TPU PROBLEM HAS BEEN FIXED! In this video I used the firmware, which was newest at that time and it had problems. After the new update it has been fixed.

You have the old firmware! Yours is months old and a lot of issues have been fixed and more options got added! I have none of the problems you mentioned, TPU prints were very detailed and repeatable!

@Mr44RO

8 ай бұрын

When I tested it, it was the newest version. I haven't tried new version, but that's if that fixed the issues. I will try it by myself soon.

@Elektrotechniker

8 ай бұрын

@@Mr44RO I think you should edit your Video at the beginning to inform the viewers that this was the outdated firmware version, to be fair! Print Quality improved significantly after updating, some blogs posted pictures of a print before and after that update, and they seem to have changed something with their extrusion as the print surfaces got way smoother. Btw, I can only recommend tuning the pressure advance in order to mitigate issues like the one I had, where some corners had constant underextrusion. Also set your Z-hop distance down from 0.4 to 0.2 as you'll eventually have more stringing on some prints. I advise to also look at your Retraction length as mine was set to 1mm, which for a direct extruder setup would be the highest number you should need... Definitely dial that down to 0.8 and then try changing it in steps of 0.05 depending on your results. I guess that those settings made the most significant impact on my print-quality so far... Okay maybe setting the flow multiplier from 0.95 to 1, and increasing my Line-thickness to 0.22-0.25 depending on the visibility of each line (eg. outer perimeter lines 0.22, infill 0.25).

@Mr44RO

8 ай бұрын

@@Elektrotechniker Thanks for the info. I usually test printers with default settings to see how they work out of the box. If I have time I will make another video about update and how to increase print quality.

I'd like to buy my first 3D printer. Is this printer suitable for me? I need accurate and reliable 3D printer. Thx for your answer.

Cant understand this guy. Speaks to fast with no pause between sentences. Mumbling