Thank you for your help.

@MilneFPV

3 ай бұрын

You're welcome! Thanks for checking out the video!

Great video. I need to change those out now. Thanks for the great detail.

@MilneFPV

10 ай бұрын

You're welcome! Make sure you have your readers!

Thank you for the video! I need to swap my springs out and this will be invaluable

@MilneFPV

11 ай бұрын

You're welcome! The first side went really rough, thought I might break something. I thought others might want to know how before they take everything apart.

Thanks so much for the explanation and good close-ups.

@MilneFPV

3 ай бұрын

Thanks for checking out the video!!!

hey bro, awesome video, how do you shoot the top down in your videos? looks good :)

thanks for your help!

@MilneFPV

10 ай бұрын

You’re welcome, thanks for checking out my video!

Ooh, I might have to end up doing this. I ordered their stick risers, so the leverage of a taller stick might be enough of a change for me. But I'll keep this in mind. Super informative

@MilneFPV

10 ай бұрын

Nice! Those stick risers might end up working out pretty well for you. One thing I like about my Boxer Radio, is that it has longer sticks, which gives you a little more resolution in the inputs.

Just got this radio; its my first FPV/Drone radio. I did not like how tight the gimbals felt, even using the screw adjustment didn't offer sufficient range to lower it. Your video helped tremendously, mostly because I did not know that radiomaster shipped lighter springs.

@MilneFPV

3 ай бұрын

Glad you found it helpful!!!

Great video 👍

@MilneFPV

6 ай бұрын

Thanks for checking it out!

I also wnated to know what's the difference between adjust the trottle stick tension (B T) and the vertical stick tension (C UP-DOWN)? It is in the picturre you showed in the beginning of the video, Thank you so much 🙏

@MilneFPV

10 ай бұрын

If I remember right B T does adjust the feel of the throttle also, but it is very minor. When looking in the radio, that screw is at the top of what looks like a leaf spring that lies over the top of the "cam" (not sure the actual term) that is attached to the throttle. When screwed down that leaf spring applies tension to the cam which makes the throttle feel slightly tighter. Think of the "A" spring enabling/disabling self center, and the BT adjustment adjusting overall smoothness/tightness. Imagine disabling the spring with "A", the "B T" adjustment will resist the throttle wanting to flop down when you take your fingers off the stick. Both the C (Up-down) and D (Left-Right) adjustments are labeled as adjusting stick tension, but what I found is that the really adjust return to center strength, and when loosening them, the sticks don't want to return to center, and they end up feeling very sloppy. Not sure why they are labeled as such. They seem like you can get a little adjustment out of them, then you hit a point they don't do anything but make your sticks feel like they're broken!

Great clear instructions for this. But I noticed there are 2 springs for each gimbal. But there are only 2 replacement springs in the box? Are you just replacing one of the springs on each side? Thanks for the tips

@MilneFPV

10 ай бұрын

Hi, thanks for watching! 4 springs come in the little bag in the box. I replaced 2 springs on the throttle/yaw side before I filmed the video. That way I learned the best way to do it and could show how from the start!

Thanks bro i adjusted my gimbals out the box but there was a massive deadzone i had to put in liftoff witch was screwing with my flying ill have to try swap those springs. My only question is… are you sure those weren’t just extras and there exactly same as stock? 😅

@MilneFPV

10 ай бұрын

Yeah that's exactly how mine felt after adjusting, they should call it return to center strength! I like how you think, because I also was skeptical that they wouldn't be softer. When I removed the first spring I did a side by side comparison by pulling on the old and the new one. The ones included in the package were noticeably softer, and not trusting my self, I did a side by side comparison after I did the first gimbal. Not only was the side I swapped softer, it makes a much different sound when allowing to center on it own. Also, Radiomaster includes a list of what is included on it's website, and it lists 4 x Low Tension Springs. Thanks for checking out this video!

Please make vedio radio master pocket stick selfcenture how

Is there a way to put a spring in the throttle? Mine doesn't feel like there is a spring in the trottle, the gimbal just go up and down freely

@MilneFPV

10 ай бұрын

Great question! The throttle already has a spring installed for self centering, but it is disabled. It's very easy to enable the spring by doing the following: Flip your radio over and take the rubber gripper off of the throttle side, and you'll see a hole marked L-R. (Labeled "A" in this image 0:15 ) In that hole is an Allen Head screw that enables/disables the throttle spring. Insert a 1.5 mm Allen Wrench/Driver and rotate counterclockwise (it has to be almost all the way out) to enable the spring. You'll also have to check the hole labled "C" in this image 0:15. This is the tension adjustment for the throttle spring and if it is unscrewed all the way, your throttle will still feel like it doesn't have a spring. So make sure "C" is screwed all the way in and then back it off to find the throttle tension you want.

Do you know if they have upgraded gimbals

@MilneFPV

5 ай бұрын

That's a great question, I have not seen any upgraded gimbals for this yet!

I like a lot of tension in my springs and already have snapped three playing X-tris over 10hrs last week, seems the original set didnt last, im on my second set and looking for alternatives like braces rubber bands to replace the springs with, they seem too delicate.

@MilneFPV

9 ай бұрын

Dang...guess you found the weak point! Hope you get it figured out!

@DuncanStewartPhoto

9 ай бұрын

yeah we'll see, i contacted RM, first time with a product so hopefully their Customer service is cool@@MilneFPV

@DuncanStewartPhoto

9 ай бұрын

Radiomaster told me they can send them for free but its going to cost $5 for shipping, at this rate I'm going to need new springs every week if I use this controller normally. Oh well, that's why it's $65.@@MilneFPV

you sir is crazy! lol jk

Is it normal that the SA und SD buttons trigger fairly easy? I can just touch them and the light in the RC goes green so it is triggered. In reviews it doesnt seem like it doesn trigger that easy

@MilneFamilyLights

8 ай бұрын

I just tested mine and they are very sensitive. There is a little tension on the buttons, but they only have to move about 1mm before they trigger the light.

@DoktorSkill

8 ай бұрын

@@MilneFamilyLights Thanks for your test :) yes noticed that too. I use pinch grip and rest my fingers on the 3 way buttons, that way i accidentaly press those SA/SC buttons sometimes slightly and see the green light. And as soon as the light is on, the button in betaflight counts as triggered. Thats a little concerning imo for things like arming.

@DoktorSkill

8 ай бұрын

@@MilneFamilyLights if you just touch the button on the outer edge where the button sticks out the most, you just need to barely touch them on my radio to trigger it.

Are u meant to change all 4

@MilneFPV

10 ай бұрын

Yes, they give you 4 springs, so I would change out all 4 (Throttle, Yaw, Pitch, Roll). I changed 2 on one side before I made the video.

@user-yk1cw8im4h

10 ай бұрын

I finally changed them and the stock ones are definitely much shorter (less coil = higher tension) so ur are right. Now my flying is much better.

@MilneFPV

10 ай бұрын

Nice! Glad you were able to get them swapped out!@@user-yk1cw8im4h