A day after Christmas 2023 and I Just ordered a Ranger for my TX16S,as my old Happy Model ES24 pro TX was not wanting to update. I spent (actually wasted) a full day messing with it. But then it accidently got crushed by a large hammer and it ended falling into my recycle bin. It was a great feeling too!

I ordered the full ranger after your review of it! I’m sure I would have been well served by the micro but i figure I give myself some great future proofing with the big guy.

I'm glad I purchased the cheapest Zorro version, instead of paying more for the ELRS version. My reasoning was that in the future, if I did indeed venture into using ELRS I would have a much better selection of products to simply snap onto the back of the Zorro, products that have more options and higher power output than the built in module on the ELRS version Zorro. Now that Radiomaster themselves have brought out these modules, I'm so happy I saved that money. These look like a great option, not just for the Zorro but for all compatible radios.

@DudesonForums

Жыл бұрын

Zorro 4in1 and ELRS controllers always had exactly the same price to the last cent. If you were asked to pay higher price for ELRS version, that's a dodgy store right there. I'd never buy 4in1, absolutely no use for me. ELRS was the way to go, and when I wanted higher power output, I simply bought this nano version which is totally inexpensive. Of course, it's additional expense... but I do not use it with Zorro only, I slap it on my Tango II since it's 3 times better and higher quality controller than Zorro. That way I can still use it when flying my ELRS quads. So, no... ELRS version of Zorro was definitely not a waste of money. It costed exactly the same, $179 CAD for 4in1, $179 CAD for ELRS version. If you don't believe check Rotor Village for the pricing. And it was always like that, never changed.

pretty impressive results so far - especially the IR images and the frequency analyser spot on 13:23 Outstanding level of review - the depth and amount of points checked up to the radio heating after 30 minutes. Not sure where to go cause Zorro and TX16S need different modules as there is not really an adaptor so far. I love these displays on the back but not worth considering that I might be caught and need to get one of each. Hope the affiliate link will work for you. Just to let you know: as for know radiomaster seems to have found a way around the usual EU customs that would not allow to ship them to the EU due to missing CE certification and no LBT feature. Mine was rejected before, the full radio incl. elrs but somehow my buddy had gotten his this week via a different country so they must ship them throughhh a loophole into the EU and from there to the customers EU country cause otherwise it would end up the same way. Therefore I will try one last order this week and hope it gets throught cause each time I have to go to the customs costs me 2 hours at least driving, waiting, disusccing and fighting and driving home which is always a mess and is already a trouble maker cause usually if I have to appear it is about radio frequency and certificates and mostly those that are forbidden. Right now it looks they have find a way but not sure how long this gap might be open. Chapeau for your outstanding review.

My CTH ALBATROSS 46" is going where man has not gone before, thanks for the vid.

@Mad's Tech this is not only great review but I do like to listen youe British accent which is very nice. Thanks for great work - Micro Module bought 👍

yes, I probably have to have this too, I have crossfire 915 and beta 915 and namino 2.4 but I probably also need this in my collection, the big one I have to have 👍 Bigger is better they say 😂

@wearemany73

Жыл бұрын

The big one’s cnc aluminium too..🤤

Super dooper review. Thank you Sir. 😊

Fantastic review, Ian! Thanks for all the testing! 😃 Sorry, I couldn't watch yesterday... Too many things at once here and I'm going to travel during the weekend, so... 😬 Anyway, stay safe there with your family! 🖖😊

New handwarmers yay

Some people were affraid of ELRS because most reliable stuff was made by Happymodel and they know how reliable Happymodel stuff was in the past. But most people trust their RadioMaster radios so this should be an absolute game changer!

@Arthur4all

Жыл бұрын

just bought a Mocro TX + 3x RX bundle for my 2nd radio! Only $60! What and absolute steal!

@abertheham

Жыл бұрын

I agree with your point in full, but I’d just like to throw out there that my HM 2.4 pro module has been flawless, even though my smoothbrained-self forgot to put the antenna on it for a good 10 minutes on at least 2 occasions. Not supporting or dissuading either product - though admittedly I’d probably go for the RadioMaster today (and will if my HM ever let’s me down) - just saying, sometimes the loudest voices are those that are most unfortunate and upset. HM ELRS has been great for a lot of us, so we spend time complaining about other things in FPV. Plenty of frustrations to go around… 😂

@Arthur4all

Жыл бұрын

@@abertheham to be fair, I've also had a good experience with Happymodel. My Mob6 still flying since the start of human malware in 2020 and all my current quads are on HM EP1 or EP2 controlled by Namimno module, but I went and ordered RadioMaster module with 3x RX for my 2nd TX16S 🙂

@___echo___

Жыл бұрын

@@abertheham in my experience HM hasn't been bad when it works, but the issue has been more things not functioning on arrival lol

I am quite suprised that they use 2 different pcbs for jr and smaller tx bay, especially after looking at nano tx.

11:10 Wow! FAA is not happy about that! 🤪

Hi sir. just want to clarify a doubt from you. Rather that buying Boxer TX internal ELRS version(140$) can i buy cc2500 version which is (100$) then buy external ELRS micro module (40$) which costs the same and gives more optional protocols at the same time. and need to know whether both internal ELRS and external micro ELRS module specs are same and acts as same or will there be any cons in perfomance?

Hi Ian. Do you have any idea if RM is going to make the 900Mhz version of these modules?

Great review as always. Question Elrs uses 2.4ghz. Here in Brazil some prison uses cellphone blocks. Where I fly has a prison nearby. For that I can't use any 2.4ghz radio I try Futaba, Spektrum, and Frsky. My radios today. But I need to move to Jeti radios. I will try 900mghz. Do tou think the Elrs will work in my case?

Tbs just released their v2 gimbals on their site only a few hundred sets available. Be quick

Can you please do a power draw test for the ranger?

I currently have a happymodel module on my Jumper T-Lite. So I have already installed the power distribution board that came with that, but I'm not sure if it would support this module. Any thoughts on this?

Awesome review! 👏👏What was the VSWR on the Moxon Antenna at 2440 and 2480? I did notice a lot more heat on that antenna, just wondering if the VSWR was higher than the dipole?

@MadRC

Жыл бұрын

It’s the chipset heat creeping to the connector. You won’t feel any power form RF below a few hundred watts. I have tested it on the vna though it’s fine.

In your thermal shot, it looked like the Ranger Micro was in a TX16S and being powered by just the bay. Was the TX16S a MKI or MKII unit? Are you sure the lower 1W measurement wasn't due to it being starved for power? Thanks!

How dose the zorro fit in radiomaster case with module on back and antenna ? 🤔

Can we remove UFL and RPSMA connector from micro module and replace it with UFL T antenna that comes with radio master receivers ? That way I can fit my TX16S in its box with the flexible UFL antenna. Please let me know.

Does the micro provide the ble joystick feature?

Have you done a range test with these modules??

i have questions. i found tx16s mk2 elrs can run 500mw after adding data on hardware.html like ranger did, can you test it how stability it can after playing half hour？

amazing review...what about for 915/868MHz modules? Hope that RM can take those one in account

@ddegn

Жыл бұрын

Agreed.

As you are UK based , could you do a video on the ELRS 100mw limit in the EU as all videos on receivers and transmitters are US centric. What's better for penitration between ELRS / Crossfire or even DJI 03 Air RX/TX at that power.

Will the nano fit the frsky x20 ?

Ok now retest with the 2W power hack!

Does anyknow if it would fit on tango 2?

So Am I correct that the big ranger one actually comes with a jr and also a nano adapter, so technically it could go on a zorro if it’s not to big and you had a external power supply. Ps keep up the good work mate.😊

@6.5creedmoorrips6creedmoor2

Жыл бұрын

Yes comes with both adapters

What are the chances these will accept Mavlink protocol?

Question: When you attach one of these ELRS to for instance the controller beside you, does the RF circuit of the controller deactivate? Or do you have two active antennas radiating?

@MadRC

Жыл бұрын

No on your radio when you enable the JR bay the internal module will power down.

Dorky and 40 says that using an external battery to the xt30 will burn it up. Is that still a thing? I just oredered mine today then saw the video afterwards

@Seii-FPV

Жыл бұрын

Everything was immediately updated with V1.6 PCB. New batches absolutely have no problems. I can confirm, I purchased it two weeks ago and opened it to see it's true.

The review from Oscar Liang also found that the micro module also underperformed compared to the others.

@glidesfpv

Жыл бұрын

Radiomaster responded to him saying they must have sent him a dev product that wasn’t intended for release by mistake as it should have always hit 1watt output. That or it was just defective.

@REDROBRCFPV

Жыл бұрын

@@glidesfpv I read that but it just seems like a convenient excuse lol

@glidesfpv

Жыл бұрын

@@REDROBRCFPV definitely 😂 I’m sure they will hammer it out though. RM is normally good stuff.

I bought the Zorro and the Nano module. I can't find any information about how to set them up and get them working. The module came with zero documentation.

@MadRC

Жыл бұрын

Just flash them in ELRS configurator

Will Ranger Nano 2.4GHZ ELRS Module support Tango 2?

@MadRC

6 ай бұрын

Yes

@outboxfpv4360

6 ай бұрын

@@MadRC Do u we edge tx on tango? Will it work with opentx?

Might have to switch from crossfire to this?

@fpvfun922

Жыл бұрын

I don't think so.

@jimmytheriot8978

Жыл бұрын

@@fpvfun922 You're right I'm pretty happy with my crossfire

@Arthur4all

Жыл бұрын

I did that long time ago and never looked back!

@Raven187FPV

Жыл бұрын

Crossfire is lagging very far behind now.