PZ Drum Mower Bearing Replacement

Автокөліктер мен көлік құралдары

Replacing the drum bearings on a PZ CM 185 drum mower.
0:00 Introduction
0:54 Removing height adjustment system and top cover
2:55 Removing drums
4:07 Drum disassembly explanation
5:19 Drum disassembly
6:57 Bearing removal
7:52 Reassembly with new bearings
8:37 Reassembly of bevel gear
8:56 Grease
9:28 Gasket
Created using only open source software:
Shotcut
Pinta
SimpleScreenRecorder
Qpdfview
Manjaro Linux

Пікірлер: 10

  • @RustNRestoration
    @RustNRestoration24 күн бұрын

    Very very good video! Thank you we are just stripping one down for the spare parts which has been in a hedgerow for years, the drums are rusted on, rust is the best loctite you can get😢

  • @shishirsharma9569
    @shishirsharma9569 Жыл бұрын

    Your voice is very calming.

  • @joelbruneski6486
    @joelbruneski648611 ай бұрын

    I have a different mower (Fehr KM22) but I found this very helpful. Wish I could find a manual like yours, with some english in it🙂 Thanks

  • @Spannerman_

    @Spannerman_

    11 ай бұрын

    Glad it was helpful! I think most drum mowers are indeed pretty similar, and I was able to download the PZ one (multi-language) using a simple Google search. Maybe that's a good option for you as well.

  • @neilharding8826
    @neilharding8826 Жыл бұрын

    hello , please can you describe how you removed the top drive bar please

  • @Spannerman_

    @Spannerman_

    Жыл бұрын

    It's bolted to the drums. Remove the bolts as in 3:02 (in the video they have already been removed).

  • @orkidknog4147
    @orkidknog4147Ай бұрын

    i have one of these the drum nearest to the tractor wheel has stopped working but the other one is still working so where / what do you think the trouble could be thanks

  • @Spannerman_

    @Spannerman_

    Ай бұрын

    What happens when you turn the front drum (tractor side) by hand (tractor off obviously)? Does the belt pulley turn or the rear drum? Or none? Then check what happens when you turn the rear drum by hand.

  • @orkidknog4147

    @orkidknog4147

    Ай бұрын

    @@Spannerman_ nothing moves when truning the one near to the wheel. second drum turns the belts and pto. theres no noise when i turn the first drum no gratteing or grinding just turns freely

  • @Spannerman_

    @Spannerman_

    Ай бұрын

    @@orkidknog4147 Souds like something must've broken or sheared off in the drive of the first drum. In any case you'll have to remove the top cover to see what's going on.

Келесі