this vid is 1st

@OwnedRules

2 жыл бұрын

@amr mohamed why ask me? im not the one who made this

@ShamimMia-db5fj

7 ай бұрын

​@@OwnedRules❤😊 Use6😢

@mdsamad3872

6 ай бұрын

​@@OwnedRules0:22 😊😮

This is also an excellent example of chaining fall-through in assembly language programming. Each switch determines whether to divert from the straight track.

Great graphics...it is very easy to understand the 3 way crossing .. thnks buddy.

Wonderful! Incredible amount of information in incredible "simplified" graphic form. Thanks.

Great I love switches turnouts etc, in fact I love them more and the trains themselves so clever!.

I use the train station, called "Ярославский вокзал" at Moscow metro station "КОМСОМОЛЬСКАЯ". It is one of the "VERY BIG" stations! I always seeing switches and switching cross (when a simple cross rail tracks, but also you can drive at left side. At this switch you can go only straight or left (at one way)). I never understand how it is works).

Perfeita simulação! Parabéns!

_Lapped_ is short for _overlapped_ , two turnouts overlapped onto the space of one. British terminology - _sleepers_ in the US are _ties_ . In the US a _crossing_ is where one railroad or a road intersects with another railroad, often called a _diamond_ ,and not where they share a track as in a turnout. Nice animation.

Thank you, this video is very easy to understand

Don't miss last 3 mins of this video and like,subscribe and share if this video deserves it. 🙏

Your animations are phenomenal.

Terminologies used are spot on. Really good video

@Ghauster

2 жыл бұрын

Expect they are point rails not tounge rails that are moved by the point motors.

@SandipanChakrabortySCF

2 жыл бұрын

@@Ghauster The rail which is moved by the motor is called tongue rail while the stationary rail is stock rail in IR terminology

3 D images. Love the tracks & trucks. Look 100% realistic. Great illustration on this video. 🎥 🛤

Very entertaining and fun to watch. Thanks for posting this.

I really love three way switch tracks. It's two of my favorite train tracks of all time. The other one is the double slip switch.

@workingsgotanimated

Жыл бұрын

I created the double slip switch crossing too. check out in the channel if u have not seen it yet.🙂🙂

This explanation was just beautiful 🙌

Sehr gute Darstellung , sehr verständlich gezeigt , einfach genial

Impressive video about railway crossing from left, right, and straight! : )

That's *not* a three way turnout, that's two overlapping standard turnouts. Three way turnouts have double points and are roughly symmetrical. They are also fragile, expensive to manufacture and difficult to maintain, which makes them very rare.

@conductorcammon

2 жыл бұрын

Conductor here. Had something like this at our old roundhouse. We called it a puzzle switch.

🌹VERY VERY GOOD AND INFORMATIVE VIDEO.. I. REALLY IMPRASSED🌹Very good creativity🌹so thanks🌹👍

An easy explanation, thank you.

分かりやすかった

Thank you for your hard work.. Another informative video thank you

this video is brilliant its the best in the world

very nice video to see how it works ty !

Espectacular!!!!!

Your video making is absolutely fantastic bro..

Incredible,,, Thanks a million

Super video combined with an awesome music

Nice vid, we usually call them points though, but great job none the less!

Fantastic explanation!😃👍👍

Good work with nice graphics. Thank you.

Amazing animations 👌👌 Good luck for ur future videos.

Amazing!

Great animation!

great animation, i like it!

0:51, With the grooved rail, Does the flange sit inside the groove or does it sit on the other side of the groove?

THANK YOU! I can get married now

I have a question. While the train goes directly through the straight track ( last scenario at 5:21), there are no checkrails that preventing train to derail from frog location. How is it possible to be considered as a "safe design"?

@zafertektas1177

2 жыл бұрын

Dear colleague you already know this answer. Because you are expert turnout designer. 😎

@Mockheed_Lartin

2 жыл бұрын

There are check rails out there too, I've encountered them many times.

Wow...Awesome animation. Please keep going!

Very informative video

A best animation

Brilliant - a joy to watch and I like the quiz.

muito interessante !! gostei !!

wonderfulllllll!!!!!!!!

Cool, it is very informative.

awesome graphics !!!!

excellent video!

Very interesting and informative video. Great animation...I actually learned something! Thank you for creating, uploading and sharing! 🚅

Nice informative video. Thanks 👑🌐🌴🚅🚄🏆💞👍👍👍

Which software are u using for animation??

Very interesting!

Good information

Muy bien e interesante

awesome.😊

Great

நல்ல இருக்கு

Really Good

Basically it's just 2 track switches at a very close distance making it look like a 3 way joint From main track to sub track and from sub track to sub sub track

Soo nice

Nice

Thanks

Nice 👍👏

nice 3D Animation

@workingsgotanimated

2 жыл бұрын

Thank you. :)

i never know its bending the steel, rather than having some kind of hinge. ik its only a slight bend but will it causes any problem over time?

@workingsgotanimated

2 жыл бұрын

good question.. but sorry! I don't have the exact answer of your question. In this animation ,it's not the exact copy of real thing.. it's only for educational purpose and easy understanding.. as you mentioned in reality it's slight bend and oneside hinged to heelblocks.. different problems can come up in this mechanical assembly, that's why schedule maintenance, repair, replacement done over time.

@SandipanChakrabortySCF

2 жыл бұрын

Steel rail is malleable enough for that length. It is regularly monitored and maintained by concerned staff and they are replaced after they earn a number of weight over the year(and ofcourse replaced if any fault is found).

@Pribumi1

2 жыл бұрын

Some narrow gauge rail jucntion have hinges on then as the rail are not long enough to bend on its own

The graphics are great. But, the written info at some points is removed from screen too quickly.

You forgot the fourth state. Since there are two "binary" switches, the fourth state is called self destruct. It makes the train fall off the tracks.

@Skibitihatsealofficial

8 ай бұрын

The derailer a tiny bump that pushes it to the side

Than you so much😍

Keep it up Bruh

It's essentially not really a "3-way" in the strict sense, but two 2-ways right after each other.

@workingsgotanimated

2 жыл бұрын

for normal understanding, you can say that but if you noticed the design carefully...it's a lapped 3 way crossing.. or lapped turnout crossing.

@magnushmann

2 жыл бұрын

@@workingsgotanimated Yes, if I understand you correctly, I misspoke and should have called it two 2-ways _overlapping_ each other?

@StefanWithTrains3222

2 жыл бұрын

@@magnushmann yes

Simple and straightforward. Are you a track engineer?

Is it operable? or only a design? Can you present a video where this type of crossing is used? or only deceit?

TQ sir❤❤❤❤🎉🎉🎉

Terminology is significantly different in the U.S.

Good❤❤❤❤❤❤❤❤❤

basically it is just two normal crossings behind each other

Which program? Please

if a railway is using a double or even triple gauge, than the switch is a little bit complicated. I knew this since I was in high school, as a basic knowledge in rails drawing railfans world.

ive seen some train fish plate connested then welded for even more strength

3:00 are your sure about the stretcher bars? In your video you see four rods from the POM to the tongues rails. Two of them are responsible for the changeover. The other two monitor the position tongues. If you have a fixed strecher between the moving rails, you only need one rod to move and one two monitor as the opposite rail always do the same. So there is no fixed rod between the tongues (at least not in the front near the tip) The two tongues move independently of each other and for different lengths of time. The tongue that opens the gap moves slightly longer than the tongue that closes the gap. This makes the gap slightly larger and the flank of the wheel passes better through the gap. By a clever mechanic in the drive, the adjacent tongue is locked at the same time. The monitor rods just check if both tongues reach there end position. And if (for example) a train split the points, these rods are moved and and alert the signal box. Regardless, your videos are great and I've forwarded them to families with children. So they learn technology and English in one 🙂

Right

How to download this app

What happens if the train is going in the opposite direction and the switch isn't orientated in that direction? Does it derail?

@Twittler1

Жыл бұрын

Most likely, yes.

@An_Official_Scratcher

Жыл бұрын

It will derail because the flange runs over the rail therefore pushing it away from the other rail.. Or in EXTREMELY EXTREMELY EXTREMELY RARE cases, the flanges will land back in the tracks.

I did not think it would be possible

👍🚞

And where is the stretcher bar for the 2nd rail arrow? It looks dangerous

2:34

Oh, so it's just 2 normal switches but placed so close together they overlap each other.

А что же при движении по прямой забыл нарисовать ещё два контррельса напротив крестовин?

In fact it is shown that there is NO 3-way crossing, but instead 2 two-way crossings short after another.

👌👌👌👌👌👌👌👌👌👌🙏

How is this not just two switches really close together?

Could you show symmetrical three way railway crossing?

V were manufacturing these for IR

In fact, its double 2 way crossing )

2:05 Why this joint pieces are called 'fishplate'? it looks nowhere like fish nor has anything related to fishing activity.

During the loop chance if the track gets blocked by any debries or any thing and prevents the mechanism to change ta track what will happen it will cause accident I think this is the main cause of the coromandal train accident the loop line was engaged and the the track didn't change its position and thus cause the accident

@infinitebeing1119

Жыл бұрын

There is fail safe system to indicate this. The green indicator will only turn on if the mechanism set on its right position. Don't understand how is it possible that it indicated wrongly. These systems do have multiple circuits if one fails another work.

@2:13 that would be _tapered_roller bearings

走正中间线路，一边铁轨没有护轨，低速通过没事，超过20公里每小时的速度通过，车轮会脱轨。

a three way 😃😃