Amazing construction technology. How do they get everything to just float into place like that?

I'm detecting a failure you guys need a solid concrete crown or ring on top of block walls before start all that process tks

Be sure to include the web stiffeners at the top flange hangers.

good job I think these materials are very expensive

This method is only any good if the bricklayers are spot on,and thats asking alot.

Only looking at this because I live on a second floor and wanted to see the build process..only hope is now hope it doesn't collapse.

@SagarJha3

4 жыл бұрын

Let me know if you need help with the layouts

Nice. But... In Colombia where can I get that kind of building elements?

The joists hang off the cinder block wall? No thanks!

I agree in a matter of seconds everything will burn flat

tengo un salón de 5M de ancho por 7M de Largo, se puede hacer un entrepiso sin columnas en el centro, para que quede el salón libre debajo y pueda habitar arriba

is it available in India

no audio no explanation on how to subsystem work!!!

It is a "rapid floor" in the sence that the floor can be loaded without the need for 3 courses of cured blockwork above the hangers. This is due to the design of the RBJH joist hanger.

@Kino162

5 жыл бұрын

Do you have a distributor in Mexico? Contact me 5512939892

I see red bricks in the block and what are those for?

Hi guys i need help please. anyone has any idea what is the last layer he installed on top of the beam joists 3:05 ??

@ITWConstructionProductsOffsite

7 жыл бұрын

Hey Talal, have a chat with our Technical Support team on +44 (0)1592 777570. They will be able to help you out.

@brianteed7390

6 жыл бұрын

Looks like standard tongue & groove osb.

You will pay as much for the hardware as you would if you went with lumber. Im also reading and hearing that these I joists (which really are nice to work with dont hold up against mold and mildew as raw lumber does. We are over engineering. Price out this flr then price it w lumber.

@robertweekley5926

5 жыл бұрын

Koogle You - Also, parts Hanging, loaded in Shear, instead of Compression, and while Shear may be better a loading than Bending, I doubt it is better than Compression!

good video

cool bild floor

If the joists sat on a foundation ledge and the brackets were there to tie to the outer edges, maybe but those brackets could never support the weight of the floor by themselves. Now, if this was a fancy deck, yes

@zozoart

Жыл бұрын

How do you figure those hangers could not support the weight of the floor?

@DevilTravels

Жыл бұрын

​@@zozoart granted, for short run floor joists, they could handle a light load, but it's always best if a floor joist is set on top of a more substance surface to carry the weight. And then there's the long term effects, since metal that thing can rust or oxidize over time and lose strength. Actually, these hangers might work really well for a tiny house build.

Hi there! Thanks for your comments. Please feel free to direct any questions to our Cullen Technical Support team on +44(0)1592 777570 who will be more than happy to help.

@op3129

4 жыл бұрын

how is this different from steico?

@faizmuhamad9683

4 жыл бұрын

Hy. Can u please mention what software did u use for this animation

What happens when the metals rust out?

@Dr23rippa

4 жыл бұрын

What goes up quick must be shit

@lulolee5325

4 жыл бұрын

Expensive renovation, mortgages etc... that's what world bank governments pushing to achieve.

@Mr1Pav

4 жыл бұрын

Modern day crap. Just like everything else.

Wood? I want bamboo!

I bet those hangers cost much more than a typical 2x8 plate. Also you loose 8 inches on each side of the house if you set the walls on top of the joists like you are supposed to. Just not a very well thought idea.

@ITWConstructionProductsOffsite

8 жыл бұрын

+bluebird5100 - This masonry hanger detail is a typical construction type used in the UK, with the rapid build hanger give additional safety benefits over other methods. For further details please refer to UK construction details.

ang galing

شكرآجزيلآ

Good construction 👍

This is the kind of floors that end up getting firefighters hurt or worse.

Hoy se puede resolver de manera más rápida, se silla y económica

Donde consigo esos conectores?

@alexalfaro9994

3 жыл бұрын

Where can I find this hangers. Pregúntale así y quizás te respondan

Los elementos metalicos que soportan las vigas, estan fijados a bloques de concreto, los cuales no estan diseñados para resistir la carga del piso, por lo cual es irreal el diseño. Si tuviera una viga corrida en las paredes, entonces si sería correcto el anclaje de las vigas que soportaran el piso....por favor corrijan ese horror (error) de diseño. Gracias.

construccion casas work

what software for creating this type of video? anyone?

@WendysAnime

3 жыл бұрын

Pretty much any 3d modeling software, I suggest Blender being making this wouldn't take ages to setup

Just make the 8cm more longer, then you dont needd the expensive steeel hook.. plus more strenght to hold the weight

@gregvisioninfosoft

3 жыл бұрын

Can you explain this better to someone who is new to this method? When you say the '8cm more longer' what do you mean? Thanks. Have you actually used this method? How expensive are these supportive joists?

@susetyoediprabowo3681

3 жыл бұрын

@@gregvisioninfosoft when you cut the wood more longer..so it can sit firm on the wall.. you dont need the hook anymore.. 8cm was only base on the average width of the brick that i knew.. it 8cm wide.. you can put the edge of bar in the middle of the brick.. on both side.. left and right.. thats why you need more 8cm length extension.. it may be vary depends on the size of brick you used.. but it only option you can pick.. choose what you prefer..

@gregvisioninfosoft

3 жыл бұрын

@@susetyoediprabowo3681 in this example, notice there is both cinder block and an exterior brick layer also. if the beams extended from cinder block to cinder block (eg: the old fashioned way). it is only because there is an exterior brick layer that would prevent rain from damaging the ends of the beam, that your suggestion could work. but what if ther e is ONLY cinder block wall - and no exterior protection from rain or moisture? can one use a weatherproof outer insulation? I am very interested to lern the viable options...

@susetyoediprabowo3681

3 жыл бұрын

@@gregvisioninfosoft thats what we indonesian used to do.. as i said it is option.. a lot of builder here did this.. cause we covered the wall with cement from outside to protect from the rain.. this way might be seem traditional or backward.. but I dont want to use that hook only to look modern.. while there is other easyest,simple cheaper way ..

@susetyoediprabowo3681

3 жыл бұрын

@@gregvisioninfosoft i also have doubted ..about the strength of that hook... For how long that hook could last holding that beam ??.. could it fight corrosion process ??

This should be labeled how to use as many brackets as possible. I would rather have room in my walls for the little things like Electric, Plumbing, and h v a c

I would not recommend that because of accessories having no abality to tolerate too much weight and surprisingly 😅 u showing second floor too is that a joke

Those concern they sell fireproof paint for about 325 bucks 5 ga

apa itu, apa ga ada vidioyg bhs indonesia

NOT FOR ME , THANKS

@gatiscelms6529

4 жыл бұрын

cool

I wish they could use steel I joist ,

👍👍👍👍👍👍👍👍

👍👍👍👍👍👍

A lot of work and expense. Just use a top plate and anchor bolts and set joist on it. Your floor sheeting will stiffen the top and add bottom web stiffeners.

good

if the blocks had openings , joyses can rest directly on top the blocks . to avoid any extra metal braces and supports . construction should be simple , solid , and 100% secure . don't mix science with construction

Good

All that weight supported by brackets

Mucha vara, mucho proceso

what type of program are you using

@asensenjaya6006

5 жыл бұрын

Tffo.

@mirzausama7026

5 жыл бұрын

@@asensenjaya6006what is Full name

Osb joists? Ohh man... We have come so low. Next time it will be cardboard flooring

@ITWConstructionProductsOffsite

8 жыл бұрын

+Kolocho DelRio - OSB web joist are a common method of joists in UK and have been used in UK, North America and mainland Europe for many years. These offer many advantages over traditional solid timber joists. For further information please contact engineered joist manufacturers in your area.

@kolochodelrio1234

8 жыл бұрын

+ITW Construction Products no thank you. I'm good

@cameriqueTV

7 жыл бұрын

Not in a fire, they don't.

@robertweekley5926

5 жыл бұрын

@grumpy old fart - OSB has a structure of Short Grain, Random Orientation, Wood, whereas Plywoods are Long Grain Veniers, of about similar thickness. I would select Plywood, of at least 5 Ply, if not 7 ply, for replacement of the OSB I-Beam Riser. Plywood could be even stronger, by adding 2 Cores at the 45° x 45° Orientation, in the Center, followed by the 0° & 90° Orientation, of typical Plywood!

Me neither , looks expensive , and a pain in the Ars

This is just a sales video for stamped aluminium.

or, you drop prestressed concrete hollow core slabs on it, put on some netting and forms and pour a concrete pressure layer on it. you know, like a proper floor....

guvenilir ve dayanikli deyil ve goz boyama

Pourquoi faire simple quand on peut faire compliqué...

1:31 So the weight of my house rest with 5 screws!

So you are using 4 inch block for a bearing wall ? Seriously

Problem: These flake board floor joist will burn like match sticks under fire. Even the glue is a accelerant. No one in their right mind would live in a house that has sub floors made of these particle board light weight fast floor joist. Fast burning is the problem! Just ask any fireman.

@johnmason1239

9 жыл бұрын

dave Drolett yes needs better floor boards, maybe firepproof paint en.wikipedia.org/wiki/Intumescent#Applications or aluminized sheet around those boards to trap thermal heat& stop fire, but latter would be pricey

@epistte

8 жыл бұрын

+dave Drolett Those joists are nicknamed widwomakers by fire departments for a reason. You need to interspace them with dimensional lumber for fire safety. Even a small fire is a complete teardown. I like wooden floor trusses instead.

@deezynar

7 жыл бұрын

Do you know how much damage fire departments have done to the quality of life in the U.S.? Are you even aware that they do damage?

@g3110

6 жыл бұрын

Problem is there already using that material everywere to save money and osb sheets for floor nothing new

@mrlover4310

6 жыл бұрын

It looks dangerous

Lots off expensive brackets

Đai giữ phải chắc

useless bracket holders ---easier to just put the beam on top of the wall

@hooddiee

7 жыл бұрын

agreed...

@rodom.8753

7 жыл бұрын

agree - do not use things that you don't need

@scottnoble5320

6 жыл бұрын

Not unless you continue building the exterior wall of blocks further up.

@g3110

6 жыл бұрын

Defenetly agree.people just love to make shit more difficult if it's worked for hundreds of years y change it and make it way more expensive and longer to install witch means more money

@fjkong9924

6 жыл бұрын

100% agreed and thousand times stronger then these brackets

Metro-Goldwyn Meyer 😂

Rapid? Mein Arsch es ist Rapid :-)

OSB floor? Formaldehyde, no thanks.

@lovefor6ofthem

4 жыл бұрын

Advantech is some of the best flooring you can use. And it's basically OSB with a water proofing

Exelent

Doesn’t look solid to me

It’s trash, and the cost of quality materials produces a quality job. Osb is a low cost filler material that is laminated and has no resistance to moisture and breaks very easy. This will never last a 30 year mortgage.

That's not rappid that's more work lots of hardware

Prefer to have it old fashioned way where real treated timber floor joists tuck into the sockets in the brick wall. Been that way for many years and works. Them hook plates and special beams look expensive. Good graphics but no notes or explanation so it won't sell much as far as I'm concerned 👎

sino t arrepientes d tus pecados t lanzara al lago d fuego salva t alma n t ballas al infierno

Ribet

Not good idea

This is why new builds are shit