OH MY GOSH YOU HAVE SAVED MY LIFE WITH THIS I HAVE BEEN TRYING TO FIND OUT HOW TO DO THIS FOREVER [also, first! >:]

this is exactly what I needed as the last bit of instruction for making my suit of my fursona, so thank you so much!

@birdboy5278

2 жыл бұрын

same!

Quick tip, since it wasn't mentioned in her video: this featherweight boning often comes in a roll, which causes it to coil when you may want it to lay flat. You can iron the boning to make it malleable and then allow it to cool in whatever shape you want it. Be sure to keep the fabric sleeve on it while you iron to avoid the plastic melting to your iron. Happy sewing! Side note: though you may find some beginner sewists using zip ties as boning, Nefertity is correct in warning against it. Zip ties will not only degrade over time, but can also lose their shape, requiring you to replace them to maintain rigidity.

Nice tip, I’ve always wanted to make feathers and this helps a lot.

Yay!!! Fresh new tips !! Honestly I don’t know what I would do with out you Neffertity! Your so sweet and patient with tutorials and never forget a stingily thing to help explain ! Tysm

@alisongracia8058

2 жыл бұрын

single* I meant single not stingily

Lol mine turned out super stiff at first (probably because I used the wrong foam and technique xP) and then I didnt install them right so I have stiff feathers that still find a way to flop around-

Those look really flippin good :0

Quick tips? I'm gonna love these :)

@Neffertity

2 жыл бұрын

Great for those with a short attention span! Haha

That's some cool feather! Quick question, are you working on making a video on the different kinds of stitches you use with fabric and whatnot? I think it's an interesting topic to me.

@Neffertity

2 жыл бұрын

It is something I want to cover in my "Basics of Sewing" video I'm working on.

This is extremely good to know I want to go ahead and make a Quetzalcoatl head for my Dino mask for my girlfriend I'm going to need a lot of feathers.

@Fvckallofyou1

2 жыл бұрын

A QuetzaWHA??!

@animationraptor2583

2 жыл бұрын

@@Fvckallofyou1 it’s a type of flying reptiles that were around during the dinosaurs. They were HUGE. It’s pronounced cet-zal-quat-l

@Fvckallofyou1

2 жыл бұрын

@@animationraptor2583 oh i thought it was a different kind og axolotl lmfao

@animationraptor2583

2 жыл бұрын

@@Fvckallofyou1 yeah lol

@machinedragonnero7740

2 жыл бұрын

@@animationraptor2583 I wish I had seen this sooner, and while you're spot on with that amazing flying reptile. The Quetzalcoatl that I'm referring to is the feathered serpent/ winged serpent Mayan god of knowledge wisdom weather and more.

Wow this is a great tip thanks

Awesome! I'm making a dino mask fursuit and this will be super helpful for her few neck feathers!

So you gave that feather some boning? lol I approve.

YOU SAVED ME

Thank you so much!!! You're amazing love your work so much!

I have a feather king drekubus and this helps so much

That's so smart! Thx

What sewing machine do you use? I love the viewing window for the bobbin

@Neffertity

2 жыл бұрын

It's a Brother CS-6000i

Thanks! I really needed to know how to do this lol

Woah

so helpful!!

That looks fantastic!

This is such a helpful video, thanks.

love your stuff girl

So cool

Hey, Neffertity! I started watching your videos a while back and I am so inspired! You are one of 3 people who made me a furry and I'm very, very happy! But as my fursona is a bunny raptor there aren't any tutorials on the internet (as far as I know). So I was wondering if you could make a video on how to make a raptor tail! If you can't that's fine, I don't mind, because a lot of your videos have taught me how to make tails and other things like that. Thankyou so much, you're the best!

@Neffertity

Жыл бұрын

I'm actually working on a tutorial for raptor tails very soon

@Just_C7G

Жыл бұрын

@@Neffertity wow thankyou so much!

Wonderful tip ^^

Wow what a fantabulous tutorial! Personally I really love your content and it helps me improve on my Dino mask making skills, I do have a question tho, please can you tell me or give me a link to the white thin foam looking fabric as I am making spinal plates for a scorpion tail and I think that fabric would be good for it! Thank you very much!

@Neffertity

2 жыл бұрын

It's just simple heavy duty fabric stabilizer. Amazon sells it.

@fengthearchenchy4479

2 жыл бұрын

@@Neffertity thank you very much!

I love you video

Cool :3

Ive i ever get a dino mask, which i plan to get, i think im gonna use this for it, but ill have to learn sewing first (oh boy)

@Neffertity

2 жыл бұрын

I thought you were a friend of mine at first because you have her OC in your pfp. I now realize it's because it's stolen. :/

If you don't wanna buy boning (it's expensive) you can use zipties too!

@Neffertity

2 жыл бұрын

I really don't recommend zipties because the plastic in them degrades over time and because brittle shards.

Wonderful tutorial!! I'm currently working on a dutch angel dragon premade that I plan to sell at a convention, but I'm struggling quite a bit with how to go about applique'ing the smaller designs onto the wing minky. The tutorial you made on how to make wings was definitely helpful but I'm still not quite getting it. As an idea for your next tutorial, do you think you could go more into detail on how you applique markings into minky? Any elaboration would be a huge help. Love your work, keep it up!!

@Neffertity

2 жыл бұрын

Definitely planning something like that soon!

Fun fact: you can use zip ties instead of boning, if you have trouble finding boning or if zip ties are cheaper

@Neffertity

2 жыл бұрын

In my experience, zip ties degrade over time and get very brittle when they get old. Hence why I wouldn't recommend them.

@ollie1944

2 жыл бұрын

@@Neffertity oh, I didn't know that! I was just going off of what I heard in corseting youtube videos

Love the tutorial 💖 but WHERE IN THE WORLD ARE YOUR LIKES GOING!? Your an ✨amazing✨ creator, I don't understand. Love you though 💕💎

@Neffertity

2 жыл бұрын

I haven't posted a main video in months, so that's likely why my audience hasn't come back for a long time.

Can you please do a accessary attachment tutorial

hey nefertiti! you are my FAV furtuber! on friday im going to a convention say maybe i can meet you if you go!

@Neffertity

2 жыл бұрын

Oh? Which con is that?

@jakejhonniefan

2 жыл бұрын

@@Neffertity the one in boston ma

@Neffertity

2 жыл бұрын

@@jakejhonniefan ah, no I'm afraid I'm in the opposite corner of the USA. So I can't make it to that one. I hope you have fun though!

@jakejhonniefan

2 жыл бұрын

@@Neffertity thank you!

Would you happen to know the length of feather this would be recommended for? I have some silly, extremely long feathers I need to make for a tail and I don't particularly want to use something like wood or metal.

@Neffertity

Жыл бұрын

I generally stick around 9 inches

sorry if i asked this before in the past, what is the white material you use at the start of the video, where you attach the bonning to?

@Neffertity

6 ай бұрын

It's simply heavyweight stabilizer by Pelon.

good lord i have to make ateast 40 of these 😭

For the bone, is that a piece of paper you sewed on or is it fabric stabilizer?

@Neffertity

2 жыл бұрын

Fabric stabilizer

Wow, this technique is going to help me make my vulture fursuit! Thanks for the tip Neffertity, you make great tutorials for the furry community. #furry #OwO #UwU #fursuit

hey neffertity, this question is off topic to the video, but do you ever plan to make a quadsuit in the future? Maybe of your dragon character? I'm asking this because I can barely find any tutorials of quadsuits and I'm making one for Halloween this year. Thanks 👍👍

@Neffertity

Жыл бұрын

So to begin with, I doubt I will ever be able to do a quadsuit because of my scoliosis. The back pain is too much for me to take the strain a quadsuit would put on me. And following that, I want to mention that quadsuits are INCREDIBLY DEMANDING to wear, and I would not recommend one for anyone with back or neck issues, and not for minors either. This would put your health at severe risk, and is very ill advised.

I’m pretty early this time^^

what is the name of the white fabric you use near the start of the video called? 1:11 the white fabric of some kind you use to make the feather shapes with, that you insert later in inside the minky fabric. would be a huge help thanks

@Neffertity

2 жыл бұрын

As stated in the video, it's a mid weight fabric stabilizer

Neffrety (sorry if I spelt your name wrong) do u know how I can attach ears to a head band?

@Neffertity

2 жыл бұрын

I'd recommend looking up tutorials for cosplay ears

@its.ma.turn.on.da.xbox.

2 жыл бұрын

@@Neffertity I have none have fitted what I can do tysm for helping tho and Ty for replying

Hey, totally unrelated question, sorry- Are there any specific brands of paint sealer-type stuff that can be used to seal printed fursuit eyes, so they survive water? (If anyone else knows a specific brand, please leave it in the replies, I have been looking around for a while and nobody has mentioned a specific brand and I’m scared of buying the wrong thing! @~@)

@Neffertity

2 жыл бұрын

From my personal experience I've found the matte Mod Podge aerosol works decently well to seal paint.

@ZoroExists576

2 жыл бұрын

@@Neffertity Thank you so much, this helps a lot!

W to że jak klocuch neffertity

Hi

Neffertity how mutch is a inch in cm?

@triangleshiny

2 жыл бұрын

1in is about 2.5 cm iirc you can usually look up conversions on google (like "convert inches to centimeters" or "(x) inches to centimeters") and it'll show websites that can do it for you ^^

Hai Neff, you have already seen me in your mermaid vid but if like to make a small request if you have some time :) I'm not doing this for vies this is simply artist to artist. Do you mind if you take a look ant my oc named Sydney? She is a Fnaf security breach oc but she's leaning to be more of a furry oc and I'm thinking of getting her commissioned when I get a job lol [NOT ASKING FOR COMMISSION] I'm not sure about her design as her color scheme is extremely used and not really original. I was thinking of making her a more original character by making a furry type as a test but again, she dosent look original . I'd extremely appreciate if you had a quick look at her as I'm only in grade 7 and trying to get my name out as not many people know my art Thank you, and sorry for the big read :'l -sam

@saamdrawz

2 жыл бұрын

Here's my link for her :} kzread.infoFgMTeY6ZsRI?feature=share

@Neffertity

2 жыл бұрын

Based on what I can see it looks very possible to made into a suit. Depending how you intend to tackle the metal like appearance of a FNAF anamatronic might be thr biggest challenge.

@saamdrawz

2 жыл бұрын

@@Neffertity thankyou Neff thosbmeans a lot, I'll probably use a spray paint gradient and short fur. 🤗

NEFF ME MADE LIKES 444 :DDD