Thanks for this informative "quick" question answering. Totally worth my time to listen to you. cheers.

Absolutely great video! So anticipated you getting this radio. Thank you for such great attention to detail as always.

Thanks for the LED give-a-way Lee! I'll be watching all of these videos over again!

WOW, looks like a well rounded radio....Great review P360!

got my radio a few days ago. Nobody has instructions on how to get info on the screen, like timers, model pics, ext. Thats love your channel.

@Painless360

3 жыл бұрын

I do. In the playlist.... Happy flying

Thanks for all the answers. Very helpful as always.

Great video. The sliders feel like a missed opportunity - a lot of people would drop their jumpers for that reason alone.

Great info looking forward to mine this week hopefully

This video really is useful and makes Taranis more of an option and less a 1 shot deal....it is great to see some innovation in the radio side of the hobby and great to see a decrease in monopolistic tendencies especially given the fact that it was the openness that got Taranis started in the first place. Thanks, Lee:-)

Thanks! Haven't seen that youtube feature before where you can section off the video. Very cool, thanks for your coverage.

@WrongWayFPV

4 жыл бұрын

He does that in his editing software. Not a feature of KZread, unfortunately lol.

very helpful, nice questions and great answers cheers

I like the radio...and review as well.. thank you Lee..👍

Thanks Lee ,always a help.

Nice informative video! Up for more :) . Thank you!

Great Review! Thanks so much.

Really useful info, thanks!

I am super excited for this radio!! Pre-ordered mine last week. I hope they start shipping soon 😬😊

Great review, Thanks.

For pinches, the new Jumper T16 Pro V2 gimbals have an adjustment screw that can tilt the gimbals left or right depending on your finger lengths.

Thanks for the informative video! I was wondering - can we use this radio to flash new firmware to receivers in the same way we can with a Taranis? Thanks!

For the screen, imo (and I've got a tx16s) the touchscreen will be super nice. I'm already sorta finding myself pressing the screen to try do stuff like widgets lol. Also, if you go to system > hardware > analog you can test the screen and I can confirm that it's both accurate and sensitive enough.

@12beemer34

3 жыл бұрын

Thanks for posting this...I didn't know that my screen was even active yet. I thought I still had to load a new software release (I've only had my TX for a week).

@gautamkrishna7421

3 жыл бұрын

@@12beemer34 I think we’ve got to wait a month or two for opentx2.4 to support actually using the screen in the menus and stuff but yea it you can check you have the touchscreen in the menu.

@12beemer34

3 жыл бұрын

@@gautamkrishna7421 I'm still learning this TX. I did find a bug, maybe you can see if yours does the same. In system/hardware/debug if I debug "switches" first I can see all switches work properly. But if I debug "analogs" (testing the screen) and THEN go back to "switches" I find that all switches work except SB. Once I select "down" on SB it freezes. All other switches continue to work but SB stays frozen in the down position. I have to do a power reset to get it to start working again. I looked on OpenTX for any open issues like this but I didn't see one.

Thanks. Still wondering about additional contacts to wire in extra inputs like on the X9E has?

Thanks for this video Lee! Question: What does it mean when the power LED is red? My friend has this radio and we have seen this once or twice. But the radio works great. Just trying to understand the color codes for the power LED. So far we have seen the power LED blue, green and red.

@Painless360 Do you think the 5 in 1 internal module could be used in a Jumper T16 to get the R9 functionality?

Still wondering about the charging current of the internal charger.

Can you please test if the silicone bits on the back of the radio (the ones that now have a ridge that helps holding the radio when pinching) fit the jumper t16? and thank you for the great review!

What kind of cable (3,5 mm jack stereo or mono) were you using to connect the radio's together in the master/slave test that you did? Just asking because some people noted it did not always work on a Jumper T16 as master, while connected to a X9D+ as slave. It seems also related to the cable used and the version of OpenTX, but not always.

@Painless360

4 жыл бұрын

All covered in the linked trainer video.

One more question: When flying a model bound to the internal module, is the external module completely switched off/ no voltage? And vice versa? My plan is to use a Jeti TU2 module as external module. This has no own antenna. Plan is to connect to existing antenna, but only possible if only one module is switched on at a time.

@Painless360

3 жыл бұрын

You can turn them on seperately via the menu in the radio. Best of luck

@stephanbre

3 жыл бұрын

@@Painless360 Thx :-)

Thanks for your video and Answers. I'm trying out telemetry right now. Up to now I have not been able to have the audio announce the volt value two places after the decimal point. E.g. the lowest cell value is 3.54 volts, the announcement is 3.5 volts. Or is that not possible at all?

Thanks for the info, looking forward to it being available here, one question on the matter of protocol, does it do JR Dmss Boomshanka👍

What battery range would you recommend setting when using a 2s lipo 3000mah battery?

Excellent review !!! The big thing I have noticed, no ribbon cables !! I've had to reseat the ribbon cables on my Jumper T16 Pro twice already. If I were to buy today, this would be my radio !!

Does anyone know if this with work on Macs via USB for simulators? I've been searching for hours and can't find the answer.

Thanks for all the great videos, your channel has the most useful content!! I tried putting the yapuu telemetry script on my tx16s but after a short time it goes into emergency mode. Anyone else have the same problem?

@Painless360

4 жыл бұрын

Probably an Opentx thing. I'm waiting for the radio to be officially supported so I can update it.. Best of luck

thanks for the video mate, what is the size of the gimbal screws M3 or M4? thank you

I mostly plan to use xm + receivers. Considering this situation, would you recommend frsky X9d + 2019 or radiomaster t16?

@Painless360

4 жыл бұрын

Either are great choices. Depends if you want to stick with just Frsky... Happy flying

Does it do Hitec Red receivers so it could be used to fly the Ares micro planes?

MOST Positive too Purchase AFTER all improvements !! HAPPY to pay $100 U.S Extra !!

What telemetry recievers will you be using with the tX16? Can we use the new frsky access receivers and flash back to ACCST?

@Painless360

4 жыл бұрын

If the Rx will support v1.x or v2.1 of ACCST then yes.. I'm using lots of X series here and also like the Jumper RX too..

Any idea how to pair with HiSky HCP100S heli? When putting TX16S into pairing mode, it is able to temporarily control the heli but pairing is not saved. May be issue in heli end, but could not find any useful info from it's user manual.

@Painless360

2 жыл бұрын

See my video from the weekend about binding. There may be a setting for the protocol you are using.. Best of luck

Brand new to drones and I've read a lot of advice telling me to get this controller and practice in a simulator until i feel comfortable enough to fly a drone irl. I just purchased this and realized that it may need special batteries (Which, it obviously does.) does this radio need to battery powered in order to use it on my PC?

Hi what does the six buttons do above the logo(that light up red)I noticed you had one lit up?is it for the switches? BTW I have this on backorder.thx

@Painless360

4 жыл бұрын

It's a six position switch.. See the T16 videos..

What is the transmission power? How is the range of this radio with a normal receiver?

Great followup to the introductory review. Wow...I just received my Jumper T16 Pro last week and I was wondering - should I be concerned regarding its ribbon connections? And now [in addition] the Jumper T18 is around the corner. Choices choices... At these prices I am willing to pick up another one as a backup [still cheaper than one DX8]. Again. Another brilliant review. Greetings from Florida.

@Techdragonz

4 жыл бұрын

I've had my t16 pro for half a year now and haven't had any issues with those ribbon cables. Really happy with the radio.

One thing puzzles me about the 5-in-1 supporting FrSky/FlySky etc. and R9 - there's only one antenna. Are they really pushing a 900mhz signal out of a 2.4ghz wavelength antenna for R9?

@WrongWayFPV

4 жыл бұрын

I think you still need the R9 module. The firmware on the radio supports R9.. not replace the module. Not sure, just my assumption lol.

@licensetodrive9930

4 жыл бұрын

@WrongWay FPV I think you're right about it having module support not it having it already internally. I heard the 5-in-1 was 1 more than the 4-in-1 because it did R9, from someone who doesn't own one (yet) as they were reading specs.

Would you consider doing a quick video on a Spektrum setup on this radio, something that covers the bind, switch with 3 flight modes and perhaps the panic switch found on standard horizon hobby models

@thefireman2854

4 жыл бұрын

Would really like to see that as well.

@Painless360

4 жыл бұрын

If I knew what that system needed to see (the order of the channels and positions to activate the modes) I'd love to...

@jpsalis

4 жыл бұрын

@@Painless360 I think it's TAER, from my time with spektrum. I will test this with my T16 and report back.

@jpsalis

4 жыл бұрын

The channel order seems to depend on the setup of your multiprotocol module. Mine is flashed with the AETR version, so I had to map it in that order to get it to operate properly. I also had to swap some channels in the output.

@Painless360

4 жыл бұрын

Thanks, what about the panic switch and modes?

there some HARDWARE CHANGES to the 3rd batch of radiomaster t16s (got mine just a few days ago hallsensor version) the protective film on the touch screen doesn't have a grid pattern on it that so many thought to be the touch screen pattern, there's a larger louder speaker installed in the back cover not in the back of the grid in front so two halves are now connected by two cables, probably important info for anybody opening the radio for the first time and the project box is replaced with a simple flat plastic cover and you get extra screen protector in the box.

@snoopy_fpv119

3 жыл бұрын

the same and opentx 2.3.9 on it

@graywoulf

3 жыл бұрын

So, there is no grid pattern showing at all? And is the rear speaker mounted in the JR bay?

@burned_esc

3 жыл бұрын

@@graywoulf no grid pattern at all and no speaker is not in jr bay its somewhere in the back right side corner, there was always a designated place for a speaker there. I'm not sure but I think only the review samples and maybe the first batch of radios had a small speaker in the front

Gal kremer has fitted the t16 folding handle with no issues

Is there a ir wireless usb stick that works with the Radio Master TX16S that will work with the simulator games?....Thanks!

if you use frsky recievers. how do you update those? can you use that uart ports?

Good day Lee. What LiPo Battery connection is used to connect the battery? or just the balance plug? Jeff. I searched and found it. it's the Balance port.

Would love to see a video of how to use my "old" Jumper T16 as a trainee and my new Radiomaster TS16S as a trainer! Wired and wireless...

@Painless360

3 жыл бұрын

See my video on the wireless trainer setup using the 4in1...Happy flying

How do i know the remote is charging and when it’s done charging?

I'd like a radio system to use with GPS quads and wings would this be a better option for me than a skydroid T10 or T12? Thanks in advance

@Painless360

4 жыл бұрын

See other answer.. ;)

I’m glad it balances on your neck strap I however need to move models over from my xd9+ to the tx16s because my screen is damaged on my old radio and it won’t accept them no matter what I do Haw do I do this, or do I just need to go line by line and do it by triple and error

@Painless360

4 жыл бұрын

See my OpenTX setup video for this radio and the cloning feature video - both in the playlist... Best of luck!

Have you encountered low signal alarm while taxiing on ground about 60 yards away or so? I am using DSM receiver.

@Painless360

3 жыл бұрын

I don't use DSM anymore but I do get low RSSI if the antenna isn't aligned well or too close... Happy flying

Hi. Will you be doing a review on the new Jumper T18 was wondering what receivers will work with it in 868Mhz mode

@Painless360

4 жыл бұрын

I hope to - stay tuned!

I bought the t16 pro v2 a few weeks ago but fortunately because they are not in stock I was able to change the order for the t18, waiting another month. I'll look forward for a comparison between this tx16s and the t18. They seem practically the same except for the cheaper price and the uarts in this one. I hope the t18 has that metal roll button, it seems nice to the touch. Maybe the t18/t16 pro are more robust and made of better plastic...

@Painless360

4 жыл бұрын

Stay tuned!

@DiogoFilipeR

4 жыл бұрын

@@Painless360 as always 😄 thank you for your work!

They finally updated the faulty ribbon connections with good old wire connectors?

@Painless360

4 жыл бұрын

If by 'they' you mean Jumper. No, they didn't. Happy flying

im sorry if i miss it, if it was mentioned, about the crossfire, it promises a good latency and really good, however, i am wondering if i can use if not for drone but for a plane with 5 channels only (trottle, 2 v tail, and 2 aileron).

@Painless360

3 жыл бұрын

Check out the Crossfire series on the channel - I cover all of that and more. You can use Crossfire on a model in the same way as any other radio system (and a few other cool ways too!)

I don't think they will, but can you check and see if 26650 sized cells will fit in the battery compartment please? Or measure the depth of the battery compartment? Needs to be 26mm. Radiomaster website says it's only 25mm though.

Hi , great video !! thanks for the info!, ... quick question.. I have a DSMX spektrum receiver, everything works fine, BUT , when I connect my battery on my quad, the transmitter does't read the telematry... It flight great everythung is goos, but ther's the notification "Telemetry lost" my RSSI bars dissapear from my widget bar , and when I go to my MDL page and look at the sensors, they are all working ... do you have any idea why this Telemetry lost and RSSI bars dissapeard from my widget top bar??.. thanks!

@shiftx1579

3 жыл бұрын

Did you ever find out? Have you ever lost signal with spektrum receiver and dsmx, I'm currently getting low rf, critical

One thing I didn't like with my T16 was the roller, it seemed to have some... sloppiness, when switching directions, is the best way to put it. I put some tape around the metal part of the roller to give it some more thickness. Does the radiomaster have the same issue? I noticed it uses a very similar mechanism with its metal roller.

@Painless360

4 жыл бұрын

This one feels a lot better...

Thank you. One question I have is can this bind and properly operate planes with Spektrum dsm2 and dsmx? I'm looking to replace my Spektrum radio but have several planes with Spektrum rx, etc

@Painless360

3 жыл бұрын

See my videos that cover this. The supported protocols are listed in the wiki. They do include Spektrum.. best of luck

@JohnRBooth

3 жыл бұрын

@@Painless360 Thank you friend. I'll try to find your video that covers this. I enjoy your vids immensely - John

How many resiver / models /divicees can be connected with the transmitter?

Hello all, Does anybody know if it is possible to bind the tx16s to a walkera wd450 d03 (RX2703H-D)? I’m a newbie and can’find any confirmation nor negation anywhere...

@Sexiestpilot4u

2 жыл бұрын

Looking for the same info!!

Probably a daft question but can't find any info and don't wnat to make a mistake if I order one. On the mid range version (TX16s) can I plug in an existing TBS micro TX and use it or is it only the top of the range version that supports the TBS Micro Tx?

@Painless360

4 жыл бұрын

They all should support it... confirm with the vendor...

Might be easier to use a strap for pinchers, take that weight off your arms and make it more comfortable. I’d like one by I’m used to mode one, tried using a mode 2 radio for a while and just couldn’t get the feel for it, so I changed it to mode 1, it was a spektrum DX6e by the way.

I like to tell you that your videos are quite informative and interesting. I would like to know what would you use (kind of switch) to choose from the 8 FM available in Open TX (Radiomaster TX16S). Six is easy and quite visible, but eight...

@Painless360

3 жыл бұрын

I've never needed to do that here. Why do you need 8 fight modes? I'm interested...

@enriquech4041

3 жыл бұрын

@@Painless360 Just for the sake of it. I added momentary switches T5 and T6 to the 6P in the upper part of the transmitter and they are working together now, for 8 flight modes. Regards

yes good video and I have purchased the radio master but can't get it to bind to my fr sky x6r does the receiver need to be updated to the radiomaster protocol

@Painless360

3 жыл бұрын

No. Make sure you are using the correct protocol. See my Mulriprorocol tips video...

Just bought a timber turbo evolution and am having a hard time getting the safe on/off attached to a switch. I thought safe was on channel 5 on Spektrum. The book call for anything up to channel 9 so maybe I need to try to set it up on 1 of those channels instead of channel 5. Any thoughts? Thanks, Al

@Painless360

Жыл бұрын

No idea. If you figure it out, please post the answer. I'd try it on every channel, one by one..

@albertherlicka4078

Жыл бұрын

@@Painless360 worked on channel 7!

Thanks for the video Lee, - and all the others. Priceless! I have a couple of questions. 1) Can the telemetry function of the TX16s be used with QGroundControl installed on a PixHawk-4 Flight Controller? 2) Can parameters such as PID values be changed in flight, using the TX16s telemetry? I so, would this be via MavLink? Thanks - keep up the good work :-)

@Painless360

2 жыл бұрын

1) I've not tried to forward telemetry to an external device here so not sure. 2) it depends on the system. Some radio links are bi directional and allow for things to be set. It usually needs a LUA script on the radio to do it.. Best wishes for the project

@alank.3519

2 жыл бұрын

Many thanks 👍

I asked about screen. Some say touch screens are not as legible as regular screen. Is that not true? How does it compare to T16 screen? Thanks.

@Painless360

4 жыл бұрын

Not as clear as a non touch thanks to that grid but I'm not noticing it in use now..

Can you use a switch to active the binding of a model, instead of editing and pushing the bind button?

@Painless360

3 жыл бұрын

Binding for many recievers is a one time thing but for those who that it isn't you can't use it a switch. Happy flying

Is there a charging status indicator, so you can see when your battery's are full, when charging?

@Painless360

4 жыл бұрын

Yes there is. Power LED lights and there is a icon on the screen too..

Hey...Just a quick question..I got the Radiomaster Tx16s and I'm wondering if it will bind with my old Turnigy receiver's? I tried flysky but no joy. .

@Painless360

4 жыл бұрын

There are a few Flysky options... hobbyking did lots of recievers that were compatible with different protocols.... Best of luck

@FPVIreland

4 жыл бұрын

@@Painless360 Yeah...I eventually got it..Flysky was the one...Thanks for the great videos...Keep up the great work.

Just bought the Twin Timber and can't get the reverse thrust set up. I got the reverse set up on my Turbo Timber but can't remember how I did it. Can you help? Thanks, Al

@Painless360

Жыл бұрын

There is usually another connection wire from the ESC in addition to the normal one you'd find. Plug that into a spare channel on the reciever and set that channel up with a switch... Best of luck

Hi lee...just got my tx16s today..😊 and 18650 batteries 2000mah. Iam bit confused regarding usb adapter..can i use my Samsung phn adapter ? To charge battery in Radio? Please advise thank you!

@Painless360

3 жыл бұрын

Any USB adapter should work but I always remove the batteries from the radio to charge in case something bad happens..

Hi Lee, can I use Futaba Fasst receiver with this radio? I have Frsky - Fasst receiver that unable to bind with this radio.

@Painless360

3 жыл бұрын

Check out the FAQ video in the series where I show how to check.. Best of luck

Hey! Can you adjust the spring tension on gimbals? I’ve heard it comes rather loose from the factory. Cheers

@Painless360

4 жыл бұрын

Depends on what you're used to - feels normal to me. I don't think they are but will check with RadioMaster.

@jdraper12

4 жыл бұрын

You can adjust tension on the throttle

is it possible to switch the grips? and is the durability the same as an more expensive remote like maybe the horus or smthg like that? or more like good enough for the price? thank you realy much for an answer =)

@roymoon1

4 жыл бұрын

It's all Chinese electronics. Horus has a nice heavy case with Chinese electronics. All electronics get cheaper in price and perceived quality.

I'm have a problem with a Aeroscout with a AR630 receiver it's binding ok but it's not letting me disengage the safe mode

@Painless360

3 жыл бұрын

Depends on what value it needs on what channel from the radio for the SAFE system. I've not used it here but the supplier should be able to help you. Best of luck with it..

Thanks realy informative video, i was wondering about the durability tho, also on the inside. Do you think like it is durable all over and will hold quite a long time? Also will there be replacement parts available for all of the stuff if a switch were to break, or other stuff? Thanks i hope my question gets picked up =D

@dodo3441

4 жыл бұрын

According to their website you'll be able to buy most parts as replacement

@roymoon1

4 жыл бұрын

Look at it from a different angle. It's a $130 radio with more features than the name brand at 3 times the price. So if it lasts 2 years you are still money ahead. Go price a Futaba.

i have mine coming soon but i cant find anything on how to transfer my spectrum models over to the t16s if u know or can direct me to another vid that shows how it would be helpful thanks

@Painless360

4 жыл бұрын

Not sure how to copy models form a Spektrum radio. If you figure out a way to automate it, please let me know. Best of luck

What should I set the low voltage alarm to? Thanks a million.

@Painless360

3 жыл бұрын

For a model I usually want it to warn me around 3.7 -3.8 volts per cell so I can land and have the pack still well above the 3.5v per cell minimum.. Happy flying!

Nice video. The Radiomaster TX 16S works with Hitec receivers, is it compatible with the Hitec HTS-SS Blue Telemetry system?

@Painless360

3 жыл бұрын

The capabilities of the Multiprotocol module are changing all the time so check the the project wiki for the latest... www.multi-module.org/basics/supported-protocols

Great T16S videos! Thanks very much for the info! I have questions about this radios compatibility with a Wireless Training Mode called MASTER/SBUS I'm into this Wireless Training using the OTx Trainer Mode: MASTER/SBUS which passes the trainee's stick data thru the radio board to the model in flight. But: What I can't get Banggood or Radiomaster Tech support to answer are these question: if I insert a DIY 4:1MPM into the JR slot will it Bind with the Trainee's radio wireless link and work in this MASTER/SBUS mode in the normal FrSky D16 protocol or any other? Also, If ia T16S can support SBUS via D16 on the trainer link, can I use the T16S's "Internal MPM that comes standard in this radio with an ASSAN or a DSM2 mode Rx bound to the model's INTERNAL MPM radio link at the same time? Will this SBUS mode also work with the XM+ FrSky Receiver that's in a Linker II module? I have had the radio on Order since 23 March but it's delayed and not due to ship till 29May. This is important to me since currently I can't use wireless training with anything BUT models with FrSky Receivers in them and I have lots of other receiver types in park flyer models i do not needed to use telemetry with, but I'd still like to let my grandson's train on them too.

@Painless360

4 жыл бұрын

I'm playing with the wireless telemetry options at the moment and once I've figured it out, I'll make a video.. Stay tuned!

@jimsnodgrass8454

4 жыл бұрын

@@Painless360 Terrific! Thanks

Great video. Can this TX16S bind with Lemon RX7 plus reciever with stabilisation feature? TIA

@Painless360

4 жыл бұрын

See github.com/pascallanger/DIY-Multiprotocol-TX-Module for full list of supported protocols.. best of luck

Dose it support access protocol for frsky along with all the new frsky receivers

@Painless360

4 жыл бұрын

See link in description for where to find that.. Best of luck!

Thank you for your video support for this radio (TX16S), I have searched the internet but cannot find any answers to my question which is: As a lot of modellers are buying E-Flight planes with safe select and using the Spektrum tx how do you bind the AR636 6 channel receiver to the TX16S tx, I can bind but cannot get the safe select to work. I hope you can answer this questions. Thanks

@Painless360

3 жыл бұрын

If I had one here to test, I would. There are a number of Spektrum compatible protocols so I'd try all of them..

@cliffbrumfield7870

3 жыл бұрын

I am holding my Breath. Ha. I am sure you will be asked this question again. Thanks

How do you rate this radio after having it for a while is it the best?

When I work on the telemetry under widgets settings on the source, what does TRSS stand for? Is there a place I can go to find all the values for the abbreviations?

@Painless360

3 жыл бұрын

Trss is the signal strength of the d8/d16 protocols telemetry on the multiprotocol module.. I'm not finding a simple place to look it up.. yet

@albertherlicka4078

3 жыл бұрын

@@Painless360 I was hoping it had something to do with the transmission strength. I get a numeric display of 53 when I plug it in. I have no idea what the d8/d16 protocols do. I've been trying to get the read out of the battery in my plane but I use the dsm in my Valient and so far it appears I won't be able to get that displayed on my radio. ANy ideas would help, Thanks for your last reply

@Painless360

3 жыл бұрын

RSSI is the strength of the received signal. Remember to tune the radio for the best RSSI - see my video on multiprotocol tips and tricks..

Another tricky and challanging question, is it possible to use both the internal transmitter and the module bay transmitter?, so that you would kinda have a backup if something would fail?

@Painless360

4 жыл бұрын

Stay tuned, I have a video showing some of that...

@newbgonewild2216

4 жыл бұрын

@@Painless360 uhhhh thats cool i for sure will stay tuned =)

Does it support ACCST v2.X.X??? I see Radiomaster just came out with receivers that are flashable with ACCST v1 or v2 (EU and FCC also)

@Painless360

3 жыл бұрын

Yes. See my video on it.. Best of luck

Sorry if I missed it in the vid. Does it balance the cells while it is charging??

@Painless360

4 жыл бұрын

I don't think so. I never charge batteries inside something if they come out easily...

hi I purchased a radio tx 16s 4 in 1 protcol my question is how can I tell if I have this 4 in 1 protcol as I have a hobby m1 which came with shfss.Regards Andy

@Painless360

Жыл бұрын

kzread.info/dash/bejne/dpp_29ppqbfIiLg.html covers how to check .. Best of luck

Speaking of trainer mode: now that you have a multi protocol module, could you do a run-down on the wireless trainer using the multi module as the source? Have seen it’s possible, but have not seen anyone actually do it.

@Painless360

4 жыл бұрын

I am planning to show this, stay tuned!

Nice informative aswering... and thank you very much for that. But, as far as I have been looking for, I have not seen any review using the Radiomaster (or even Jumper T16 ) with 50cc or bigger size gassers airplanes. And that is a real shame, because both companies maybe are missing a huge amount of money. Radiomaster and Jumper should also aim, face up and shake strongly the big and more stabilshed radio companies in that niche, in my humble opinion. Greetings from south of Brazil.

@Painless360

4 жыл бұрын

In my experience larger scale pilots like to stick to kit they know and have used for a long time. Until this radio has a little more time under it's belt I wouldn't use it on my most expensive models either... Once I have that confidence then I would happily move up, especially if I was using the bay for something like Crossfire..

hi so out off the box,wat rx can you bind to,and is it mode selectable as i fly mode 1.thx mark.

@Painless360

3 жыл бұрын

See github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md for the protocols and modes are easy to change.

Hi good day to you sir, i am planing to buy a radiomaster tx16s but thier one that is holding me back. And that is the range, how far will it be for examlpe thr x8r receiver and the L9R. Could you please make a video of that

@Painless360

3 жыл бұрын

See my video on it in the playlist. I hope that helps.. Happy flying