QuickTip: Handle quick release pins (MILWAUKEE PACKOUT ROLLING TOOL BOX 48-22-8426)
Тәжірибелік нұсқаулар және стиль
#Packoutsystem #handle #quickrelease
Here is a link to order the PackOut from OPT:
shrsl.com/29vxg
You can get the quick release pins and the pin locks from us at:
shop.jakeofall.com/products/q...
WE HAVE NEW PINS that are easier to install see the link !
or if want to print the pin locks you can get them right from Ben's site:
3dprints.electronsmith.com/qu...
Head over to @thejakeofall on IG
Check out the Kaizen Foam @
kaizeninserts.com/
One of the best designers of 3D Printed Tools
workshop.electronsmith.com/
Let's be SOCIAL!
JakeOfAll on Facebook: / thejakeofall
Our Garrett Farms on Facebook: / thegarrettfarms
Instagram: / thejakeofall
Twitter: / jake0fall
My Ohio Power Tool Affiliate link shareasale.com/r.cfm?b=123230...
Пікірлер: 231
Use a 11/64 drill bit and then a 1-4-20 Tap
@GeorgeParros161
2 жыл бұрын
do you ship to canada?
@JakeOfALL
2 жыл бұрын
@@GeorgeParros161 yes !
Freaking brilliant! I'm doing this tomorrow! Got mine in and installed! Well worth the time and money. Now I can close my truck bed cover!
Oh, you have made my rolling box so much more with this tip. Ordering soon!
Should come standard!
@JakeOfALL
3 жыл бұрын
yeah
@leonlessard6837
Жыл бұрын
Hundred bucks more ...
If you are contemplating on these, just do it! They use pre-existing holes, and they do a great job! Glad I ordered these ones!
@JakeOfALL
3 жыл бұрын
Yep yep ! Cool
@1234chris
2 жыл бұрын
How well have they held up? Are they getting loose or anything?
you just fixed the only issue I had with loading my packout in my bed with the cover on. Ordering this immediately!!!! Thank you
@JakeOfALL
3 жыл бұрын
Welcome !
@mt150313
3 жыл бұрын
@@JakeOfALL what is your web side to order there items
@jaycarneygiants
2 жыл бұрын
Is it because you drill out the normal bottom stop?
This is a cool idea. I just welded a #10 screw to a wing nut. It works very well too.
1/4-20 Tap. I'm in for the Packout pull-out
Any long time use update? New hardware still in good condition and doesn’t get lose? And are they strong enough to pull on the handle when going up stairs?
Holy cow you can go to work man! Impressive speed!
Thank you! Ordering mine now
@JakeOfALL
2 жыл бұрын
Ohhh yay
Got it🤙🏼. Sweet !!!
That's so sweet.
Yessss! Here comes my tonneau cover!🙏🏼
@JakeOfALL
2 жыл бұрын
Hahaha ohh yeah
Awesome !!
@JakeOfALL
3 жыл бұрын
Thanks
Hey so I just got my packout, and this was the only problem I had. So I ordered the pins just now, but I couldn't find the 3d printed pin locks? Thank you for these, saving me a lot of time!!!! 🤘🏼
@JakeOfALL
3 жыл бұрын
store.jakeofall.com/packoutpins all our pins come with the locks
@meterman87
3 жыл бұрын
I’m on your website now and it says the 3D printed locks are an option but your reply says all pins come with the locks. What am I missing? I would like to buy them today so hopefully I will get a reply quickly.
Aside from if the hardware is strong enough to pick up a rolling cart from will it be getting loose with on/off constant use The other concern is now there’s an excess portion sticking out underneath next to the tires will they catch on debris and rocks easier and can’t the excess just be loped off
1/4,20 great video thanks for the tip.
@JakeOfALL
4 жыл бұрын
No problem! Thanks
@JakeOfALL any ideas on how to get broken pins out?
Good job!!
@JakeOfALL
2 жыл бұрын
Thanks
wow I agree cool !!!! nice
1/4" trailer coupler pins work well, 2- 3/4" wide. Drill into upper handle at top where plastic ends. I had those style pins you installed but they got kicked off and broke so the trailer pins were my next solution. And they are about 3$ for 2 on Amazon
@JakeOfALL
Жыл бұрын
Good mod
Use a11/64 drill bit and then a 1-4-20 Tap
Excuse my ignorance. What specifically is this used for? To lock the handle in the lowest position?
Cool, now I can use the pins I bought from you. The tap will help. Thanks for the video!
@JakeOfALL
4 жыл бұрын
Yep !! Lol
Cool cool, also that custom mounting plate for your girl was pretty pimped.
@JakeOfALL
4 жыл бұрын
Right on
Nice 👍 definitely gonna order me some clothes for me is a nightmare appreciate your time
@JakeOfALL
3 жыл бұрын
Cool cool, no problem
I need this.
@JakeOfALL
9 күн бұрын
Yeah
The 3D printed pad locks come with the order of the pins and how many come in a pack? Also how can i order this awesome set up? @jackofall
Where can I buy these quick release pins? Is there a reason why you run a tap and dye into it?
Waiting for a restock!
@JakeOfALL
2 жыл бұрын
Should be in stock now
How tall is the box with the handle removed?
Good.
Damn! Just came across this channel and wanted to buy those pins.
@JakeOfALL
2 жыл бұрын
check out shop.jakeofall.com
Been nice to know about this a year ago
@JakeOfALL
3 жыл бұрын
SOrry !
@jk_wrangler13
3 жыл бұрын
@@JakeOfALL hey it ain't your fault
@JakeOfAll, does anyone sell (or even make) a spring loaded pull pin that has a twist lock feature incorporated in its design, such that when you want to release the handle from the box, you pull on the pin and can twist it 90 degrees and it will hold itself out, until such time as you are ready to secure the handle in place again? I saw one online, but it seemed like the scale of it was too large.
Niiiiiiiiiiiiiiiiice. So this will make it low enough for truckbed cover? This is amazing!
@JakeOfALL
2 жыл бұрын
Yes it will
Wish I’d seen this a year back when I got my toughsystem gear. Would much rather the Milwaukee packout
Uh, I already have the Kaizen Kollers, which takes care of the uppers on the packout rollabout. So it fits in my corolla trunk.
@JakeOfALL
3 жыл бұрын
Those are awesome
@airvine91
3 жыл бұрын
Do you find the "Kollars" provide more support to the at-times wobbly handle when many boxes are loaded to the top? The pins seem adequate, but I'd want something really sturdy.
@phillipsofthedriver
3 жыл бұрын
@@airvine91 seems a bit wobbly either way, I can't tell the difference. Go for the packout hand truck for a real sturdy wheeled toolbox carrier. (I have one of those now too)
Do you have the video of the lock mod
Good. Milwaukee
can someone place a link for the quick pins?
Is there something I can use to put my screwdriver inside my box for hanging them
@JakeOfALL
3 жыл бұрын
I have seen people that have hung some cloth tool pouches in them
🌀🌀 @JakeOFAll 🌀🌀 So I just received the pins like yesterday I just installed them and the handle still pulls up it’s like the pin that locks the handle in place isn’t long enough or do I do now?
@JakeOfALL
3 жыл бұрын
Sometimes you need to drill out the metal on the handle so the pin has room to get in the hole. other times it case the pin is not threaded in all the way . take a look while you have it up on the bench send me some pics to orders@jakeofall.com if you still can't get it working
Will this let you open it with boxes attached?
@normferguson2769
3 жыл бұрын
If you remove the handle you can open the stacked boxes one at a time. Just be careful it doesn’t flip backwards with the weight of the tipped-up boxes. If you flip it then you have a half hour resorting stuff.
Are these durable? Is there reviews or your experience on how they stand against stairs
@juicemister11
3 жыл бұрын
Could you email me I just purchased a pair
@normferguson2769
3 жыл бұрын
I just installed mine and it looks like they stick out and will be damaged by stairs. The next issue would be to install plastic bumpers so they don’t get damaged.
Hi Jake of all quick question will these work with the tread sleds ?
@JakeOfALL
3 жыл бұрын
They will not
@adirondacksxss9156
3 жыл бұрын
@@JakeOfALL looks like its time for a custom options thanks for the response.
When will they be back in stock would like to buy asp ?
@JakeOfALL
3 жыл бұрын
They are available now !
Can you still use the back of the pack out to pull upstairs?With this mod attached.
@JakeOfALL
3 жыл бұрын
yes, the wheels stick out more than the pins do.
@codyvanhouten4658
3 жыл бұрын
Is it strong enough though to hold the weight going up stairs and taking a beating?
@L4DYam3nd
3 жыл бұрын
@@codyvanhouten4658 You might be better off getting the Kaizen Kollar, seems way more heavy duty than this as it has a mechanical fastener kaizeninserts.com/products/kaizen-kollar-milwaukee-packout-cart-handle-release
I tried to buy a 16/24 bit but Home Depot was out but I bought a 1/4"-20 tap that came with a bit but it says #7 is that the metric equivalent of 16/64? I want to finish this tonight but now I'm wondering if I should wait and get a 16/64??
@JakeOfALL
3 жыл бұрын
I have updated the description, use a 15/64 if you can if not round to a smaller size
@normferguson2769
3 жыл бұрын
I just used my 1/4-#20 tap and the pin body screws in tightly (never going to fall out).
My pins aren't long enough to catch the packout handle when i reinstall the handle. Any ideas?
@Chrislav7
3 жыл бұрын
The pins are the same length as the screws I removed so nevermind. Guess I just gotta play around with it some more or something. I might be an idiot lol
No shipping to Australia
Hmm I wonder if I could do the same to my tough system box.... 🤔
@JakeOfALL
4 жыл бұрын
I don’t see why not, I have not seen one up close enough to be sure
Hi, saw your presentation and followed the link into the subscription. The pins 1/4”-20 UNC I guess, read as well the V explanation and the limited in stock but you see I’m from Belgium, Antwerp. The first link shipped Milwaukee only to the US, not Europe. Your explanation and the items on your url, there is no ring? It doesn’t looks as the pins you have used in the presentation. Seen also that the company is in Holliday. So I look forward for any news about and by the way, is it perhaps in Europe to order. If not and you are again on the run, I look forward to the answer. Best, Luc Rik
@JakeOfALL
Жыл бұрын
We have a new style now that doesn’t use a ring that is much better and all of them ship worldwide
i have a lot of play with my handle , you have any problem with yours .
@JakeOfALL
4 жыл бұрын
Orlando Martinez I might have had a little but I drilled the metal part a little more
When are going to get more pins in stock?
@JakeOfALL
2 жыл бұрын
They are back in stock!
I want that hat
They are sold out how long do I need to wait for new shipment 🚚 I’m ready to buy a set with the black pin stops when am I able to buy both
@JakeOfALL
2 жыл бұрын
They should be here next week
@Jericho_bella
2 жыл бұрын
@@JakeOfALL how do I get a order in
@JakeOfALL
2 жыл бұрын
@@Jericho_bella email us at orders@jakeofall.com
@Jericho_bella
2 жыл бұрын
@@JakeOfALL when should I email to place my order
When will they be back in stock?
@JakeOfALL
3 жыл бұрын
They are in stock, we just had a bug on the website. It should be fixed now
When do you think you will get more of these kits in?
@JakeOfALL
2 жыл бұрын
This week !
@gerardoramirezjr3346
2 жыл бұрын
Is there somewhere I should check for a notification post so I can make sure I get a set.
I’ve been patiently waiting to order mine but they have been unavailable for a while so I guess I will just be purchasing some from Amazon
@JakeOfALL
2 жыл бұрын
Actually they just went live on the site !
@JakeOfALL
2 жыл бұрын
shop.jakeofall.com/collections/milwaukee-style/products/quick-release-pins-for-your-packout
@mr.bernstein2813
2 жыл бұрын
@@JakeOfALL Great Thanks for letting me know
I have a question about making something new how can we talk about that
@JakeOfALL
4 жыл бұрын
You can msg Me @thejakeofall on IG
Where can i buy that sick hat??????
Greetings, Does slider mods come with pins as a kit
@JakeOfALL
4 жыл бұрын
Yeah it can !
@reddbeard2030
4 жыл бұрын
@@JakeOfALL I see/saw on the site. It's in my cart but how can I get JUST the locking mechanism for the VacOut along with my order?
@JakeOfALL
4 жыл бұрын
Redd Beard email us at orders@jakeofall.com
Any idea when these pins will be back in stock?
@JakeOfALL
2 жыл бұрын
It will be about two weeks. You can email orders@jakeofall.com
@JakeOfALL
2 жыл бұрын
They are back !
Bro your red and white cap i really like it where can i get one. And like your videos so nice to my eyes to see all red and black tools and tool box nice collection bro
@JakeOfALL
3 жыл бұрын
Thanks so much!!! I get my swag from www.milwaukeetoolswag.com/
@spannerm1979
2 жыл бұрын
I blagged a cap from the retailer who sold me my first pack out kit. My order was running late so I asked for any freebies. He duly sent me a Milwaukee cool bag, multi-tool and cap. One very happy chap.
Went to order and it says they are sold out. Will you be getting more?
@JakeOfALL
2 жыл бұрын
Yes this week that is coming up
brotha we're did you get the hat ?
@JakeOfALL
Жыл бұрын
Milwaukee Tool swag . Com
What size is the Pin Release??
@NoflectioN
3 жыл бұрын
Search threaded quick release pin on Amazon. It will be first one that pops up threaded. Check reviews full of packout people
When will get more pins for sale
@JakeOfALL
Жыл бұрын
Soon
You ship to Canada?? Other wise how long are those pins??
@JakeOfALL
2 жыл бұрын
We do ! They are about 1/4 - 3/8
@fenixTKO
2 жыл бұрын
@@JakeOfALL website doesn’t allow… maybe look into it. Thanks!!
@JakeOfALL
2 жыл бұрын
@@fenixTKO email me your address to orders @jakeofall.com please
@fenixTKO
2 жыл бұрын
@@JakeOfALL No need too my man!! I was just able to place an order for 3 kits!! Thanks meho!!
What size threads are the original screws
@JakeOfALL
3 жыл бұрын
They are.mire like a taper, so sorry not sure
@gazrobbo1
3 жыл бұрын
@@JakeOfALL do you ship to the uk also does it include the tap / drill bit or the correct sizes required
Hey man, just subscribed, great content. Where do I find these handle pins?
@JakeOfALL
3 жыл бұрын
store.jakeofall.com/packoutpins
So can you use these and still pull up stairs
@JakeOfALL
3 жыл бұрын
Yes
@Andrew-um1sc
3 жыл бұрын
Nice that was my biggest concern
where can I get items.. sorry I missed it
@JakeOfALL
Жыл бұрын
Shop.JakeOfALL.com
Why is your handle bar sticking out on the bottom of the packout almost touching the floor?
@JakeOfALL
Жыл бұрын
it was just not in place
@michaelp6487
Жыл бұрын
@@JakeOfALL when will you have these back in Stock? I would like to order a set for my packout.
1/4, 20 tap sockets
@realtoolsgarcia5595
4 жыл бұрын
Did I win the giveaway?
What is the size of the drill bit?
@JakeOfALL
4 жыл бұрын
15/64 drill bit and then used a 1/2-20 Tap
@darioherrera3122
3 жыл бұрын
@jakeOfAll 1/2 Tap or 1/4 Tap ?
Why is no possibility to ordered over ocean? :(
@JakeOfALL
2 жыл бұрын
there should, email orders@jakeofall.com
OMG, TAKE MY MONEY! I just bought a Packout system for my photography gear, but the damn box doesn't fit in the trunk with the handle on. This solves my problem completely!
@JakeOfALL
3 жыл бұрын
I have a PackOut or two I use for Video Equipment
@mikezupancic2182
3 жыл бұрын
@@JakeOfALL hey, trying to order these and the blocks. The site doesn't add shipping. Do I do the pins plus shipping and just add the blocks? ($19 total?)
@mikezupancic2182
3 жыл бұрын
BTW, do you drill through the metal part of the handle, or just the plastic portion where the screw used to be?
@JakeOfALL
3 жыл бұрын
So if you order the locks with shipping and add the blocks you will be covered.
@JakeOfALL
3 жыл бұрын
Just the plastic
Where do I get these !!
@JakeOfALL
Жыл бұрын
Shop.JakeOfALL.com
Where is the link for the pins?
@JakeOfALL
Жыл бұрын
Shop.JakeOfALL.com
the correct tap drill for a 1/4-20 is 13/64 & not a 15/64.
Jake where can I order these pins from I am in Sydney Australia
@oystercovecraftsman9219
3 жыл бұрын
They should do it.
@oystercovecraftsman9219
3 жыл бұрын
aus.grandado.com/products/2-pcs-m6-steel-spring-plunger-indexing-plungers-with-pull-ring?gclid=Cj0KCQjw8vqGBhC_ARIsADMSd1DK-FUo7T_KlyZnHJ_BKUujx-w_o7DJT50v7LqcDHt2B01q1yx3l2QaAhZ_EALw_wcB&variant=UHJvZHVjdFZhcmlhbnQ6NDc0NDA2NDg
Just installed mine but it’s not working 😓
@JakeOfALL
Жыл бұрын
Sometimes you need to drill the hole in the handle out
@thelakerfannexxdoor7751
Жыл бұрын
@@JakeOfALL worked like a charm 👍
Where do I go to order this mod from you?
@Oreokato
3 жыл бұрын
Hello?
@JakeOfALL
3 жыл бұрын
Store.jakeofall.com
Can I get quick clips delivered to the uk
@JakeOfALL
3 жыл бұрын
Absolutely message us at orders@jakeofall.com and we can get you an invoice
PAGE NOT FOUND.
Cool! Some much missing info!
You know the Dewalt Toughsystem 2.0 has a detachable handle
@JakeOfALL
2 жыл бұрын
Nice, now a can sell all my packouts, JK
Where do I order from
@JakeOfALL
2 жыл бұрын
shop.jakeofall.com/products/quick-release-pins-for-your-packout
@jcumba7998
2 жыл бұрын
Thank you sir
First two links, “Page Not Found”
15/64 is too large of a drill bit for this install. Screwed my box up. Thanks Jake.
@JakeOfALL
3 жыл бұрын
The description has been updated for a while now ...
Website not working
@JakeOfALL
2 жыл бұрын
Updated the link ~!
What tha phuk u wana do that 4 amigo ???
@JakeOfALL
3 жыл бұрын
SO you can take the handle off for truck bed covers or to fit in the trunk
Threading plastic? Little stick on tabs? I don’t think so.
Breath
@JakeOfALL
Жыл бұрын
Omg lol
1/4-20 but your description says 1/2.
@JakeOfALL
3 жыл бұрын
It's 1/4 20
Why don't Milwaukee just design it so that it collapses down to fit in your truck. That makes the most sense.
“Carpet tape”