Correction: the mix should be 1 part quick lime to 3 parts sharp sand. The quick lime then expands on slaking to provide a 1 part quick lime to 2 parts sharp sand mix.

wow mate that's a fantastic mixing method, thanks

Thanks for doing this!

Very educational - excellent.

Thank you James.

Excellent video.

Really Interesting!!!! I have to get on with it now

As far as I know as Nigel Copsey states the mix should be 1 part quick lime to 2 parts by volume of well graded sand. This is a historical mix.

@annashealthylifeeverything8583

7 ай бұрын

ok. in another video a professional stated 5:1 ratio 🙄

@bristollime

6 ай бұрын

You need to remember the slaked lime will expand from its original measure. This has been anticipated with the initial measurements before slaking had started.

Thanks for that all the other videos on the subject are too high brow this gave me what I needed to know

Really excellent stuff, as you say there are a few small scale films out there but are impractical for larger scale jobs, so what is your background mason? Brickie?

Great video James , just a question my local quarry sells crushed limestone 6mm down to dust ,could I mix this with sharp plastering sand (it’s brown in colour) , for random stone pointing! As I’m finding it very hard to find sharp washed 5mm gritsand . Also if you were using ratio 3/1 is it still 11/2 water 💧 Tnx

Use a bit of waving pipe before you put and in. Put kibble in pipe. Pull out pipe.

Great Video James, at one point you mentioned that you added stone dust, is that to act as a pozzolan?

@memphistorin4443

2 жыл бұрын

i realize I'm quite randomly asking but do anybody know a good site to watch new movies online?

INFORMATIVE VIDEO, COULD YOU CLARIFY WHAT DID YOU MEAN BY 1¹/2 MEASURE WATER? IS THE RATIO 1 PART LIME + 3 PARTS SAND + 1¹/2 WATER. THANKS.

could the reaction of not worked properly due to drowning the kibbles at the start?

Pity the sand was too dry so didn’t show a good reaction. After they were left to finish slaking (30 min.), both bins were wetted up and used whilst still warm. With a wetter sand they can be used straight away.

@drfishmusic

4 жыл бұрын

Hi Mike great video. Nice to see someone doing a more realistic size mix for those of us needing to use a fair amount and not having to mix up a thimble full every five minutes. I'm guessing you guys are in Bristol from the mention of Holme sand. I was there for 8 years now moved to North Devon and renovating a run down lovely farmstead. I've been using putty mortars for years but just about to tackle my first hot mix with some calbux 90. With the aggregates. I have a nice washed sharp sand available here albeit lacking in any limestone. There's no finer silica sand like holme available. There is what they use for plastering here they call a mortar sand. Similar grain size to holme but a bit red and crap looking. Might be okay for a hot mix. What ratio of sands do you suggest I use? I guess as no limestone aggregate 3:1 with the quicklime but unsure on the ratio of sharp to finer stuff. Do I even need the finer stuff? Should I add a little pozzolan as were a bit prone to rain here although were semi sheltered ish? I have loads of broken slate I can grind to dust to use as a mild pozzolan. So many questions. I'm reading Nigels book at the mo. Great vid. Cheers. Ben

@mikehardwick8070

4 жыл бұрын

Dr Fish Hi, Good to hear about your project. Yes, we’re just north of Bristol near Thornbury. The aggregate needs a mix of sizes up to a third of the thickness of a mortar joint, usually 0-4mm which if drawn on a graph would form a bell-curve. Our local mortars are all ash mortars which have no sand aggregate at all! Use a local sand to try and match your local mortar colour. You could use all slate dust if that matches, try a small patch and see how it is after three weeks. We have used the Biddeford grit mixed with Holme sand (a coarser grade of Holme to give a better size variation). Mike.

@drfishmusic

3 жыл бұрын

@@mikehardwick8070 Thanks. I've gone for 50/50 mix of the local sands and a little limestone flour I found in Mole Valley for cheap. Been going well so far. Got most of the gable end fixed up now. Yea I know too well the Bristol black mix mortars. Horrible if you have to rip anything out like an old ceiling. Cheers again for your video. This is my go to method of mixing now. Hoping to get a roller pan mixer in the near future as I have a lot of Masonry to build in the spring but it's hard to find one and man they're expensive. Worked out I need at least 7 tonnes of mortar. I can buy premixed but by the time the delivery cost is added it's not very cheap either.

@mikehardwick8070

3 жыл бұрын

Dr Fish Thank you, glad it works for you. We have four bins which means that when we use all of them some are “cooking” whilst others are filled, whisked or emptied. This way there is no waiting time and we can mix up half a tonne relatively quickly on site and ready to use hot. A roller pan may not be easy to move and would crush out a lot of the variation in the mix, so it may not match the original colour so well if trying to match but would give better conformity.

@andyobrien5696

2 жыл бұрын

Mike, do you add any pozzalan to your hot mixes? Great video, thanks

Where u get u quicklime?

@edinburghwheatgrass8106

2 жыл бұрын

Is this quicklime from a UK producer?

Where in uk u got limestone sand from plss?

@markanderson6969

3 жыл бұрын

Tarmac do lime

I learned it should be 5:1, not 4:1

No PPE? Highly unprofessional

@AS-lu5dm

2 жыл бұрын

Hes got his safety boots on 👍🏼