This is one of the best "Butler" videos I have seen. You are an excellent teacher. Thank you for taking the time to help us.

This was interesting. Even though I'm not getting a longarm, I love to listen to Becky teach.

Great video. So great to see you using a King Quilter and the Butler. I have a Butler on my Tin Lizzie (about 12 years old) and I love it. Enjoyed this very much.

These tutorials have helped me become better familiar with the Butler system on my machine than any others I've seen so far. Thank you, Becky.

@PowerToolsWithThread

2 жыл бұрын

Great to hear! Take a look at Kim Stotsenburg's channel on KZread too. She has some good videos. kzread.info

Becky, thank you for your videos on the Butler! Your teaching is so enlightening for me. I just bought a long arm with the Butler 3 months ago and you have taught me so much to be able to have the confidence to keep going. Thank you again! ❤️

I wish I had the room for. Long arm. I love the quilt pattern.

Thank you sooooo much for the link to the scissor pen. Bought 3 different ones and not happy. Also your video s the most information on the QBOT Butler system. I love ya! You have helped me so much. I bought the hammock you mentioned too. I chose the Qnique over the King quilter. God bless you!

This was very enlightening. I’ve watched long arm machines stitch before but never watched the initial prep. Very cool; thanks for sharing !!!

Great information thank you

Wow! And I thought edge to edge quilting had a learning curve! Very interesting but definitely doable….

While I don’t have the butler for robotics I found this super helpful. I find it difficult to figure out quilting that’s not e2e. I like seeing how you broke down your quilt by shapes to decide on your quilting. My robotics can do similar by isolating a particular shape. I look forward to more longarm videos if you decide to do more. Personally just seeing someone going through the process I pick up all sorts of insight and how to improve my process. I appreciate all the hard work you put into educating on KZread.

The toggle cord is a great idea!

I do so enjoy watching you while I hand quilt! Thank you for sharing your time and talent!

I have the butler and found your video very inspirational, keep them coming

Sending a big thank you and a hug. This video was so helpful. I will watch a few more times and take notes. There were so many things I learned. Mega thanks.

@PowerToolsWithThread

2 жыл бұрын

That's great! Glad to help.

Think I have the same setup as you…a Grace frame , a Power Quilter 3 which is also the Tin Lizzie and the the EZ Quilter robotics. There is a little bit of a learning curve as there is with any machine but I find it very easy to use. I’ve had it about three years with no major problems, just user error. I started watching this video earlier but paused it to see you and Keith live with Russ. Really enjoyed the show with the woodworkers! Now back to this show.

THANK YOU SO MUCH! You are awesome Lady ….

Enjoy this video I just got the bulter

This video was so helpful, thank you

I loved your video…. Don’t want a king arm but I like learning and it helps us understand what happens to our quilts

Thanks for this video, I was dying to see you on the long arm. So interesting, I loved it

So cool. I don't want a longarm (don't even have the room if I did) but it is endlessly fascinating. When I'm at my local quilt shop, I always go back and watch them quilt. I'm easily entertained.😀

@PowerToolsWithThread

2 жыл бұрын

Me too! I love to watch them work. lol

Thank you so much Becky you helped me so much I don't have a butler but it is some of the same when you quilt with a machine I so so appreciate your tutorial thank you so much

Thanks for sharing. I don't have robotics yet, but this will be so very helpful when I am ready.

Hey Becky, Love your video. When you are at the beginning instead of putting in your area pattern box (size of fabric) you can just hit the "+ "2 times and it will give you a default box size. After you have stitched your line for your top placement you can hit layout and then input your actual quilt size for your quilting pattern. I hope this helps. (Someone else may have already put this in the comments, but I didn't read all of them. Sorry if this is repetition.)

@PowerToolsWithThread

Жыл бұрын

I no longer have that system and have switch to QCT Pro.

@kimdamico8083

4 ай бұрын

Hi Becky, curious did you find the butler difficult ? I’m thinking about buying this for my king quilter elite2, would love your input , thank you 😁

The pioneer woman has fabric at walmart now, check in your area if you have time.

Not a long arm quilter, but this video was fascinating!

I use QTC. They call things like the first area Safe Zone. which is the size that the machine can quilt in top to bottom. Then you can set the actual quilt size within it.

I have the pro stitcher and wish I could find a video that teaches that as well as you just did with this one!

Hello from Ohio

Can you do all the feathers across on one direction, then come back to start and then do the other feather triangle across the quilt?

I have a border that’s not even across how do i trace the strip the pattern goes in?

@PowerToolsWithThread

Ай бұрын

This should help. kzread.info/dash/bejne/X3aplbyzm7vOlbA.htmlsi=27PQYgY6psiPLdTh

Hi question what is the best product to use with applique pieces? and the best way to use when cutting out with scan n cut? thanks Laurie

@PowerToolsWithThread

2 жыл бұрын

I use HeatNBond Lite. I use the Low Tack mat (aqua colored) with fabric side up/hnb side down/paper off.

Did you loosen the belts when you started basting?

@PowerToolsWithThread

2 жыл бұрын

No, I always left my belts tight. I just got used to it.

DO THE MAGNET ON YOUR TOP COME IN MORE COLORS THAN JUST PINK?😊😊😊😊

@PowerToolsWithThread

2 жыл бұрын

Yes, they have many colors.

When you do the baste stitches, you disengage the robotics? I do but not sure. Thinking you don’t need to drag robotics all the way? Haven’t forgot the email I’m going to send.trying to do maintenance on my machine and had thread issues with this poly thread that was awful. Went back to glide, no off brand for me. Too much headaches.asking I need help in nesting! Ty

@PowerToolsWithThread

2 жыл бұрын

I think the trick to nesting is to move the machine to the very bottom of the previous row of stitches BEFORE you tap the Nest button. Then it all seems to work. That's the step that has been left out of the manual. Then follow the prompts. It will feel like you're tapping OK out of sequence and ahead of the next step, but oddly it works.

If you need suggestions for other long arm videos I've got hundreds...lol. I am looking for the elastic centering and edge toggles. I couldn't find them. Please let me know where to find it.

@PowerToolsWithThread

2 жыл бұрын

Here you go. amzn.to/3gtyM2m

Can’t find how to order magnetic scissor holder

@PowerToolsWithThread

2 жыл бұрын

Sorry! Here it is. :) www.stitchintree.com/shop/Notions/PinPals.htm

Can you do a Lovey on one of your videos.?

@PowerToolsWithThread

2 жыл бұрын

I'm not sure what that is.

@cathyc6935

2 жыл бұрын

@@PowerToolsWithThread It is a stuff animal attached to a triangle baby blanket. I love to make some like they have on Amazon. Thanks

Do you no longer have this system?

@PowerToolsWithThread

9 ай бұрын

No, I now have Grace QCT 5Pro.

@KPAfterHours

9 ай бұрын

I thought so. I was considering Butler. Now I have seen QCT5 might also work with HQ machines. Do you know?

I was so confused. I understand too left corner. But then it says top right corner. I was doing too not the bottom of corner box. Duh want a challenge