, it wasn’t ready to be changed but I wanted that crappy stock “company standard” coolant out of my 9,000 expensive engine. Im trying to get a summer job so I can get some actually useful mods and some eye candy mods as well as buy some fresh Maxxis race tires and some Maxxis snow tires so I can actually ride. I’m tired of sitting inside on winter days. Winters in Alaska last 7-8 months.

@akthrottle9078

5 жыл бұрын

James Pendergrass do you know any good spots to ride like sandy areas

@jamespendergrass8164

5 жыл бұрын

Ride*907 AK not really sorry

@akthrottle9078

5 жыл бұрын

James Pendergrass thanks anyways cool to find another person riding a raptor in Alaska.

Thanks Mang!.. I always go to this video before changing my oil .. handy to know what tools I need before even starting!.. 😊

I just done my oil and filter change today. The second time I've done it. But I did refer back to the video. 40mins max. Job complete👍🏼

I've changed my '19's oil 7 times since New. And EVERY time I watch this great video. What I did this last time is Jack-up the oil filter side and it prevents oil from leaking out of the oil filter area. 👌👍

@erickgutierrez2181

3 жыл бұрын

Did you only need two quarts because I just finishing changing the oil on my 19 raptor and it needs more oil In the oil pan

@mxb5346

3 жыл бұрын

@@erickgutierrez2181 yes. It was actually less than 2 qts. The first few oil changes I did, it took the entire 2 quarts , but now it's more like 1 3/4.

Should probably check the oil level a second time after you run the bike a couple minutes after the oil change to ensure it’s not too low after it cycles through the engine....that’s what I do

@senssii9828

5 жыл бұрын

How do you check the oil level?

@jonthelamb4549

4 жыл бұрын

Rubel usually a dipstick or a sight glass if not there is a bolt somewhere and you fill the oil till it starts drain out of it

@redrider533

2 жыл бұрын

Absolutely you need to run the engine. This is called a “dry sump” engine meaning the engine doesn’t technically hold oil. That’s the job of the oil tank. This is so the motor can remain as small as possible and to sit as low as possible in the frame to maintain a low center of gravity. You have to run the engine after adding initial oil volume and then check the level. You may need to do this a few times

Great video man! Thank you

Kewl vid. 👍🏻👍🏻 Raptor lil different to my Z. Bit of a pain filling two locations. Anyway, heres a thought. After pouring in your 1 1/2 - 3/4 qts of oil you should start the motor briefly, turn it off and let it stand for a min to allow the oil in the head to drain back before doing your final level check. Ive never been inside a Raptor motor but I’m sure theres a few nooks and crannies beyond filling the filter. Oh n you should leave the paper towels in the kitchen. Pick up a box of rags er least some rag on a roll blue shop towels. Im sure some one gets pissed every time that holder goes empty. Lol. Cheers

Thanks for posting! New to all this and video was a great help!

Thank you ! You are a big help

Would be great if you made a list of the tools and stuff you used to do this!

"you just stick it in there until it's kinda flush and feels solid..." Good advice 👍🤭

Much appreciate the step by step.

just wondering... for the break in period, i got a 2020 raptor 700r...same thing on the new ones? plus change the spark... and is it okay to change it earlier than 20 hours? thanks! great how to!

How do you know to pour just half a quart in the case? It doesn't say anywhere in owners manual

Hey I done exactly what you done I put half a litre in the motor and 1 litre in oil tank with that extra bit you said but my bike is read barely half until full on the dipstick

Try using a cut bottle on the oil filter it’ll help on the mess

I'm 16 and I bought myself a modded raptor 700 for my first quad...its great

@theonlygamer4131

4 жыл бұрын

will do that in 1.5y when im 18, europe is boring for licenses

@JGMochey

4 жыл бұрын

@@theonlygamer4131 I'm 17 now and I still got the raptor 700 lol , but yeah I Europe has a bunch of license laws, I didnt need one cause I'm in America. But be careful with them, you gotta have some throttle disciple with those things.

@theonlygamer4131

4 жыл бұрын

@@JGMochey ive heard about that yeah and btw is ur model a 2015+ one? And if so had any problems with rods cracking?

@JGMochey

4 жыл бұрын

@@theonlygamer4131 I have a 2007 700r with a high compression pistion and a cam. I haven't had problems with it, but the previous owner did have to replace the low end if the motor. Its running strong for me and the only problem I have Is changing the oil, just a pain but it's a yamaha so it's been really solid to me. Idk about the new ones. I've ridden a few 2017s and they feel the same as mine.

Solid video buddy 👍🏻

@bobbycoates5994

3 жыл бұрын

i have some flat land i would like to sell you cheap let me no ^^^^ this guy solid vid oil and tool and that is all i will say

Thanks a bunch bro!!!!

Hi Moto. I living in Florida state. What's is better oil 10w 40 Mobil 1 o Yamalube 10w 50 semi synthetic?? 2017 raptor 700r

This is very helpful thx man

@Motoposh

7 жыл бұрын

+James Pendergrass Sure thing!

Please tell me if the first oil change you did had gold flakes in it mine look horrible look like oil mixed with tiniest gold is that normal

Ummmm... what do you suppose the vent bolt on the filter cover is for? Hmmm

I have a raptor 700 2021 and I had there years with it and I have an oil flow how can I fix it and stop preventing oil to fill from the top

Super helpful thank you

Thanks for this video 👍👍👍👍👌

Thanks for video. Doing oil in morning

good job .... thank you

I like all your videos bro, but the owners manual don’t said anything about pour oil in the crankcase at all.

What should I do, input 2 Quartz in my case

Great video, rotella 15-40.

Just 1 comment. Just as the old oil flows better warm, also if you remove the filler plugs first your oil evacuates much faster taking more debris and rubbish with it. Not to mention much quicker as a bonus.

Where do you order your stuff to do that all change

Love the video, really appreciate all the tips you give. Also, where can I buy parts, or where can I get them? Thanks man.!

@Motoposh

4 жыл бұрын

Thanks man, I have a link for oil and filter in description. What other parts are you looking for?

What happens if u put more than half in the case

VERY IMPORTANT I HAVE ALREADY FUCKED UP ONCE. Make sure you DO NOT over tighten the oil drain bolt 3:13 I fucked up and stripped mine, luckily I was able to tap the case and put a helicoil in, but this could've been avoided if I used a torque wrench. Its a good investment

Nice video, i haven't scrolled thrugh the comments but the main drainplug are 21mm,not 22mm. So no one jack their plug up.. I have a - 16 raptor. 😁 Love your vidd man, keep em up🙂👍

@Motoposh

4 жыл бұрын

You are correct haha. Thanks!

This the same process for all years? mine is a 2008

If you don't have an appropriate size allen key wrench, you can use a torque bit on an allen hex head with no issues at all. By my experience torques are a tighter fit in allen hex head. Prevents stripping.

@coriereynolds4145

Жыл бұрын

Torx

Question, so you use same engine oil, for the case?

Good video thanks 😊 👍

I wonder, if you removed the drain pug before you removed the radiator cap if you would avoid the mess with vacuum holding the coolant until you cracked the radiator cap. It would drain quicker with drain plug all the way out... Nice job.

what is with the air inside ??? this must be out ,,

What happens if you over fill the case

How much time needed to warm up?

How many litres do I put in I’m in England so don’t understand quarts 👍

Remove the oil filter first , then do the tank, then the case. Drain them with the oil filter cover off, it'll drain faster and get more gunk out. If all you do is pull a plug your draining in a vacuum condition, pull the oil filter first you break that vacuum.

Good thorough process! I think you can go "every other oil change" on the oil filter. Is that correct?? I pickup my new '21 Raptor 700R-SE in few wks when it arrives (Covid backordered!). I've ordered some oil filters ..k&n , twin air. Looking @Yamalube 10w40 Full synthetic or Motul 300V full synthetic. Prob go w/ Yamalube! Castrol Power 4T full synthetic gets excellent ratings & its 10.99qt! Better deals on full case.

@Ryan-hp6xt

2 жыл бұрын

You probably could, but for a $6 fram filter, I'll change it every time anyways. Probably wouldn't cause an issue, but not a risk I'd ever want to take to save $6.

Super helpful other than my case was a 21 mm. Now I have a 22 mm just in case I need it tho.. Lol

Does the filter fit for a 2022 raptor 700

Great video

my yearly go to video😂

My 2020 raptor 700r I put a quart in the crank and a quart in the reservoir. That make a difference?

@willjennings983

3 жыл бұрын

I have the same four wheeler as you. I did his method where I put 18oz in the case and then a full quart and a half in the oil res and I’m reading inanely low oil. Did that happen to you by chance?

It’s two quarts for the whole quad right ?

How much oil you put in oil tank and in crankcase ? I have a 2010 yamaha model

@Motoposh

5 жыл бұрын

about 1.5L in oil tank and 0.6 ~ish in case

You should check the oil level again after the oil has circulated for 10 seconds

Hey man looking for some guidance, I understand the crankcase has a crush washer that needs replacing, is that a M14 size? Also the oil tank, idk if this washer needs replacing as well but if so, is that a regular washer or crush washer and what size is that? Thanks in advance

@Motoposh

4 жыл бұрын

M14 is the correct size yes. The oil tank bolt does not have a washer that needs replacing. -Josh

@eric89q

4 жыл бұрын

MotoPosh thanks bro!

Did you forget about the air bleed on top of the filter cover?

@Darrenbrown09

3 жыл бұрын

Does it help alot?

Thanks man , now ,I don't have to pay, I do it by myself

Just did an oil change on an ‘07, after it ran for a few minutes it was way down low. Do I add more oil once I’ve ran it or do I leave it alone?

@Motoposh

4 жыл бұрын

How much oil did you add to the case and tank? If you added 2 quarts total then leave it alone

Good morning clutch cover side oil how many litres and oil cooler place how many litres

@Motoposh

6 жыл бұрын

It's all the same oil. It's a wet clutch (uses the engine oil) and the oil tank overflow gets about 1.25 quarts

I don't understand why there is a need to drain and fill in two places. Wouldn't you just drain from the lowest point, then do filter, then fill from one place?

rotella 15-40 works great and u can change it more often because its cheaper and keep fresh oil in it.i use it on my trx 450r

@anneryan4264

6 жыл бұрын

cody beer the motor has a 20 year warranty if you use yamalube.

@buffalobmf

4 жыл бұрын

Use recommended oil man😂 never had anything using rotella run 100% good

@oscarpallaresmedia21

4 жыл бұрын

I used Rotella in all my trucks, haven't use it on my quad nor motorcycle.

How to remove all of the case oil? And how to be sure it is removed?

@buffalobmf

4 жыл бұрын

Yasin Doğan open up the engine get brake cleaner and a rag

Thanks

Heyy I have a 2017 Yamaha Raptor 700R and I was doing an oil change and I have a question, when I was taking off the bolt to drain the oil from the oil tank and when I took off the bolt there was no washer on the bolt, is there supposed to be a washer? Thanks.

@Motoposh

5 жыл бұрын

Just reread what you wrote. And no - I'm pretty sure there is not supposed to be a washer on the oil tank bolt. Just the case one

@p.b.2023

5 жыл бұрын

I just changed the oil on an 06, and it has a washer on the oil tank bolt

All I have to say is thank you

"Once u oil the seal its just makes a better seal" - haha lol no man u oil the seals so they come off easier when replacing the filters again, oil makes a lubricated area and if u dont oil the seal its gonna glue on the engine surface

Weird that people all over youtube put oil in the engine? The genuine Yamaha manual below tells you to fill it from just the oil tank…… Install the crankcase engine oil drain bolt and the engine oil tank drain bolt, and then tighten them to the specified torques.Tightening torques:Crankcase engine oil drain bolt:23 Nm (2.3 m·kgf, 16.6 ft·lbf)Engine oil tank drain bolt:19 Nm (1.9 m·kgf, 13.7 ft·lbf)12. Install the engine oil filler cap, and then tightenit to the specified torque.Tightening torque:Engine oil filler cap:12 Nm (1.2 m·kgf,8.7 ft·lbf)13. Pour only 1.3 L (1.37 US qt, 1.16 Imp.qt) of thespecified amount of the recommended engineoil through the engine oil tank filler hole, and then install and tighten the oil tank filler cap.14. Start the engine, rev it several times, and thenturn it off.15. Remove the engine oil tank filler cap, and thengradually fill the oil tank with the remaining oil quantity while regularly checking the oil level on the dipstick. Recommended oil:See page 10-1.Oil quantity:Without oil filter element replacement:1.75 L (1.85 US qt) (1.54 Imp.qt)With oil filter element replacement:1.85 L (1.96 US qt) (1.63 Imp.qt)

Hi I wanted to ask a question and I’m hoping u can answere me I have a raptor and I don’t know what kind of oil it contains and if I mix it with another type of oil is it okayy ??

@Motoposh

4 жыл бұрын

I use semi-synthetic 10w-50. You can use a different oil if you'd like, But make sure it's an oil that is meant for wet clutches. Theres plenty of oil out there that are, it's just important you use one that has the correct additives. I wouldn't reccomend mixing oils

@thethiefonthecross9092

3 жыл бұрын

Not using the right oil will eventually shorten the life of your ATV maybe not by a lot but it will shorten it some well that's what I was told LOL

So lil over half in the case then one quart and a half in the tank

What about starting it and filling the filter housing?

@endamccabe8895

4 жыл бұрын

And open the small air bleed plug On top of filter cover

What kind of tires do you run on your raptor street tire and what brand thanks.

@Motoposh

2 жыл бұрын

Duro Scorchers

Would it be the same process for a 2007 raptor 700?

@Tomas15555

3 жыл бұрын

Yes the same thing

Between how many hours do you change your oil I bought a raptor in February and did an oil change right now I have less than 15 hours on it I don’t right that often maybe a couple times a month Thanks

@Motoposh

4 жыл бұрын

I change it probably every 20-25 hours. Or twice a year

Dude my oil is not full and no it’s not leaking where do I fill it up at

@Motoposh

5 жыл бұрын

The silver oil tank. Your engine will pull oil from your tank when its running

Big one is 21mm not 22

Good video

Hows ot holding up? Had mine for 3 years

How often do you change the oil

@epuenties

2 жыл бұрын

Depends how hard you ride i hit the trails for about 3-4 hours i do oil changes every 3 rides

Where did you get the info on how much oil to add into the crank case ? Thanks

@Motoposh

4 жыл бұрын

The manual

@User37621

4 жыл бұрын

MotoPosh Thanks I found it and gonna follow that. You have guys saying put a full quart in the case but I won’t.

@Motoposh

4 жыл бұрын

Sounds good, yeah I've always added a little over half a quart to crackcase. 1.5 ish to the overflow tank 👍

My 2020 manual says to pour 1.37 qts oil in the oil tank start engine rev a couple of times then turn off then add remaining oil to the tank total amount 1.96qts seems kinda scary not to have oil in engine at start

@Motoposh

3 жыл бұрын

Yeahhh I would feel the same. I always add like 0.6 qts to the case

@tomjarels5732

3 жыл бұрын

@@Motoposh I did the same as you, I feel more comfortable with some oil in the engine. Thanks for your video, enjoy the day

What happens if you put in too much oil in both the case and tank? Would it burn off?

@Motoposh

5 жыл бұрын

Yes. Too much oil and you will have "blow-by"... the oil pressure in your case will be too high and will start blowing through your piston rings and eventually that will ruin your engine. Very important you do not overfill. A little too much won't hurt but an entire extra quart would be bad.

@TikTakTartz

5 жыл бұрын

@@Motoposh cheers mate. Thought that was the case but just double checking . Merry Christmas and all the best for new year

Thanks you I did exactly how you explained.

After what time should i change the oil i got a raptor 700r se 2019 Could you guide me on when to change oil...

@ahmedalshamsi1723

5 жыл бұрын

Should i replace the oil filter when i change the oil

@josepedroza8248

5 жыл бұрын

Yes, always change the filter when changing oil

@Motoposh

5 жыл бұрын

Congrats on the new Raptor! I would do your first oil change after 10-15 hours of ride time. After you do your first oil change you're okay to change it less frequently depending on what conditions you ride it. If you ride in sand or dirt it's always better to change it more often. And yes change the filter whenever you change the oil!

how to check the condition of the oil in the engine?

@sdc1233

3 жыл бұрын

Use the dipstick

Can you put SAE 10W30 in it?

@Motoposh

6 жыл бұрын

You can yes, they aren't that fussy. Personally I'd try and find some synthetic oil, 10w40 or what I use 20w50. You'll be fine using what you have though

I did that on my Yamaha Moto 4 250

Hi , i m nathan and i have a problem if you want to help me ,i have an yamaha raptor 700 and my blower assy doesn t work , is it a problem if I go with him like that?

@Motoposh

5 жыл бұрын

What is a blower assy

@Farcasstudio2000

5 жыл бұрын

I mean , radiator fan

@Motoposh

5 жыл бұрын

Ah. I would definitely get it fixed sooner rather than later. But it depends what kind of riding you're doing and the weather. My fan only turns on if I'm trail riding slow or on 90° days in traffic. I'd say you're okay to ride it as long as you stay moving and dont ride too hard.

@Farcasstudio2000

5 жыл бұрын

Yeah , thank you for this :)you helped me

@lukehusky2493

4 жыл бұрын

Rad fans are about $180 (CAD) from your local dealer

I just bought a raptor 700 yesterday. I feel like there’s a lot of maintenance involved. Do you have a single video that walks through all the must do maintenance look overs. How many hours for each ?

@Motoposh

4 жыл бұрын

Theres really not a lot of maintenance for these machines. As long as you change your oil, check your valves and change your coolant they run a real long time. Maintenance on a yfz is more involved

@GoBengals

4 жыл бұрын

Could you do a video on all that ? I have a 2020 Yamaha Raptor 700 ? Just want to make sure I keep her running. Only has 45 minutes of running time !

@thethiefonthecross9092

3 жыл бұрын

A lot of maintenance? It's not a lot of Maintenance it is normal maintenance like most ATVs

@thethiefonthecross9092

3 жыл бұрын

@@GoBengals oh yeah and just watch his videos if you want to see how to do things on it I'm pretty sure he has a video list with everything you'll need to learn and see

@Ryan-hp6xt

2 жыл бұрын

If you think a Raptor 700 is a lot of maintenance, go buy an RZR SxS and ride it for 3 years, then go back to a raptor 700... You'll be screaming for joy that you don't have ujoints, complex roll pins, wheel bearings, etc etc to maintain. Maintaining an ATV is fairly straight forward whereas a sxs uses more time for maintenance than it does riding... I left atv's, went to sxs's and now I'm back to atvs and I'm soo much happier lol.

What about the spark plug, do you change it when you change the oil?

@Motoposh

4 жыл бұрын

Every other time

only bel-ray thumper 10w-50/60 full synthetic ,very good oil to raptor 700, gearbox works better on this oil

@Motoposh

7 жыл бұрын

+raptor 700 Studio TV Thanks for the input, I assume you've felt a difference?

how often do you guys think it needs serviced ?

@Motoposh

3 жыл бұрын

Depends how hard you ride and your riding conditions. If you ride sand you'll need to change your oil a lot more than if you ride pavement

Does this change the oil in clutch and gearbox?? Please answer

@Motoposh

6 жыл бұрын

Yes, it's all the same oil in the Raptor 700.

@connorm02

6 жыл бұрын

MotoPosh ight thanks

First you said 12 mm then 22 mm socket ?

@Motoposh

4 жыл бұрын

There are 2 oil drains.

In my opinion the blends are not worth the extra money just go to a full Synthetic like Red line, AMSOIL or even Ryalpurple as they use tier 5 base oils.

@Motoposh

7 жыл бұрын

+FunBoyzOffroad I agree, that's my intention but I had a quart of the yamalube left over. What do you run?

@awsmfun

7 жыл бұрын

AMSOIL ATV/UTV 10w-40 with a Wix filter.

@Motoposh

6 жыл бұрын

Yessir

@Motoposh

6 жыл бұрын

Not necessarily, depending on the temperature/season you're riding in you'll want to get that appropriate weight of oil. Here's what I would run if I was to go with Royal Purple.. amzn.to/2GBbl7W

@Motoposh

6 жыл бұрын

For sure man, ride safe!

Tilt bike to the side when draining filter housing

Damn always taken my raptor to ride now and a shop I thought I could trust but they messed up my bottom drain bolt it was really hard to take out and put it in was werid as well I flipped the bike over and the threes didn’t look good I’m kinda sad man never touched that bolt and the skid pan was full of residue drip oil don’t take ur stuff to ride now

@Ryan-hp6xt

2 жыл бұрын

They make a reducer adaptor for when they need rethreaded, it'll reduce the size of the bolt and give you stronger threads to make it less likely to happen again. Basically the reducer becomes permanent and then you have steel threads on the reducer instead of aluminum.

@viijunioriiv8512

2 жыл бұрын

@@Ryan-hp6xt yea idk what happened to the steel but it just didn’t seat well idk poor job. Ended up using the old rubber boot with the bolt worked wonder not as big of a headache