Radiator leak repair using JB water weld
Автокөліктер мен көлік құралдары
This vlog is about fixing my Jeep Liberty Radiator Leak. The Leak is coming from the plastic part of the radiator. I use JB water weld that I bought at Canadian tire. JB weld have different types of product like for extreme heat, for steel, for plastic. Jb water weld works on, fiberglass, PVC plastic, copper, brass, iron and aluminum and can resist water, oil, gas, diesel, hydraulic fluids and other chemicals with the strength of 900PSI and can withstand 300°F. My initial try failed but after my 2nd try and pressing JB weld hard to penetrate the crack of the plastic then let it cure for 24 hours worked. This is actually done last year and no problem with the leak even after 10,000km run.
Пікірлер: 62
Real time video with miscalculations, then rectified…well done.
@GePete
Жыл бұрын
thanks
Saved me 350 bucks and i paid 10 bucks for that stick no more leaking coolant I let mine sit for hour and a half that stuff is hard like a rock
@GePete
Жыл бұрын
yes, it really works. i always have it in my car for emergency
@The-Man-Right-Chea
3 ай бұрын
Does it withstand the Heat when coolant gets extremely hot????
@JimmyBoy87
3 ай бұрын
@@The-Man-Right-Chea yes it’s been almost a year no leak still but I do plan on changing the radiator if it leaks again but for now I’m good hope it stays that way until I trade it in 😅
@The-Man-Right-Chea
3 ай бұрын
@JimmyBoy87 I just was another guy using the JB WELD High Heat which they say is much stronger. So I'm going to try it since I'm using on a semi truck 🚛
@ricardo07serrano96
3 ай бұрын
@@The-Man-Right-CheaI just bought the water weld for a small crack on my radiator I was gonna get the red job weld how’s it working so far
Yes. Thumbs up Thanks Brother
I'am Your Newest Subscriber Great Videos
@GePete
2 жыл бұрын
Thanks for subbing!
The 2 part is a tremendously better product than the sticks.
I think that works beter then JB radiator weld, ironically👋
Im Bout to try this myself on an Altima will be back in a week to see if it worked for me as well. Great idea man.
@erickespinosa9466
2 жыл бұрын
Did this work for you?
@drecarter694
2 жыл бұрын
Ya bro lmk sum , doin tht shit on my Altima too
@DARKthenoble
Жыл бұрын
Oh shit, he dead
@samuraiastronot3090
Жыл бұрын
Did it work
@ronjose51
Жыл бұрын
This foo never came back
My ladyfriend got a leak between the top plastic tank and the crimp that holds the top onto the coils. I’ve swapped out many radiators, so like a dumbass I volunteered to change hers. Little did I know that on a ‘05 Mazda 6S (3.0L V6) the WHOLE FRONT END OF THE CAR NEEDS TO BE REMOVED TO GET THE RADIATOR OUT! Going to try the Water Weld today because @% that! Will update.
@GePete
Жыл бұрын
as long as you have access to the leak. you can fix it with the water weld. goodluck
@FlatOutNorth
Жыл бұрын
I love mazda but yeah thats too much
I'm going to try this on my is300 heater core return pipe. The whole dash has to come out to replace it so I'd really like to not do that.
Is JB much stronger than metal epoxy adhesive, which is a mixture of two adhesives (hardeners)?
@GePete
4 ай бұрын
im not sure with metal epoxy adhesive cause i did not try it yet. I used water weld because of liquid/coolant in the radiator.
Is this only for the plastic part of the rad or I can be used on the iron/steel/aluminum portion as well? I have a crack on top of my rad and want to know if this is the right one to use.
@GePete
13 күн бұрын
Im not sure if it will work for that. JB weld have different products for metal.
It’s been one year did it leak or bot
@GePete
10 ай бұрын
I sold it last year to upgrade to truck. For 1 year of use after i fixed it, i did not see any leak
Ok but did you shut off the engine and check if it leaks again ?? When the engine is shut off the pressure builds up alot more than when you're reving the engine at 4000 rpm!!
@GePete
Жыл бұрын
yupp, it did not leak even the next day when i left a bucket underneath and check it.
@zztop8592
8 ай бұрын
The real test will be after 2-3 weeks of driving.
@vicc3337
2 ай бұрын
Pressure does not build more when the engine is off....
I put this on my explorer 3 days ago. How did your get hard in a hour. Mine is still soft even after days?
@GePete
2 жыл бұрын
It dried up after hour but when i started to check. It still leaked. Maybe it dry outside but inside, it was contaminted with coolant. So i darined the coolant then reapply, you will see the failure with 1hour and the good result of 24 hour curing if you watch the whole video.
@td-12kx53
Жыл бұрын
You just didn’t mix it good enough. The activator Needs to be thoroughly mixed
@arkwillingham2182
Жыл бұрын
sounds like ED has set in strong for you........................
lol yeah let it sit longer
My leak is in the top corner on the inside where one of the tubes goes into the side. Very hard to get to on account of the cooling fins. I hope this stuff holds up because a new radiator for this thing is $200 and has to be ordered.
@GePete
2 жыл бұрын
good luck. i hope it is a plastic component. i drain all of my coolant for my second try then cure for 24hours
@omnilife6660
2 жыл бұрын
@@GePete sucks having to purchase new coolant every time just for tiny little leak
Yeah this definitely falls under replace, don't repair category.
things people will do to avoid buying a new radiator
Did you repair a metal part or a plastic part
@GePete
19 күн бұрын
Plastic part only that have leak
I've got the same leak on my liberty 😂 great video
@GePete
2 жыл бұрын
have you tried this? it works
@knuxklez27
Жыл бұрын
lmao so do i !! i’m trying this today 😂😂
How long did it hold?
@GePete
2 жыл бұрын
did not see any leak even after 1 year sadly, i sold that jeep
@redstreet7704
2 жыл бұрын
@@GePete Mine never held with stop leak so I bought some JB Weld and that leaked too. I bought and installed a new radiator so far so good.
4 minutes 40 seconds There was a coolant leak, but how many hours did you start the engine after work?
@GePete
2 ай бұрын
After the first mistake and re doing it, i let it dry for 24 hours, refill with coolant then start engine.
@tayoni800
2 ай бұрын
@@GePete Now, isn't the coolant leaking?