This is exactly what I thought could happen. Thank you so much for sharing this

Me quite obvious that since the late 40s of the twentieth century, a secret project has been developing in the United States for the development and production of aircraft, where the lifting force is created using high-frequency vibration. It all started with James Pitts' "Sky Car" vibrating orthotopter umbrella, then the umbrella was closed with a dome and devices appeared according to the scheme of conventional electromagnetic vibrating speakers (membrane + inductance) - fragments of the membrane were found by a farmer in Roswell. Then they created piezoelectric thrusters, or with small dischargers on the surface (they glowed all over the body due to ionization of the air), and now they are planes with plasma propulsion panels (so they are angular - that is, with flat surfaces). Thousands of discharge cells are densely packed into motor panels - they shoot streams of plasma (railgun architecture - coaxial electrodes). The ionized air of the spark discharge is accelerated in the railgun chamber by the Lorentz force to enormous speeds - a kind of ramjet engine is obtained. Just imagine! - tens of thousands of small ramjet engines assembled in panels and launching plasma synchronously at a huge frequency (hundreds of kilohertz). Plasma jets form toroidal air vortices - this air cushion creates lift and acceleration. See, for example, the MARAUDER (Magnetically Accelerated Ring to Achieve Ultra-high Directed Energy and Radiation) project. My article "UFOs are made in the USA" and the books "UFO Hunt" and "UFO Elimination" describe all this in detail. The technology is quite mundane - it is known in great detail thanks to information leaks. For example, air ionization in the coaxial elements of a railgun is created using radiation (radioactive polonium is introduced into the metal). Devices of this type were used throughout the 50s-60s-70s-80s for secret missions (they took off, as a rule, from special submarines). With the fall of the USSR, their use by the United States was practically curtailed (in the novel "Little Green Men" by Christopher Buckley, speechwriter Bush Sr., a scene is described where the US president decides to curtail the "flying saucer" project). The winding down of the project can be recorded by the drop in magnesium consumption in the United States, since such fuel was used in fuel cells (magnesium strips were burned in forced galvanic batteries), this is 2007-2008. However, later the development of the technology continued in the Russian Federation and China (the technology was restored by reverse engineering methods for downed devices). Secrecy, however, was maintained and there was no civilian use because the technology was not suitable for it - harmful microwave radiation from pulsed plasma thrusters (harm to pilots and impact on electrical appliances inside and along the flight line). The payload is small (but one nuclear charge is enough). There is no radio communication - the discharges create interference and jam electronics - unmanned vehicles can fly and maneuver only in accordance with the program. Previously, there was a narrow application profile - rare spy missions (so that pilots do not get a lot of radiation). Reconnaissance aircraft of this type were often observed at military bases, missile launch sites and airfields. They were even seen by peaceful geologists in the taiga, where clearings for seismic exploration were laid - UFOs flew there to check whether military construction was underway (I myself heard stories about this))). I think that soon this technology will be declassified, and cargo airships with flickering round plasma panels on the surface of the hull will appear in the Arctic sky.

Cool! It sounds like sci-fi spacecraft engines.

Thanks for showing very cool!

@edwinwaters6778

4 жыл бұрын

You are welcome.

:) this is interesting. I have just started experimenting myself with high voltage and magnets. Interested in levitation, would be interesting if quartz could be used as conduit. Could you drill a hole in the quartz, and see if plasma is channeled thorugh it.

@edwinwaters6778

3 жыл бұрын

I don't know if drilling a hole in the quartz, would channel the plasma through it but that might be an experiment worth doing. I would be interested in seeing the video if you did the experiment.

whoa!!!!!!!!!!!!! be careful you know they dont want anyone to see this

Can you route a audio signal through crossovers and use this as a tweeter? It would look really sweet onto of a crated subwoofer. Assuming you can use it to carry a signal, Im curious to see the effect of two vortex speakers set to 40hz then spaced to create a standing wave. Then using the pressure zones to float magnetite or hematite dust, which being naturally

@edwinwaters6778

2 жыл бұрын

I haven't thought of doing this experiment but it sounds like an interesting experiment that you should conduct.

Have a diagram if how and what was used to make this?

I find this very intriguing and fascinating. It raises a lot of questions for me, like what would be a practical application for this? Or is this just a simple light show for entertainment? Why do this?

@edwinwaters6778

3 жыл бұрын

Hello, Thanks for your comment. There is no practical application for this. I made this video because I wanted to see plasma rotating in a magnetic field.

Did u see any distortion or something near the plasma? Like an air distortion on a sunny day

@edwinwaters6778

3 ай бұрын

No I didn't.

Looks like something's beginning to cook there at the end.

A modern djed

U sending electric threw it or is doing it its self

@edwinwaters6778

4 ай бұрын

Through it.

Where did you get that quarts tube? Is it from desoldering station?

@edwinwaters6778

6 жыл бұрын

You can find them here: www.aliexpress.com/item/Clear-quartz-tube-OD16-thickness1-L20mm-for-sample/32617481091.html

incredible force field effect...crystal charging station. Love to see this with a mercury engine.

@elyesgrati

3 жыл бұрын

What?

Does it work with a plastic tube? Thinking of making some fancy looking spark gap

@edwinwaters6778

5 жыл бұрын

I don't understand your question. However, you have to consider the heat will melt the plastic.

@francischeefilms

4 жыл бұрын

For very high voltages, some plastics will break down and may not give similar results as in this video. Plus as the channel said, plastic will melt. Although u might be able to do this with a rod of PTFE, which has good dielectric properties and high melting point. Probably easy to get a hold of than a piece of quartz tubing.

Not True. The discharge is outside of the tube. The metal end cap is guiding the discharge outside the tube, not inside. If the discharge was inside the tube, you would not hear any sound and you would not see any sparks at the edge of the magnet. You can demonstrate this easily with an incandescent light bulb. Connect the terminal to the base while holding the bulb. Since the bulb contains argon gas, it will glow purple and streamers will quietly reach out to where your fingers are touching the bulb.

@edwinwaters6778

3 жыл бұрын

Who are you responding to?

u made a magnetron

How much volts are you putting through those magnets?

@edwinwaters6778

6 жыл бұрын

I don't know the exact voltage that was put through the magnets. However, the output voltage of the power supply is 3KV-30KV.

@brandonparks870

6 жыл бұрын

Thank you for your answer. I am new to plasma. Does it have any uses that we know of?

@edwinwaters6778

6 жыл бұрын

Plasma is used to sterilize and is also used by NASA for propulsion.

Turn of the Light

this is really cool! I'd like to try it out to, hate to ask a silly question but...how exactly is it set up? from the video I'm guessing you place a magnet on either end of the quartz and apply electricity to both magnets, +/- respectively? ...I see the positive end you've connected to the to magnet, where's the negative connecting tho (what's that white thing?) lastly, and sorry for all the questions, but where would I find the quarts tube? ~ Thanks!

@edwinwaters6778

7 жыл бұрын

Hello Thomas, thanks for checking out the video. The experiment was set up as you have guessed. I placed the quartz tube inside the black ring magnet and a magnet on top of the quartz tube. I noticed that plasma rotated on the outside of the quartz tube, if the magnet on top had an outer diameter that was slightly larger than the quartz tube. The white thing is just a failed 3d print that I used to place the magnets and quartz tube on. The purple thing was used to add height. The negative wire was fed under the white thing and through the purple thing to be positioned in the centre of the black ring magnet. If that doesn't work then try to place the wire on the inside of the magnet. As for where you can find the quartz tube? You can find it here: www.aliexpress.com/item/Clear-quartz-tube-OD40-and-OD10-for-sample/32679479922.html?spm=2114.13010608.0.0.DCU9dI Here is another experiment that I did which you may not have seen: kzread.info/dash/bejne/qXWJ1K2Ckauclto.html Good luck.

HI is ther any heat produced

@edwinwaters6778

7 жыл бұрын

Yes there is, apologies for the late reply.

I wonder if it makes laser energy