BMW did an excellent on the fusion and the supercharger exhaust. It puts a warm feeling in my heart. It goes with the car but at the same time you wouldn’t even think a car like this would sound like it

i miss this sound! my civic is fun but too quiet

the "i was born to live in a doublewide" mod

@SeanOwens, hey i have a 2002 mini cooper S. The left muffler is the muffler with a leak along the seam. Any suggestions as to what i should do. Get a whole new exhaust or try look for a single in duel out muffler ?

@drfizz2k1

7 жыл бұрын

Ben Marshall do the one ball mod. it sounds good and isn't too loud and is cheap.. the left is the muffler that is removed.

@drfizz2k1

7 жыл бұрын

my mistake... it's the left you keep.. you could just get a used one from a scrap yard.. or many groups on facebook.. you think you want to spend money for a loud exhaust but really, you don't. you don't want to spend on something for others to hear.. keep it cheap, find a solid used one and go one ball

@drfizz2k1

7 жыл бұрын

Ben Marshall check out the sound... kzread.info/dash/bejne/npN5yMuzetTAgMo.html

Sounds good! How long to do and any extra tubing or just un bolting?

@drfizz2k1

8 жыл бұрын

+✱AT Productions✱ most exhaust shops will do it for less than 100 bucks. you just need a 45 degree bend welded in. 2 cuts, 2 welds... www.ross-tech.net/andy/mini/oneball.gif

@AdmiralRustyShackleford

8 жыл бұрын

There's a video a guy posted of the shop doing his, and they use a 90 degree bend. Did you just have them cut as little as possible to use a 45? A friend of mine wants to do this since his resonator is getting rusty, so I was just gonna get a 45 or 90 degree mandrel bent piece from my work.

@drfizz2k1

8 жыл бұрын

+snakesonaplane2 correct, I used a 45. saved as much factory pipe as possible

@drfizz2k1

8 жыл бұрын

+snakesonaplane2 kzread.info/dash/bejne/npN5yMuzetTAgMo.html the sound after

@Boosteds550

8 жыл бұрын

+Sean Owens check out my video on my channel I did full custom exhaust and it sounds so good!

Very nice I have the same

Did you still have a resonator?

@drfizz2k1

7 жыл бұрын

brandon maxwell no, that's what this mod removes. stock muffler still though

@brandonmaxwell364

7 жыл бұрын

Thanks! Just got mine done today, sounds awesome

I want to do this to my 2006 R53, but I am hesitant. How do you like the results? It sounds great in the video. I guess my major concern is that I don't want the car to be obnoxiously loud. Louder than stock is fine, I just don't want to sound like a ricer going down the street.

@drfizz2k1

7 жыл бұрын

Green Buffalo it's perfect... not loud inside at all.

@greenbuffalo2854

7 жыл бұрын

Thanks for the fast reply! I will comment again once I get it done!

@quackerz312

7 жыл бұрын

Green Buffalo well did you do it? lol

@greenbuffalo2854

7 жыл бұрын

Rich Noble not yet... Heat exchanger gasket, front ball joints, high pressure line for the power steering, timing chain tensioner, front pads and rotors, and tires.... but damn it's fun to drive!!!

@quackerz312

7 жыл бұрын

Green Buffalo how come you havent done it yet? because you did all those first? and yeah they are fun i love mine i just got it last week

Why my r53 won't burble :/ it's weird

@drfizz2k1

8 жыл бұрын

+Pepe Beltrán this video is my car, 2003 r53..

@dacasman

6 жыл бұрын

You were right. 2005 and up. I put a 2005 ECU in my 2003 and it pops and burbles a LOT more.

@landnmarine2012

5 жыл бұрын

they all have the same engine just the 2004-06 has 10 extra hp i have an 03 and it pops all the time

@xsandpathx

5 жыл бұрын

@@Peponnkkss facelift was 2004 summer anyway mate

@andrea_jdm_zanon

3 жыл бұрын

@@dacasman where did you find the 2005 ecu?