I like this project and I made a frame for an lk35 pack using schedule 80 pvc . It is better for use even in cold weather but the way you did this frame is great. After you glue it thoe I would drill holes at the joints and using pop rivets reinforce the frame at the joints for added strength because the glue does wear out in time and it will help don't forget the slight bend at the top of the frame for added comfort with a load in the pack also I found with my frame to allow more air flow between your back and frame/pack I would use heavey duct canvases and sew it together length wise fold it at the ends at least 3 times wide enough (about 2 1/2-3 ) inches and sew that for a seam then punch three holes to each end so that you can use paracord to wrap and lace tie around the frame to make a back saddle for comfort. It will allow more air flow while wearing the pack. The idea of a platform weave for the bottom shelf is fantastic I would use either a narrow but strong webbing or 1100 lbs paracord walmart Carrie's it ( fairly inexpensive ) and it lasts almost forever. Let me know what you think and if it helps. Thank You.

@JoeDeerRunner

7 ай бұрын

Thanks!

Awesome!...thanks Joe...i believe the Alice will always be with us in one form or another.

@JoeDeerRunner

3 жыл бұрын

Indeed. It's very versatile

That's a great DIY frame project. I do like the way your first frame looked with the webbing. I got to keep this build in mind for my next back pack project.

@JoeDeerRunner

3 жыл бұрын

Thanks!

Great video Joe. It’s been about 10 years since I’ve used an Alice pack. PVC glue is a great idea also.

@JoeDeerRunner

3 жыл бұрын

Yeah. When I originally tried this, had a problem with the pipes popping out at inconvenient times.

The pvc frame has been a good project for many. Great video. How come you haven't upgraded to the molle system

An idea from the very dim and distant past. Last time I had an external pack frame (aluminium that time) I drilled a hole at one of the ends and would put a bow saw blade in it so I could botch together a bowsaw at the camp. Could do that with the pvc frame. I'm trying to figure out making a pvc pack frame for a Norwegian Telemark pack at present. It's all leather shoulder straps and no padding so is going to take a little work to get up to the standard I want. Should film it, no one else has done it on YT.

@JoeDeerRunner

2 жыл бұрын

Now you made me want to get that pack and see if it can be done. LOL

That’s a great MOD, new sub from KZread creators 👍

@JoeDeerRunner

3 жыл бұрын

Thanks!

cool project, would appreciate an update after you have used it,

@JoeDeerRunner

3 жыл бұрын

Count on it!

👉👍👈

@JoeDeerRunner

7 ай бұрын

Ok then

Have you tried filling the PVC frame with flex seal or something? For extra strength and durability.maybe just at the connections

@JoeDeerRunner

3 жыл бұрын

Planning on using PVC pipe glue, but using flex seal does have merit. May consider this.

Soooo.... what are you using for a hip belt?

Sorry for my bad english but what's the max amount of weight can it hold?

@JoeDeerRunner

5 ай бұрын

Maximum weight I had in it comfortably was 5o pounds or 22.67 kilograms

Good job. That’s a great idea I appreciate you sharing. Also I like what you did with your channel. You have my subscription would love to have your support as well.? Keep up the great work. ATB Joe