Agree with 90% of everything you say. Except for the fact that Snap-On is the best aftermarket scan tool. That I would have to disagree on. They are the most expensive but certainly not the best. I would put it head to head with a Launch or Autel any day. Having used all 3 I know for a fact that the Snap-On struggles a lot and has a lot of gaps. Even scope wise it is really behind the ball unfortunately. As far as shop location, I really think that depends. I believe it is more based off reputation and quality. Example: my shop is in the middle of nowhere yet I am booked 3 weeks out and often have a waiting list and it has been that way for over 10 years. Any how good rant and keep on killin that flat rate! Take care. -Eric O.

@ReaperYouGames

7 жыл бұрын

Eric O. in the HOUSE!! Everyone listen to Eric as he is the man with the plan. Everybody should check out his channel as he is the best mechanic on KZread.

@JUSTINSTURGILLTRUCKING

7 жыл бұрын

South Main Auto Repair Erico your shop is busy strictly because you're a bad ass and you know exactly what the fuck you're doing you could be anywhere in the United States and people would be lined up for it to have you fix their cars just my opinion so with me location doesn't really matter if you're good people will travel and they will pay their bill because they're probably going to need you again at some point

@Leekautorepair

7 жыл бұрын

South Main Auto Repair Wow 3 weeks booked? Need a hand?

@SouthMainAuto

7 жыл бұрын

Leekautorepair could use about 3! Wonder if tim is busy haha

@JUSTINSTURGILLTRUCKING

7 жыл бұрын

South Main Auto Repair he's probably busy he's probably working on like banned 9 10 and 11 you know the last couple days the people found out is bullshit so I'm sure the banned list is getting pretty big

I spend $300 on Jordan shoes. But i wouldnt spend $300 on a wrench set. But in now way would i ever talk crap about someone with a tool truck in their yard. When i see a Snap On truck in someones yard i get hulk green with envy. Just a tip of the cap to them. Always cool to see people take pride in their stuff. Some people spend up on shoes, some on tools, and some on fancy $200 dinners. The ones complaining all the time are the people who dont have any passions or money in life to follow those passions. I wouldnt buy a snap on set but i will sure as hell admire one.

@goinhot9133

5 жыл бұрын

See I’m 24 always wore Jordan shoes and socks my whole life ❤️ Them. Now I can’t get myself to spend money on shoes I want $300 wrench sets 😍 my wife loves snap on so , I’m in their!

@ghostwrench2292

4 жыл бұрын

@Jeniy Cresava - good point. I wear 1 pair of sandals that are 5+ years old and my wife buys my clothes. My toolbox cost as much as a car and I’m continuously buying tools off the tool trucks. I couldn’t care less about my street shoes & clothes (I buy good work shoes) but I never hesitate if there’s a new tool I want or need. I don’t even my car detailing supplies for the weekends. I spend more and have a much larger variety of car detailing supplies than I have to clean & groom myself! 😂

@eliezerramosjr1017

3 жыл бұрын

@@goinhot9133 way to go brother, I was the same years ago but now I have drove my wife crazy and probably soon myself out the house. Over 15k in tools at home alone and still growing. It becomes a addiction but I tell her don’t look at it as a purchase but an investment. Tell you what I or anyone I know will never be walking again. I know for past decade I or my wife hasn’t. Great job though keep it up brother. God bless you always

@goinhot9133

3 жыл бұрын

@@eliezerramosjr1017 lol that’s funny, I’m pretty sure I’m at 15-20k in just SO in the last year or so, but recently I’ve been focusing on firearms lol

@sydneykillian3685

Ай бұрын

We buy quality everything, and our philosophy is can the higher quality make you money? Jordan’s can if you get a limited release. But tools, and appliances, can make and save you money. Cheap is expensive.

LOL, People sure to get upset on each side when it comes to tool truck. To me it's about making a smart choice for you and your needs. I do worry about guys getting themselves in to a stupid amount of debt buying tools that they don't "NEED". I have also seen guys fresh out of school with thousands of dollars of tools. Then they spend a year in the field and leave it. Its kinda sad. When it comes down to it, buy what you want. It's your money LOL! I own a mix of everything Truck, Ebay, HF, Amazon, etc..

@flatratemaster

7 жыл бұрын

Charles, I also worry about especially young techs getting into to much debt, I did a tools to start out as a tech video, a while ago, I said in the video do not buy off the tool truck starting out, too many people get into this trade and leave with huge debts to the trucks, in that video, I stated to buy a HF tool box/cart, gearwrench and VIM. FYI, one of my very first videos on this channel was managing money on flat rate, please do not go watch it, really bad, info is good, I think, but audio and video is not. I started this channel specifically to help young techs getting into this business, knowing full well this would be a small niche channel, and hope my videos will help these techs, grow and develop.

@HumbleMechanic

6 жыл бұрын

Rock on dude. I have very much the same mission, at least in part. Keep making good vids man

@flatratemaster

6 жыл бұрын

I will keep making videos, I keep hearing from techs that my videos help them, and that is what matters! Don't forget you get back to ATL, beer is are on me:) FYI I have been a Sub of yours since you had around 5 or 6k subs on my personal channel, you keep rocking those great videos too!

@drphil5364

6 жыл бұрын

HumbleMechanic ur awesome

@meanodustino9563

3 жыл бұрын

Yup I did get a bit deep into doo doo but getting out. Looking back at what i did buy...i am glad that I got what i did and my snapon dealer said he would take back some tools and really glad because I do return what I haven’t used.

Love your videos, A few months ago I asked you if a 38 year old could start in a automotive industry, and you said y not. I have now 4 months in now and I'm doing head gasket and engine swaps, and I have spend over 1000 dollars in tools. And let me tell you...... I love it!!!...

@flatratemaster

7 жыл бұрын

Awesome!

@luckymeziere3675

Жыл бұрын

How is it now

Tool truck envy is huge. I see it and here it all the time. I just say it's my money ill spend it the way i want.

@flatratemaster

7 жыл бұрын

Yes it is!

@ifitsnotbrokenfixit1193

2 жыл бұрын

@Sid The sloth I have seen that as well. I have also seen that cheap tools makes the job harder. Rounding and stripping the fasteners. Because they spread, the broaching was bad. Or just crap steel. And if one is looking for good deals on tools. Don't forget about pawn shops,farmers auctions,and estate sales.

@ifitsnotbrokenfixit1193

2 жыл бұрын

@Sid The sloth I don't make fun of the guys that have Husky, Kobolt,Craftsman tools. They work as they are intended to. The people who I have a issue with are the one's that say. That all you need are the low end low quality tools. Now i do have some cheaper tools and only broke one. A 30mm my fault i couldn't get the box end on it. And had to get to 500ft lbs. I agree with you on using ones tools as they are designed. Putting a 4" cheater bar on a 3/8" and getting mad when it breaks.

@ifitsnotbrokenfixit1193

2 жыл бұрын

@Sid The sloth I totally understand where you are coming from. My slant comes from a certain segment saying that all one needs is HF tools. And nothing more.

@ifitsnotbrokenfixit1193

2 жыл бұрын

@Sid The sloth i have and still use HF 1/2c impact sockets. They are now in my service call bags. Because if i loose one or i drop them in mud im not out much. My problem is HF,lows, Menards are 20 minutes away. And my time is very limited. Now NAPA, will deliver the local hardware store has chanelock but the price point on them is a little steep. I have HF screwdrivers they are ok. They are loaners now.

Let them hate. I'm glad for you. I can't afford them right now but happy for the ones that can.

thanx... keep it up with all this info really helpfully im 24 in been on the diesel industry for 6 years

@flatratemaster

7 жыл бұрын

Thank you very much! and will do!

Great video as always. I never understood people that give you crap on where you by your tools, buy what you want. I do believe in buying quality over quantity, my Snap-On tools never let me down. Even after a rebuild on my air ratchet and 3/8 air gun after about three years of using everyday I didn't mind because of the service and it was pretty much a new toll after the rebuild. Also, alot depends on your tool truck rep, I have great tool rep that shows up every week and gives no problems when I need to warranty a tool. I also believe in local small business, money stays in the area to support other local businesses. Nice to see that you know when to stand back and not have the stress on owning a business and making enough to support your family and have savings.

@flatratemaster

7 жыл бұрын

Thank you very much! I do not get the tool truck hate! FYI the wife of our Matco Dealer came by the shop and gave us all Ice cream, a good dealer is the key, if my tool dealer sucks he isn't getting any money from me! Too easy for me to close the box at the end of the day and go home, spend time with my kids and smoke a nice cigar, than sit at a computer balancing the books or making sure I have enough cash on hand to cover the parts bills and payroll etc.

You make excellent points! Keep doing what you do - nothing gets the haters more wound up than success!

@flatratemaster

7 жыл бұрын

LOL!

I appreciate you Chanel & the rants, lol it’s always good to hear someone’s opinions and thoughts that have been in the industry for a while I’m guessing. To bad for all the haters giving u griff all y can do is just brush it off no point of getting mad.

Flat Rate Master: Outstanding videos! Thank you!

@flatratemaster

6 жыл бұрын

Thank you!

I live in Chicago and just like anywhere, a large spectrum of economies. I use to work across the street from a shop in the "hood", not a day would go by where I would see a bunch of gang bangers coming to F up the mechanic that ripped them off. I would see guys jump out with bats and mechanics fighting with anything they had. But in upper middle class shops also in Chicago, people come in and pay outrageous bills and not even break a sweat. They sit calmly with their phone and laptops and do their work. They pay without saying a word. If you get an occasional complaint, you won't see them showing up later with their "boys". Just yesterday they shot a mechanic in the hood trying to rob his shop.

I agree with the reflashing, people don't understand it. I work at a caterpillar equipment dealer. I run into that all the time. A machine will have a code and you do an update on the software it goes away. Before wasting hours of time troubleshooting something that isn't there

@flatratemaster

7 жыл бұрын

Thank you, some people still live in the dark ages on auto repair, and just do not get it.

Loved this video. Buy the best you can afford. I just buy whatever gives me that warm down fuzzy feeling.

You are soooo right on with this one and location and money doesn't seem to land in your lap at the same time unless your born with it. It would have to be one of those ideal situations or circumstances and sometimes once in a lifetime it can happen scenario. F.R.M. you're handling it in a very intelligent manner I must admit. Also it can be less headaches or lawsuits not owning your own shop.

when i was doing my training to be a mechanic i was disappointed that we had a 2hr module lesson on carburettor's,Thinking i was going to learn hell alot more about them, But since then i've only worked on 1 carburettored car and that was MINE! its crazy how fast automotive tech is moving, i was worried cause i did'nt know about certain old school precedures like connecting the light bulb to the diagnostic connector and counting how many times it blinks, If i could give advice to the new techs out there Don't look back, look forward cause possibilty that all the current tech could be obsolete in the future.

It's none of anybody's business what u buy. Good video ! 👍👍

@flatratemaster

7 жыл бұрын

Thanks Norman!

i agree with you, I just enjoy using snap on tools so that's what I have. I work my balls off so paying for them is no issue. i don't need a snap on box but it makes my day just a little bit better.

@flatratemaster

7 жыл бұрын

Wants vs needs;)

Good video man!! Let the haters hate, they are doing their job. I agree, big money in Buckhead! As a former Benz tech at the dealer their it was good money. I remember customers having their credit cards on file and them saying just to call if the repair bill goes over 10K!!! That’s why I’d rather work in a big city like Buckhead vs a small suburb, it’s apples and oranges. Anyway another great video man!!

@flatratemaster

6 жыл бұрын

The shop i am at is right down Piedmont from MB of Buckhead

Enjoy your videos thanks for taking time. I don't have any problem with tool truck if you have the money. Most people think they do but there weren't be so much tool truck stuff for sale on eBay...etc if they did. Where you get your tools is not the problem it is the way they are sold. Have a good day.

@flatratemaster

7 жыл бұрын

My very first video on this channel was about money management, if you are broke the day after pay day, you need to spend less, period!

Wow.....man you nailed it. This video was on point and the heat is real. Hater got to hate when your rolling big.

@flatratemaster

7 жыл бұрын

Thank you!

I am a home gamer and I admire your tools and boxes. You and Eric O and others are a great inspiration for me. Tool truck stuff is great but I can understand why other look elsewhere like I do. If I was in your or Eric O's boat I would operate differently.

@flatratemaster

6 жыл бұрын

+Anthony Scotellaro thank you! Yes home vs tech are very different needs. Fyi Eric O is a cool guy in real life too

Sounds like u and keith should touch tips behind the tool truck!

@gilbymdg9609

7 жыл бұрын

im guessing it means there bell ends and if you dont know what a bell end is google it. GP

@flatratemaster

7 жыл бұрын

He was doing a reflash on a Nissan as I was doing my live stream

lol thats funny the first thing u mention for reflashing is the nissan mafs!! ... love the videos! -Nissan tech

@flatratemaster

7 жыл бұрын

LOL, How many of those do you get in with a brand new aftermarket MAF on it;(

Like how you explained "location", basically in the hood or the good part of town lol. I always thought it was the main drag like you mentioned

@flatratemaster

6 жыл бұрын

Thank you

Plus plus plus lol so true. Love your videos man. Very helpful to me starting out on flate rate please keep them coming.

Man.... Love your stuff. Thanks.. Straight talk no BS Keep it coming. How do you get reflash in the aftermarket.

@flatratemaster

4 жыл бұрын

Go to l1diagnosticand programming channel here on youtube

Thanx for the video. ....haters will always hate..if u can afford that nice toolbox why not get it! Btw i like ur new box. keep up the great wrk bro

@flatratemaster

7 жыл бұрын

Thank you, haters gonna hate no matter what

That's an awesome tool box bro.

Love this dudes rants

You can buy preprogrammed modules for some vehicles at the dealership but they are more expensive. But it is beneficial to be able to program at your own shop

All valid points. I work on a lot of Mercedes and will say you can't hardly do anything without flashing. Also I work in Norcross so we're practically neighbors lol

@flatratemaster

7 жыл бұрын

MB is about the worst for that! Hey Neighbor!

great rant and video FM loved it

I love your videos im in GA to. Work as a Diesel Tech in Forest Park

@flatratemaster

6 жыл бұрын

Used to live on Tara Boulevard years ago

Techs and other folks that get their panties wadded up because of what you buy tells me they have too much free time. I'm in Law Enforcement and a long time automotive DIYer. My goal is completing my automotive course and doing automotive work on the side at the house and for something meaningful to do when I retire in a few years. I want to try and help owners of older vehicles keep theirs running just a little longer, because not everyone can afford a brand new car. Keep up the great work, FRM!

@bigg4454

7 жыл бұрын

+Donald Hollums - That's me right there, the guy that's the "older car" man helpin' folks who gotta hold on to that "hoopty" 'cause they don't have that newer car cash flow(or credit), but wanna (or need to) keep drivin' what they have. I'm behind the times like they are anyway. It's not uncommon for me to work on a "2000 something". I go back further than that too.

@charredskeleton

7 жыл бұрын

Big G I hear both you guys. I work industrial maintenance (mechanic not janitor). My drive way and over sized one car has become the last stop on the way to the junk yard for many machines. A few weekends ago I did an "alignment" with a tape mesure on the drive way. It isn't perfect and it will wear the tires but it stopped trying to kill the driver and tracks straight now. Good passed by a lot of vehicles a long time ago, ish is what they have now. It's strightish, runningish, drivingish, but getting back and forth to work.

@hobohacker258

7 жыл бұрын

What does you being in law enforcement have to do with anything???? Just bragging?

@flatratemaster

7 жыл бұрын

LOL!

Thanks for the honesty. Screw the haters

@flatratemaster

7 жыл бұрын

Thanks!

Caterpillar truck technician here (24 years). I have always told the young techs in our shop that when it comes to the tools that you use everyday, buy the good stuff like Snap On and such, but when it comes to the tools in the "bottom drawer of the box" that gets used once in a while, think 1 inch drive equipment, there is nothing wrong with the off brand as long as you feel that it is a quality built tool, or that you can easily replace. If you can justify it's expense, and you like the tool truck tool, then buy it! I have an Extreme 55 inch box that I LOVE! Would have bought the 72 inch box but I still have to be able to move the box once in a while in a busy shop. The tool truck boxes are really nice, but I'd rather use the money for the tools inside and the Extreme box is a BEAST when it comes to storage. Reflashing is an ABSOLUTE MUST if you are going to work on modern equipment. And I agree with not owning my own shop. There is a lot of money to be made in your own shop, but there is a lot of risk involved as well, and anyone that says that you can keep the equipment as collateral does not have any idea how big a pain in the ass it is to place the lien on the equipment, sell it, and hopefully make enough money to pay the bills that you owe on it (parts vendors, etc) and make a profit on it. I had a customer whom I did about $5000 dollars worth of work to, the customer comes in to pay the bill and gushes over how great a job it was, then writes a RUBBER CHECK to pay for it. At least by working for another shop, my paycheck comes every two weeks, and I also make buttloads of money without all of the headaches of the business!!

My chain shop has a good solution for flashing,. We have an “Area Diag Specialist” who has a van loaded with OE scan tools and J-box, and his job is to drive around servicing 22 locations performing flashes and bailing out parts-changers when they get comebacks. We bounce ideas off each other a lot, and the running joke is that he’s only holding my next job open for me until he retires.

Thanks for sharing !!

This one didn't disappoint!

@flatratemaster

7 жыл бұрын

Thanks, glad you enjoyed it!

Hi FRM, totally agree with you not to sound like a kiss ass but I’ve seen many of your videos...and you just speak the truth. I wrench as a Ford tech and many of these points are great whether people want to believe it or not. I moved down to North Carolina from New York and location is different in many ways, but no matter where you are at we all have slow and busy seasons. Either way you should be wise enough especially as a technician to save as much as you can in the busy season. ALSO a VERY good point you made...the reflash or we call them reprogram, either way it IS very important on these newer vehicles. We see many vehicles that are “repaired” at local or smaller shops that just kinda throw parts at it and yet many times don’t even know that vehicle needs to be reprogrammed after a repair is done. Thanks-Brian

forget about the haters FRM your one of the kings on youtube when it comes to automotive info enough said. GP

@flatratemaster

7 жыл бұрын

Thank you very much! It really doesn't bother me, but makes for a good rant video;)

I believe the data on a snap on. I can trust it. It may have gaps , but it has the feel of professional quality. Autel fills those gaps when needed. It’s a beautiful thing to have both.

I do the heavy line jobs so I bought snapon sockets and wrenches because I've broken alot of cheap tools over the years but people need to buy what they want and not worry about what someone else buys

I used to buy quite a bit off the Snap -On tool truck, including a tool box. Hard to beat the quality. But once I started not buying something every week, he quite coming around. Haven't seen him in 5-6 years. His loss. I still buy a few things from Snap On on-line and they're pretty good about covering any warranty (if a little slow).

@flatratemaster

7 жыл бұрын

Some times, tool dealers can't see the long term, others know the value of supporting customers over the long term

Great vid as always! I never owned and probably won't ever own a Snap On scanner, but I've used 'em in the past. Last time was when the Solus was the thing. That''ll show you how long I been out of this repair world. Back in the day I counted on the employer to take the dive and invest because I simply couldn't afford one of those. I was all I could do to get "the brick" on my own and when I finally did get one of those, it was on the way out. Now, after re-entering this field and do my own thing, I have 3 different scan tools. I mostly do older vehicles, so I haven't ran into any of that reflashing stuff yet. I know what to do if I do........wave, bye bye!

@flatratemaster

7 жыл бұрын

If you work on older cars, not much reflashes needed, but later model stuff, is way different

@bigg4454

7 жыл бұрын

I doubt if I'll encounter anything that requires a reflash will cross my path. Too rich for me. They'll need someone well versed it that area. Not me.

Great rant lol. I do think that just like you last video about buying part store vs internet there will be at some point a one stop shop for tools online with more affordable pricing. This might be a company that doesn't exist yet or a company Amazon buys but with the market is obviously ready for it.

@flatratemaster

7 жыл бұрын

Thanks!

I own my shop and buy almost everything from my snap On dealer and Mac dealer. I have great dealers and I can call them day or night to warranty a tool or have them bring one to me if I need it for a job. I understand I'm paying premium prices, but the aside from the quality I pay for the service and convenience. Especially when it comes to scan tools, a/c and other larger equipment I've always been satisfied and I believe the service I'm getting if I have an issue (which is rare), is well worth the extra $. I understand people confused why someone might pay 5-600 dollars for a set of wrenches, but do this profession for a while and you will quickly understand. I'm using tools today that I bought 20 years ago when I started and that says a lot. I know some people may not agree but if it's your $ I don't think there is anything stupid about spending it how you want. And if it's going to make my work and day easier and more efficient then I will continue to pay the premium for that. Great video as always!!!

@flatratemaster

7 жыл бұрын

I say all the time, I have very few tool needs, at this point in my life on am almost all tool wants, I want a tool, I can afford it I buy it. Thanks you !

Agreed, I hate when people give me crap because I buy off the tools trucks. I can afford it they can't because they spend their money else where. I just picked up a new tool cart from matco on promo for my b day on the 24th and first thing I heard was oh man buy the sunex online buy harbor freight cart. And my response was the same I wanted quality and something strong. Not knocking the lower brands either, but what I've found is there will always be ppl that don't agree and some are jealous they can't manage their money to buy the quality tools.

@flatratemaster

7 жыл бұрын

I do not get the hate, buy what you want and I will buy what I want, sorry if you cannot afford to get on the tool trucks I can:)

Keep it up flat rate master great video,s

Just bought the Matco comfort grip flex head 3/8 Ratchet off the truck $180 and a 3/8 SnapOn impact wrench $400 or something I love em also ordered Matco impact sockets 8-19mm no skips and it comes with SAE $260 I believe tool truck makes life easy buy here pay here type deal

Thumbs up on your video. Awesome info

Im a lil late to this video lol Bout 4 yrs. But your tool box is badass dude. Ppl will pick at anything. Dont feed the trolls. Your videos are awesome, and im learning alot. Salute.

Where I live there are no options for a tool truck. (As a DIY'er I do pretty good with eBay and flee markets). I'm searching for my first scope so this information along with Eric and keith are invaluable. Thanks.

@flatratemaster

7 жыл бұрын

Thanks!

I started my career at an independent shop where we mostly worked on early to mid-2000s cars I never realized until I started working at the dealer how many repairs were fixed by doing an ECM update or some type of reflash

@flatratemaster

7 жыл бұрын

LOL, yep the world it changing

Some modules you need to remove information stored in a module before you remove it so it can be installed in the new module. Such as diesel injector flow numbers.

I love all your rants lol, and you're toolbox and your channel lol keep it up

Well spoken brother!🤜🏻

@flatratemaster

7 жыл бұрын

Thank you!

love your channel man my day job is being a technician as well. also I used to live in GA and miss it. Work at Jim Ellis

@flatratemaster

4 жыл бұрын

What brand?

@rickwilliams9429

4 жыл бұрын

Flat Rate Master worked vw done there then moved back to Ohio went Audi then Porsche and Bentley... I now work at a Indy shop for better benefits

I definitely cant afford that kinda box but god damn it looks soooo good, I just got started in this I don't make a ton of money not only that I don't need that right now. As for you guys this has been your profession for years apon years, you want something nice and you need something that will last and be big enough for the huge amount of tools you have accumulated

I say u buy what u can afford and tbh if I could afford it all I'd have is snap on. Good video keep up the good work.

@flatratemaster

7 жыл бұрын

Thanks!

Very Valid Points thank you! For a DIY home garage type guy what a is a "good' reasonable priced scan tool you can recommend PLEASE? AND how to learn to use it I have an OBDII and volt ohm meters.

Haha good video keep them coming!

Good content.....struck some good points

@flatratemaster

7 жыл бұрын

Thanks!

Excellently put, most keyboard warriors are extremely jealous. Why wouldnt you buy of the tool truck, the warranty will be good. You know for sure that your buying a genuine product. Over here in the UK we are forever doing Ecu updates. But for the small minority who dont believe in these so called updates, simply do not have the knowledge do diagnose these vehicles correctly. They throw a tonne of parts at a car and hope it fixes it, on numerous occasions cars from other garages have brought cars to me, i simply follow diagnostic procedures to reveal the root cause. All i can say is screw the haters, get yourselves educated and dont get left behind. Keep the videos coming. Great video flat rate master

@flatratemaster

7 жыл бұрын

Thank you very much!

I like your box, I would not buy it myself but it is badass. I use 56" top and bottom from harbor frieght. It is deep enough (24") and decent quality.

@flatratemaster

6 жыл бұрын

Thank you

It's your life your money spend it how you see fit. Some guys buy from truck because it's there and they have a relationship with the vendors. The truck will take trades where other places don't, and sell nice used boxes to younger techs at a cheaper price. I think some just don't see both sides of the issue its their opinion and others don't matter. Real good advice and it's sad we have to go through this. The haters that is. Great vid thanks

@flatratemaster

7 жыл бұрын

I really just do not understand the hate, If I wanted a Ferrari and can afford it, why would you sit there and tell me it is a bad car to commute in, or that it gets poor gas mileage, or its over priced etc, its not my fault you can't afford one, and no I can't afford one either:( But the Same applies to buying off the tool truck

@johngibson3594

7 жыл бұрын

Flatrate Master I get it some don't it's your money spend it how you want. I feel like j.g. Wentworth

I have the cardaq m for reflashing and some various oem scanners for reflashing. The biggest thing for reflashing is make sure you have a steady power source. Some modules will corrupt if you dont and youll be out that money. Sucks on a bmw

@flatratemaster

7 жыл бұрын

BMW, is a power sucking machine on programming!!!

I didn't know you were in the ATL my friend. Was just in Gwinnett for training last week. I'll stop in and see you next time.

@flatratemaster

7 жыл бұрын

Come on by!

I Just Messing With you over Your Hat. I Buy Most All my Tools From MATCO. My Matco man Has Been Here since i started in 92.

@flatratemaster

7 жыл бұрын

LOL, I think the hat thing is just funny;)

Ya to much headache overhead and worry's I have loads of people said I should open a body shop but who wants that kind of stress

@flatratemaster

7 жыл бұрын

It sure can be!

@etchosts8162

5 жыл бұрын

danoh's toolbox not to mention people threatening you or putting a lawsuit on your ass! It’s happened to me.

Agree ... it's almost like the oem vs aftermarket parts debate. OEM in general is better, but will cost you more... In some cases .... nothing but OEM... some cases Aftermarket actually corrects oem problems.... Very dependent on individual situation and what you can afford...... but in some cases.... there's only OEM choice as aftermarket will burn you...

love is video very smart man everything you say is rite on the money

@flatratemaster

7 жыл бұрын

Thank you!

I get it, some of my tools have came from harbor freight some cornwell some snap on and some matco and Mac. Some stuff from harbor freight but some tools you have to have from a tool truck like a transmission extension or air tools I've had several air tools from harbor freight they were decent for a little while however I use power tools as much as I can so they saw alot I mean alot of use in the 3 months I got out of em..I have a mix some things I have came from wallmart spend money where you need it IE tools that make you more efficient.

Exactly. Hence why us dealer techs have so many cars come in more screwed up by independent shops that refuse to stay up to date with technology. The independents eventually won't be able to keep up if they don't start investing in proper tools and diagnostic equipment. Manufacturers are making these cars more and more "dealer dependent." Props to your team and all other indy's that are trying to stay up to date.

@flatratemaster

7 жыл бұрын

Thank you, I can't believe shops and techs will not stay up to date on this stuff, I quess would rather keep blinders on and hope it goes away, you know just like they did when ODB was coming

I just picked up a verus after trying launch, autel, mac scout witch sucked, and snap on solus and definatly like the snap on the most. Do agree it struggles with some euro stuff but I mostly work on Asian cars.

@flatratemaster

7 жыл бұрын

I like having options on scan tools, that is why I have both Snap On and Autel along with the factory tools the shop has:)

Great video! Talking tools is nice, but it's a good change of pace to just rant about industry things... things a lot of techs deal with on a daily basis. I also wanted had a couple comments: 1.) Isn't it amazing how everyone knows what's best for you? I work for "the man" too. I'm not a tech anymore. But same as you... I like the company, I like the work, I like the people I work with, I like my boss, and I sure do love the money I make. Our professions don't always define who we are. Anyone that wants to work 80+ hours a week, no "real" vacation, no "real" weekends, missing birthdays, missing weddings, never be able to leave the work at work, and get paid peanuts for the first 3-5 years (if you're lucky)... by all means, start your own business. There is nothing wrong with letting "the man" pay for you to live and retire comfortably! 2.) The "tool truck haters" discussion: I started working on cars when I was 21 or 22. I could REALLY not afford a lot of tool truck product. I bought a few things off the truck and spent the money where it was smart to. But the bulk of my tools were Craftsman and similar quality. This was 1996. Craftsman was made in the USA, with pretty stringent specs, and performed very well for a starting tech. I will never forget the guys with the $8,000+ tool chests (filled with tools of the same brand) that took every opportunity to tell me how I was wasting my money on crappy tools. I know you don't do that in your videos. But I do believe that is where some of the "haters" come from.

I love the revel x

I really like the videos. I have watched a bunch of your videos and didn't realize you work in buck head. I work for a independent shop in Roswell. Obviously you have been a tech for a while and have a lot of experience in the business. I was wondering if you could do a video about pay rates for technicians depending on there skill level. I'm not sure if you have a video like that already.

@flatratemaster

7 жыл бұрын

Pay rate is hard to do, simply because it varies soo much over the country, what I make in Buckhead, is going to be way different than lower Alabama. Cool to hear from someone else is the ATL:)

In 2016 I bought an Extreme Tools box, 30" deep, 72" triple bank. As a former SO KRL owner, I find this box every bit as good as a Masters series, though a little bland, and with only detents for drawer retention, and less than 1/3rd of the price. edit: lol, is that the brand you mentioned at 1:50?

I just bought a Matco roll cart. My boss has the harbor freight tool cart. There is a big difference in quality. My boss now wants a Matco one and then harbor freight one into diagnostic cart. Not sure why people hate on you for buying nice stuff.

That is a beautiful box. I'm a little jealous haha

Brother I need u to make a video please , about what kind of tools shops required to mechanic to start working , I just finished the school and u know they don’t talk anything about it

@flatratemaster

6 жыл бұрын

One of my early videos covers that topic tools to get started as an auto tech

This guy is awesome

Good job man

At the Honda dealer new cars when a electrical part is replaced in needs to be calibrated

@flatratemaster

6 жыл бұрын

+Brando2289 lol, lots of parts are no longer plug and play, but some people still live in the dark ages

I buy off the tool truck whole shop does even the manager. payment plan and lifetime warranty. I work in a transmission shop we see alot of reflashes and programming it is here. We are on the main drag in marietta

Generally most people don't hate on guys for buying from the tool truck due to being able to buy or not. But due to the arrogance the guys who buy them have. The tool polishers. The guys who look down on someone using 15 year old Craftsman sockets. But then I dislike the guys who swing their skill level ego around at those who know less. Assumption is always a jealousy issue when that is usually someone further stroking their ego. I just don't like dicks.

@flatratemaster

7 жыл бұрын

That is another side of the issue, yes there are way too many techs that will look down at a tech using a craftsman wrench, and I hate that BS too.

@asmautollc

7 жыл бұрын

ykmalachi yeah that's BS. Especially 15 year old Craftsman sockets. Nothing to be ashamed of!! All of my 3/8 are Craftsman except for a few odds and ends. Hell, the only 1/2 Chromes I own are 60 year old SK's I got from my uncle!! since mostly just use impacts.

If wanted to open your shop again, how much money would you need to start it and, how many years would it take you to, a least, be on financial level you are right now? Could elaborate on the issue of owning a shop?

The only thing i wish is i could have got that snap on belair he used to have. The new one is dope tho.

My dad's shop,do the GMs mostly for flashing and programing.Have the Tech 2 and the Tish program.AC Delco does have something online for $55.00 for 3 days just for programing.Had to use this online program for a 2008 Chevy truck to program the new fuel pump module that was installed.Even with the newer GM radios,programed with the Tech 2.Encounter a Chevy Trailblazer and GMC Envoy for a window switch replacement,the new window switch has to be programed.Does not work out of the box.I have been told the newer VWs and Audis,the computer has to be programed all over again after replacing the battery.Learned I am going to have a new Matco dealer.Matco pulled my previous dealer's southern route from him.Good thing is I don't owe any money to this dealer

@flatratemaster

7 жыл бұрын

Sucks about your Matco dealer!

@Toolaholic7

7 жыл бұрын

He has his northern route still.

I'm no mechanic, but I have a scan tool addiction. So I was trying to help this guy at work with his Nissan. Anyway you right about having flashing capabilities he in his 3rd pcm, and 2 cheap to buy 1 brand new. If I was dirty I could have took him for a ride. But I stayed honest and told him you just need the right computer. But he still doubts me. The pcm he has now is from a 2000, his car is a 2001 with different parts and he wondering why it doesn't work right lol. He gone be hurt if I start charging 😭😭😭

Good for you for being able to afford that tool box. That’s like the people that get mad at someone else buying a new Corvette. 🤷‍♂️. I think my biggest rant over the years has been the rest of my family “can you look at my car and see what’s wrong?” Or “can you put this part on that’s bad”. 🙄

I just like to see what the higher end techs spend their money on. Go get em Micheal.

@flatratemaster

7 жыл бұрын

LOL!

You earned every dime if your money spend as you please ignore the haters

Modern cars.😣 About a year ago, my son got out of the Army and came home. He saw an ad for a 5 speed Honda Accord, and he and I love manuals, so we went to go take a look at it. It was a trade in at a Mazda dealership. Well, the car LOOKED great, but it was leaking everything, etc. A money pit that some kid probably used for drifting, I'd guess. While there, I took a look at the vehicles in the show room. I thought to myself that I don't know if I'd even attempt to get to the alternator on those cars. I didn't know if I was pissed about not being able to go under the hood and do maintenance or if it was intimidating. Absolutely no room in the engine bay for my mitts.😐😁 I am gonna go back to my local Tech school and take some refresher courses. That's what it's come to now. There are some brake jobs that I can't do because of modules and things like that. Amazing.

@flatratemaster

7 жыл бұрын

Late model cars it is all about moving things to get the room you need, like it is now common place to have to remove a bumper cover just to do head lights, fun:(

I remember spending around 6 hours trying to diagnose a Nissan Versa with a MAF code that kept popping up even though everything was checking out fine. I don't remember the exact code because this was around 4 years ago, but it was really frustrating. It really throws you into a loop when you can't trust the software being written properly anymore.

@flatratemaster

6 жыл бұрын

+Dan.vaku p0101 we send many too the dealer for the flash update. We have gotten several that other shops have thrown MAFs at them. Sucks for me as we can't charge Diag, just read code and tell them to go to the dealer for the update

The 1 tool every cat mechanic should have off of the tool truck is the 16mm/18mm straight offset box wrench.

I agree with you tool box issue I think it's the person individual preference where they buy their toolbox from PA from the tool truck online or from the box Storeif you make the money and you can afford it then that's your decision on what toolbox to buy and how much to spend as far as scan tools I can't answer that one because I don't know not my area of expertise I say by whatever gets the job done the correct way I would say it all scan tools have their pros and cons so again youth whatever you think or takes to get the job done the correct way is my opinion

So my question is can I go to a trade school and then start as a lube tech at a dealership can I work my way up to making a lot of money. Or do I have to do more independent shop not dealership.

@MrTmenzo

4 жыл бұрын

Take whatever is offered to build your resume.