I love how the bolts just came right out, no broken bolts, no nuthin... wish it were that easy.
@KendorFarms
9 ай бұрын
It's probably from being in and out frequently u fortunately
@Thafuface21 күн бұрын
Great Video Man Thanks. Glad to know you can fit an impact in there
@stewbuntu9 ай бұрын
Instead of hitting the hub off you can instert the 4 bolts on a few threads atleats 3 or 4. Doing the driver side - with the truck off turn the steering wheel to the right. Cut a piece of 2x2 or put an extention on the socket for the bolt to go from the bolt to that indented part on the frame. Then turn the wheel to the left and it will press out the hub with barely any effort at all, less than with the wheel on the ground trying to turn the wheel with it off. I personally believe when people do ball joints and bang on the hubs that it destroys the bearings somehow, not sure how but maybe rattles dirt or metal in there or.kicks shavings or metal dust off the hub wall into the bearings although its a uni, or something bc every hub video I have seen, the guys always say , " this should come off easy this time bc I just did the ball joints." I mean every video. Not sure why or how but I really stood out to me. Anyway the press method works great.
@user-iq9jq3dg5q9 ай бұрын
Great stuff. Thanks for the information
@roadrunner68514 ай бұрын
Very simple and informative, thank you brother.
@amadueskooler65593 ай бұрын
if you have an old rotor or replacing the rotor bolt the rotor back on and hit that , more leverage ,or if the rotor is stuck on leave it and go for it
@rbshort1519 ай бұрын
Thank you very good directions
@WebflingerJoe Жыл бұрын
Wicked man thanks, looks ezpz
@Moto29011 ай бұрын
Another video said it is a 34mm axle socket??!
@jrem4283 Жыл бұрын
Good video. Would this work on a 21? Couldn’t tell what year you have? Thanks
@KendorFarms
Жыл бұрын
Yep, should be the same. Thus was an '11
@jake3137611 ай бұрын
Do these axle bearings need to be greased? Had the bearings on one axle completely burn up and fall out. Just wondering what maintenance they need. Thanks for the well done video!
@KendorFarms
10 ай бұрын
They should all be a sealed unit and basically maintenance free until they fail unfortunately
@callsignmohas5190Ай бұрын
Dude iv been at it for 24 hours just trying to get the axle nut off. Used air and electric impacts, long breaker bars with jacks. Torch and pb blaster. Wont budge
@KendorFarms
Ай бұрын
Wow! Sounds like a real bugger!
@callsignmohas5190
Ай бұрын
@@KendorFarms it’s something…. If nothing else works, I might just have to cut the nut off and go buy a new one. Hopefully I don’t bugger the threads
@KendorFarms
Ай бұрын
Can't believe it's that tight! Even using heat
@callsignmohas5190
Ай бұрын
@@KendorFarms myself, and two of my corn fed neighbors, who are quite big guys cannot get this thing loose. It’s just crazy that when we put the jack underneath the long bar it’ll almost pick up the front end of the truck off the jackstands before the nut will break loose. The nuts on so tight it’s almost picking up a second GEN dodge Cummins its insane
@FireManSRTTV3 ай бұрын
There is NO WAY that hub came off that easy 😳
@KendorFarms
3 ай бұрын
Hahaha it seems to come off pretty frequently
@FireManSRTTV
3 ай бұрын
@@KendorFarms 👀👀 that is awesome🙌🙌🙌
@nickromano885110 ай бұрын
Do you think I can get hub nut off with a 1/2 inch drive or do I need to buy 3/4 inch ratchet, socket & breaker bar?
@KendorFarms
10 ай бұрын
I've always used 1/2 inch and been successful. Its shouldn't be that bad to come loose. If it is, give it some lube or even heat fron a propane torch will help
@nickromano8851
10 ай бұрын
Thank you for letting me know@@KendorFarms
@roberthutcheson3674
9 ай бұрын
What hub assembly did you go with?
@KendorFarms
9 ай бұрын
@@roberthutcheson3674 I think it was moon but can’t remember
@KendorFarms
9 ай бұрын
Sorry, Moog
@ATeamAdventures3 ай бұрын
I have a 2020 ram 2500 that needs hub&bearing replacement. Where did you purchase this part from?
@KendorFarms
3 ай бұрын
I believe I used rockauto, they were definitely the best price, but shipping can be expensive. Still ended up cheaper then buying local if you have time to wait for delivery
@ATeamAdventures
3 ай бұрын
@@KendorFarms thank you very much. I will look into them. I’m curious to know if it can fit the 2020 models. I’m assuming so as long as it’s a 8 lug correct?
@KendorFarms
3 ай бұрын
@@ATeamAdventures You’re just changing out the wheel bearing and buying another one?
@ATeamAdventures
3 ай бұрын
@@KendorFarms yes that’s correct. But when I search on Amazon etc it shows that some parts are not compatible even though it shows 8 lugs.
@KendorFarms
3 ай бұрын
Amazon isn’t quite there yet with the automotive side, but if you look up the part on RockAuto, it’ll give you many different prices/manufactures and maybe you can cross reference the part numbers with the ones on Amazon
@iAvi88 ай бұрын
Does it need an alignment after this?
@KendorFarms
8 ай бұрын
Nope, you should be ok
@guacamoleweiner69
2 ай бұрын
No. Wouldn't be a bad idea to get it checked every 2 oil changes tho
@laurencenarcisi437023 күн бұрын
Do you replace both sides?
@KendorFarms
23 күн бұрын
No, not necessarily. One can fail long before the other
@blasgarcia37016 ай бұрын
What was it torque at?
@KendorFarms
6 ай бұрын
The axle nut?
@DavidMyhill6 ай бұрын
What year is this?
@KendorFarms
6 ай бұрын
2011
@terryneri2878 ай бұрын
the 4 bolts for wheel bearing bolts is 18 mm not 17
@KendorFarms
8 ай бұрын
Some could be
@RockyMtnWay_406
16 күн бұрын
Is 258lbs the correct spec for the axle nut? How about the 4 bolts that hold hub on?
@KendorFarms
16 күн бұрын
Maybe on yours, but not on mine
@KendorFarms
16 күн бұрын
The 4 bolts I just impact on, the axle nut is 258 ft lb
@KendorFarms
16 күн бұрын
Over torque will shorten the bearing life, so I torque that one
Пікірлер: 53
I love how the bolts just came right out, no broken bolts, no nuthin... wish it were that easy.
@KendorFarms
9 ай бұрын
It's probably from being in and out frequently u fortunately
Great Video Man Thanks. Glad to know you can fit an impact in there
Instead of hitting the hub off you can instert the 4 bolts on a few threads atleats 3 or 4. Doing the driver side - with the truck off turn the steering wheel to the right. Cut a piece of 2x2 or put an extention on the socket for the bolt to go from the bolt to that indented part on the frame. Then turn the wheel to the left and it will press out the hub with barely any effort at all, less than with the wheel on the ground trying to turn the wheel with it off. I personally believe when people do ball joints and bang on the hubs that it destroys the bearings somehow, not sure how but maybe rattles dirt or metal in there or.kicks shavings or metal dust off the hub wall into the bearings although its a uni, or something bc every hub video I have seen, the guys always say , " this should come off easy this time bc I just did the ball joints." I mean every video. Not sure why or how but I really stood out to me. Anyway the press method works great.
Great stuff. Thanks for the information
Very simple and informative, thank you brother.
if you have an old rotor or replacing the rotor bolt the rotor back on and hit that , more leverage ,or if the rotor is stuck on leave it and go for it
Thank you very good directions
Wicked man thanks, looks ezpz
Another video said it is a 34mm axle socket??!
Good video. Would this work on a 21? Couldn’t tell what year you have? Thanks
@KendorFarms
Жыл бұрын
Yep, should be the same. Thus was an '11
Do these axle bearings need to be greased? Had the bearings on one axle completely burn up and fall out. Just wondering what maintenance they need. Thanks for the well done video!
@KendorFarms
10 ай бұрын
They should all be a sealed unit and basically maintenance free until they fail unfortunately
Dude iv been at it for 24 hours just trying to get the axle nut off. Used air and electric impacts, long breaker bars with jacks. Torch and pb blaster. Wont budge
@KendorFarms
Ай бұрын
Wow! Sounds like a real bugger!
@callsignmohas5190
Ай бұрын
@@KendorFarms it’s something…. If nothing else works, I might just have to cut the nut off and go buy a new one. Hopefully I don’t bugger the threads
@KendorFarms
Ай бұрын
Can't believe it's that tight! Even using heat
@callsignmohas5190
Ай бұрын
@@KendorFarms myself, and two of my corn fed neighbors, who are quite big guys cannot get this thing loose. It’s just crazy that when we put the jack underneath the long bar it’ll almost pick up the front end of the truck off the jackstands before the nut will break loose. The nuts on so tight it’s almost picking up a second GEN dodge Cummins its insane
There is NO WAY that hub came off that easy 😳
@KendorFarms
3 ай бұрын
Hahaha it seems to come off pretty frequently
@FireManSRTTV
3 ай бұрын
@@KendorFarms 👀👀 that is awesome🙌🙌🙌
Do you think I can get hub nut off with a 1/2 inch drive or do I need to buy 3/4 inch ratchet, socket & breaker bar?
@KendorFarms
10 ай бұрын
I've always used 1/2 inch and been successful. Its shouldn't be that bad to come loose. If it is, give it some lube or even heat fron a propane torch will help
@nickromano8851
10 ай бұрын
Thank you for letting me know@@KendorFarms
@roberthutcheson3674
9 ай бұрын
What hub assembly did you go with?
@KendorFarms
9 ай бұрын
@@roberthutcheson3674 I think it was moon but can’t remember
@KendorFarms
9 ай бұрын
Sorry, Moog
I have a 2020 ram 2500 that needs hub&bearing replacement. Where did you purchase this part from?
@KendorFarms
3 ай бұрын
I believe I used rockauto, they were definitely the best price, but shipping can be expensive. Still ended up cheaper then buying local if you have time to wait for delivery
@ATeamAdventures
3 ай бұрын
@@KendorFarms thank you very much. I will look into them. I’m curious to know if it can fit the 2020 models. I’m assuming so as long as it’s a 8 lug correct?
@KendorFarms
3 ай бұрын
@@ATeamAdventures You’re just changing out the wheel bearing and buying another one?
@ATeamAdventures
3 ай бұрын
@@KendorFarms yes that’s correct. But when I search on Amazon etc it shows that some parts are not compatible even though it shows 8 lugs.
@KendorFarms
3 ай бұрын
Amazon isn’t quite there yet with the automotive side, but if you look up the part on RockAuto, it’ll give you many different prices/manufactures and maybe you can cross reference the part numbers with the ones on Amazon
Does it need an alignment after this?
@KendorFarms
8 ай бұрын
Nope, you should be ok
@guacamoleweiner69
2 ай бұрын
No. Wouldn't be a bad idea to get it checked every 2 oil changes tho
Do you replace both sides?
@KendorFarms
23 күн бұрын
No, not necessarily. One can fail long before the other
What was it torque at?
@KendorFarms
6 ай бұрын
The axle nut?
What year is this?
@KendorFarms
6 ай бұрын
2011
the 4 bolts for wheel bearing bolts is 18 mm not 17
@KendorFarms
8 ай бұрын
Some could be
@RockyMtnWay_406
16 күн бұрын
Is 258lbs the correct spec for the axle nut? How about the 4 bolts that hold hub on?
@KendorFarms
16 күн бұрын
Maybe on yours, but not on mine
@KendorFarms
16 күн бұрын
The 4 bolts I just impact on, the axle nut is 258 ft lb
@KendorFarms
16 күн бұрын
Over torque will shorten the bearing life, so I torque that one
Did you say 258ftlbs? 😮
@KendorFarms
Ай бұрын
Yep
Comment