R53 pull after Cam install
filmed in mexico
06 r53
17% pulley
alta intake k&n filter
obx 4-2-1 header catless
invidia exhaust
catcams 469 cam
550cc injectors
st-x coilovers
donald the bonald control arms
powerflex lca bushings
superpro inserts on trans and lower engine mount
etc etc..
tuned by adriancl
Пікірлер: 51
God it sounds beautiful 👌🔥
@TehAirsoftNewb
3 жыл бұрын
appreciate it brother! its a fun car.
Nice build!!
that supercharger sounds class
On my to do list for sure
@TehAirsoftNewb
3 жыл бұрын
its a worth while mod.
Sounds great I am waiting to install mine...did you have to ding the spark plug tubes for clearance? I heard the 469's fit without needing to?
This goes well! Going to be swapping out my Newman ph1/2 piece of crap for a Catcam, 469 is probably what I will go with to. Looks quick!
@TehAirsoftNewb
3 жыл бұрын
whats wrong with your newman?
@michaelmorley7678
Жыл бұрын
I just installed a newman ph1/2, its about the same as this pull video. Love the driveability and power
Did you have to play with Timing marks ? For the bigger cam ? Also your running spring and Retainers? Thanks sounds nice
What catcam are you running 469 ,465 ? Car is amazing, I have had two r53. Great vid.
@TehAirsoftNewb
Жыл бұрын
this is a 469 thank you.
Sick pull I wish my r53 was like that. Also what that phone mount? im looking for one for my r53
@TehAirsoftNewb
2 жыл бұрын
hey bud - just a few mods away from it going like mine ;) the phone holder is a pop socket mounted on the phone with a popsocket brand holder. they are ~14 dollars a piece on amazon. love it.
@jeremyocampo1529
2 жыл бұрын
@@TehAirsoftNewb I mean I have a borla sports exhaust, 15% pulley reduction, cold air intake. And that’s it
Where did you get the black speedometers? Btw sick car you got there
@TehAirsoftNewb
Жыл бұрын
they are replica GP faces. don't know if you can buy them anymore.
Your R53 seems to run strong and sounds really good! Are there any emissions issues with that cam? I have to pass emissions every other year to register my car.
@TehAirsoftNewb
8 ай бұрын
really gonna depend where you live. where I live I can get away with an OBD check. as long as I have a cat and no check engine light, I pass.
@ghostwrench2292
8 ай бұрын
@@TehAirsoftNewb I'm pretty sure that's how it is in my locale. As long as all monitors are set and no CEL, I'm good. I know some tunes turn off the rear O2's but then the monitor will not set and the car will not pass. Also, is that cam on your stock head?
bro ur car seem super fast. how is the maintenance of getting the catcam? wonder if there are any side effect?
@TehAirsoftNewb
3 жыл бұрын
yes - the cam has a pretty decent overlap so the idle is rough compared to OEM. more difficult to drive in stop and go traffic.
@lunlun2930
3 жыл бұрын
@@TehAirsoftNewb besides that, any downside on the engine? like damage the engine
@lunlun2930
3 жыл бұрын
@@TehAirsoftNewb sorry for asking so much cause i really new to cam. i just got my r53
@TehAirsoftNewb
3 жыл бұрын
no damage to the engine. My engine is lowish miles (below 100k) with supporting mods. my car sees 7k rpm hitting limiter fairly regularly. stock valve springs, JUST the cam. obviously if you install it incorrectly there will be problems.
@lunlun2930
3 жыл бұрын
@@TehAirsoftNewb hahah. what are the chances to install it incorrectly? it really feel fast with cam and supporting mod.
How's the low end with this cam , trying to decide between this and the 461
@TehAirsoftNewb
3 жыл бұрын
feels like OEM, i dont spend much time at low RPM
Did you have to do any adjustments with the spark plug housing getting in the way of the lifts on the can shaft? Or was it a straight install.
@TehAirsoftNewb
10 ай бұрын
had to ding the spark plug tubes slightly.
What can is that?
is 469 suitable for daily drive + casual spirited driving?
@TehAirsoftNewb
2 жыл бұрын
after driving my stock cam R53 I would say no. I like the down low torque too much of the stock cam.
Did you have to change anything else in the head for the cam?
@TehAirsoftNewb
3 жыл бұрын
nope - stock head just with a catcams 469 installed. took an hour and a half, i am super familiar with these vehicles.
@rickynelson9647
3 жыл бұрын
@@TehAirsoftNewb ok awesome I wanted to get a cam. How much power do you think your at ?
@TehAirsoftNewb
3 жыл бұрын
@@rickynelson9647 with supporting mods, i would venture a guess around 215-220whp. not really sure, need to get the car on the dyno. who knows, maybe its only 180whp lol
Can this cam be simply dropped in or does it require a tune to the ECU. THNKS
@TehAirsoftNewb
Жыл бұрын
needs a tune. basically won't idle without one
@c-los4630
Жыл бұрын
@@TehAirsoftNewb How do you tune the ECU on an r53
How much power ?
@TehAirsoftNewb
3 жыл бұрын
no idea. maybe 215-220whp. MAYBE.
Where can I get a hold of the tuner?
@TehAirsoftNewb
3 жыл бұрын
i contact him on North American Motoring under the username adriancl
Shame it's not a real mini . Hate these new bmw
@Master-tl9sc
Жыл бұрын
Lmao it’s a first gen mini yes it’s still a “bmw” but it’s way better than the new new ones