RAIMONDI RAI-FIX
Ғылым және технология
RAIMONDI RAI-FIX
For laying porcelain and natural stone tiles/slabs with adhesive on the external walls of the buildings it is
recommended or sometimes mandatory by the law the use of an extra mechanical system. For instance the Italian
law requires a mechanical system like RAI-FIX (patented) for tiles of format larger than 40x40 cm (16'X16').
So the combination of the adhesive and a mechanical safety system, like the RAI-FIX hooks screwed on the wall that hold each individual tile/slab, it is very important.
It's also important the full compliance with the way of application of the adhesives which assures the perfect slab adhesion to the wall, but this does not happen all the times.
In addition, it is not possible to forecast slab strains and assessment which may happen due to natural events such
as; extreme weather conditions with high or low temperatures, earthquake etc..
This system is suitable for tiles/slabs of minimum thickness of 9 mm.
Sistema di fisaggio meccanico di lastre.
• Per l'applicazione di rivestimenti di lastre in ceramica, marmo, ecc. di formato
maggiore a 40x40 cm è richiesto, oltre al fissaggio con adesivi, un fissaggio di
sicurezza meccanico. Gli adesivi garantiscono il perfetto ancoraggio delle lastre se
sono rispettate le modalità d'applicazione, non sempre questo si verifica.
Inoltre non sono prevedibili le sollecitazioni alle quali verrà sottoposta la lastra a
causa di assestamenti strutturali, dilatazioni per escursione termica, scosse telluriche, ecc.
Пікірлер: 40
Эта технология использовалась в 1970 году в Москве
safety and accuracy👍👍👍
This is perfect for the KB home disaster in San Fran. This builder decided to put wood plank tile on the outside of the houses and they are falling off. It is very dangerous I think this would solve the problem. Seems to be very time consuming but very safe. I guess you cant put a price on that.
very good! ! !
For those bitching and moaning. Here in the US I recently came across a question somebody was asking about how to keep the stone veneer attached to the wall 2 stories high. Well here it is. This is the solution. You can rely solely on the thinset to hold the tile or stone attached to the wall and this mechanical fastener really helps the bond. Just think about a store front with a nice stone tile entrance that goes up 2 stories high, would you want it to fall and seriously injured or killed someone just because the installer thought it wasn't necessary or it was gay to use this? Think about for a sec.
@ruzbekdostiyari2734
6 жыл бұрын
Ююю
@randeepjangra3704
6 жыл бұрын
Francisco Espinosa
NICE...!
so if the adhesive isnt good enough to hold the tile.... why would you ever think it will hold the plate and tile..... realy
You don't need no anchor to for tile or stone on a vertical.
But, if the paint is badly applied?
non basta mettere i cunei solo in quelle posizione per non avere denti o scalini nel pavimento
All commercial exterior building need a mechanical bond of some type..
super
رؤؤؤعة
suitable for stone wall
@gamanijayakodi6714
6 жыл бұрын
Thai Nguyen Rubi Vina www.koxs
good
👍👍👍👍👍wwwwooowww
estou precisano de um alicate nivelador
Yusuf I work in the same profession as possible be connected and friends
CD/DVD
Excellent job... Hi I am from India I am interested installing tile and all natural stones.. I am already land in installing Australia... I am more interested now installation learning now...
@Raimondispa
3 жыл бұрын
Hello and thank you for your comment! Please contact us at info@raimondispa.com. Thank you.
coool
Did he just hammer a screw in to an anchor???
Если отпадет,то только со штукатуркой
Не понял,зачем дюбель?
@user-zc3gg9eb3o
6 жыл бұрын
типа страховка от падения. ну чтоб не вешать объявления- предупреждения :«осторожно с фасада падает плитка» 😁
Ottimo. Perché tutti i portatori non usano mai mettere la crocetta nel modo giusto!
Thinset mortar installed correctly should be enough to hold the tiles. 🤦
?
У меня один вопрос! Для чего этот геморой!
Yd
Its stupid.....
Throw in the bin 👎