In this video we're going to take a look at the Q1 Pro, which is the latest fdm 3d printer from Qidi Tech. This machine uses a corexy arrangement w/ dual z axis motors mounted to an all metal frame, klipper firmware and input shaping to maintain accuracy at speeds of up to 600mm/s. The structure is enclosed w/ active chamber heating up to 60°C, and the print head includes a direct drive extruder with hardened steel gears, filament detection and tangle sensors, and an all metal hot end with a bimetal nozzle that can print at temperatures up to 350°C, so you can work with a wide variety of common filaments like PLA and PETG as well as high temperature engineering filaments like, nylon, polycarbonate, carbon fiber and more.
The hot bed can reach 120°C with a flexible PEI build plate for good adhesion and easy removal, and it has two sensors attached below for z axis calibration and bed levelling to ensure a perfect first layer with every print.
It also has a built-in camera so you can monitor your prints remotely or record time lapse video. Check out the video to learn more!
Get the Q1 Pro here: qidi3d.com/en-ca/products/q1-...
RST website: www.resystech.com
Follow RST on Facebook:
/ renewablesystemstechno...