Probably the best directional boring video I have seen, and it is big pipe to boot!

Cool, didn’t know they bored and pulled back on pipe this big. Only ever seen this done for a couple of 4” comm ducts or gas pipes. Great vid.

Thanks for taking the time to convert. I honestly had no idea it was that big of a gap.

I didn’t even know that sort of thing was possible, mind blown!

Thanks for the clip good brief of horizontal

Good job, Thank you for your information.

Interesting work nice set up

That's pretty awesome!

The info. On this video states this is a 722 ft long 43.3 diameter high density polyethylene fused pipe. And pulling of the pipe back through the trench took only 2hrs. The drilling , I would think took half a day maybe longer. Impressive, would love to own this equipment. Thanks

@apatriot1762

2 жыл бұрын

Drilling takes a bit longer, a series of smaller rheemers were pulled first , scaling up to meet the 44” pipe size

@mfasiu

2 жыл бұрын

We have a requirement for this, to pull 800mm sdr21 pe100 gas main. Any suggestions about who could carryout this work for us Many Thanks

Brilliant engineering - preserving the streetscape and reducing traffic disruption. 😃👌👌👏👏👏

@rossskeller1701

3 жыл бұрын

You're right about that but you're never going to win people get upset with 10 seconds hold up may as well dig a dam and fill it back in with the pipe

@kimintri3357

3 жыл бұрын

😎

I love Dutch marine- and civil engineering!

Awesome work guys!

In my city, they usually just open up the road. There's rock outcropping all over the place, it's typical to have a rock hammer laying around on construction sites. Recently, they needed to have a pair of pipes go under an active railway. Bedrock at that location is quite literally right under the asphalt. They dug a pit, set a horizontal drilling rig and pushed a steel pipe with tooth straight through the rock.

that looks harder than drilling a vertical well. 👌good vid

@jamesf3148

5 жыл бұрын

Civil engineer here in the pipeline industry. It can be harder in some instances due to the lack of solid Rock, loss of pressure (frak out) is pretty common and losing the hold behind the cutting head is a pretty real problem in clay heavy soils but generally it's pretty easy. Drilling.this is the pull back ohase which can't have complications but is for the most part easy.

Awsome job Guys.

I always laughed about the ground rollers when ur pulling the pipe thru the ground!!

@mjdegn

4 жыл бұрын

Courtney Shoemaker keeps from tearing up the grass/sidewalk/anything on the surface

@raynic1173

3 жыл бұрын

@@mjdegn and damaging the pipe! the pipe in the hole is being lubricated by the slurry mix!

@johnnydoe7846

3 жыл бұрын

Any reduction in drag you can get is good.... especially when pulling miles of pipe.

@GVALNIER

3 жыл бұрын

Is also necessary to not bend the pipe permanently.

great video, nicely done.

@ 3:48, I'm glad to see they protect their tree's. Here in the states they would have cleared a 300' wide swath on either side to pull that pipe in.

@jamesf3148

5 жыл бұрын

No we wouldn't have. Just factually we wouldn't destroy that much tree for temporary work space cause we'd be required to fix it.

@jamesf3148

5 жыл бұрын

And also I was litterally just on a job were we pulled a pipe and had to set up plywood to protect the trees.

@johnnydoe7846

3 жыл бұрын

Truth be told... it totally depends on the location.

wow amazing. Pipe bursting in action! 700+ pipe , wow. I'd assume these come in sections and you fuse them on site?

EXCELLENT vid ✔️

@BBQHoorn

7 жыл бұрын

Thanks, John :)

@ericagazzola9878

5 жыл бұрын

Fent

Nice work👍👍👍

How big was the pilot hole for the 36 in pipe? 6 inch?

Very good ! How do you de-water or keep the pipe from floating ?

@dannix136

5 жыл бұрын

And bentoniet

@batmann2370

5 жыл бұрын

this is clearly a pump fed line, any directional bore is either forced or water main due to the drills dependency on riding the rock or bouncing off large infractions

I love it! My crew is doing this tonight, only with 300’ of 8” HDPE. We subcontract the boring/pipe pulling. I’ve never seen it done. And our start/finish “trenches are 15’ deep (at least) and 20’ long, with shoring boxes in them. I’m curious how they can bore so accurately (gravity fed sewer line) and how they’ll pull the pipe through given the depth and shortness of the trenches. Company working from 9pm to 5 am since this job is on a busy highway and a lane must be closed. I have to cover the other work we do during the day, which is why I’m not there. Dammit I’m curious.

@BBQHoorn

3 жыл бұрын

This became a pretty common thing here, there's no bedrock in my country so that makes it easier. Where are you at?

@spidermight8054

3 жыл бұрын

@@BBQHoorn Southern California.

@Thisisjs96

Жыл бұрын

@@spidermight8054 I do horizontal drilling what company are you because I drill in all of Southern California also you have a very big pit honestly and the ground is good in some parts to be very precise with depths

Does lateral compression of the soil ever jeopardize road surfaces or adjacent underground utilities?

I am very happy with this job.. I have worked for 10 years in this horizontal directional drilling hdd drilling company.. I am a general worker.. I really understand what I have to do when I work... from starting to prepare things, to complete equipment work work, and so on.. i really hope you put me in your company for work sir i used to work in malaysia 10 years in this machine work my name is irvan from indonesia i migrated to malaysia this project work 11 years and 10 years working in the field this pipe machine,,, sir, I work in your company, thank you very much

I've seen this done on a much smaller scale (smaller pipe) running a new sewer pipe into someone's house. Kinda interesting.

Good job sar

No idea why KZread recommended tugging a poopoo pipe video to me.. but ok fine I'll watch it

I'm a HDPE pipe welder. I have 3 certificate now I'm work in UAE I proud of my work🥰

@sachinkamble2619

3 жыл бұрын

Hi imran, that's good to know. I work as project engineer in HDPE piping projects in mumbai

Hi, Thanks for sharing video. I want to know how sewer will flow through the HDPE pipe? 1. Gravitational flow (sewer flow as a result of difference between height) 2. Pressurized flow (by pumps as a result of pressure differece) Regards

@BBQHoorn

8 жыл бұрын

+Zaman HASANOV #2, pumps.

@teyton90

7 жыл бұрын

How many pumps are there actually? How many are necessary for let's say 1 kilometer?

@BBQHoorn

7 жыл бұрын

Hi, thanks for watching. To answer your question ... I believe there's just one. I was just an observer with a camera :) The best way I can serve you right now is to refer to the contractor if you want to know further details: www.vanvulpen.eu/nl/nl/1/home.aspx

@teyton90

7 жыл бұрын

BbqHoorn thank you! take care

@mannynunez9361

5 жыл бұрын

Szr7zMix5kcV6F3 if it's taco Tuesday its all of them including backup mobile pumps!

Amazing!!!

Вот сразу видно все как у людей , есть чем помыть , кран стоит и штанги руками снимать не надо , ПРОСТО БРАВО !!!!!

@nyxoBblu

2 жыл бұрын

А где-то иначе? Я вот не видел ни разу, чтоб штанги руками пердолили, обычно штабель тут же рядом с машиной укладывается автоматом. Единственное что меня улыбнуло, так рабочий с чинариком в зубах моет из шланга штанги. Все как у нас, и бурильщик поди в шлепанцах.))) Да, и колеса авто при выезде на дороги со стрйплощадки, у нас уже давно и почти везде моют. Ибо пи..дюков можно выхватить на раз два.

I love this

Good job guys.

Pipe is butt fused and done with directinal drilling. Done it many times in the uk.

Do you not have to de-water before insertion?

Now that is some massive power.

Nice HHD

nice job

Excelente 🇩🇴🇩🇴🇩🇴🇩🇴🌎

Favor enviar informacion tecnica , certificacion , personal de contacto

So what happens after?

Are pipe levels controlled؟

Pretty amazing.

where I live on vancouver island our excavators dont leave home without toothbucket. Netherlands have sandy silty soil that is easy to manipulate..

@danielroe845

3 жыл бұрын

I can't speak for Holland but certainly a lot of places we dig in the UK having no teeth is less to do with ground conditions and more to do with what might be buried in the ground. Old cities, old towns, all without any real services drawings make for unpleasant digging.

Jesus Christ that pipe is big. Wait for it...

Goeie video bedankt maat.

Why just today.. I was chatting with the landscaper, and he said the lawn irrigation line went under the driveway, and would be impossible to replace without digging it up... I said, no, I have seen gas lines pushed thru places... He said bad words.

@johnnydoe7846

3 жыл бұрын

Either your landscaper don’t know $h!t about pipelines or he’s totally dishonest and you should get yourself a new landscaper... honestly either way you should probably get yourself a new landscaper.... seriously.

In the UK we could of done this in twice the time, 3 times the cost and with a complete shutdown of all local roads and massive inconvenience to anyone who lives and works there THEN Just for a laugh we would do it again as someone didn't have the correct form filled in

@CyberMacGyver

5 жыл бұрын

thinfourth still quicker than Australia... 😉

@SupaNami

5 жыл бұрын

Right, and you guys still can't seem to learn how to drive on the *RIGHT* side of the road!!

@operator8014

5 жыл бұрын

Proud to be an American where we would fuck it up the same way. :D

@milldabeast519

5 жыл бұрын

canadian cities are under road construction all summer every summer. something we get used to

@John-jc3ty

5 жыл бұрын

pfft... in spain we would do it for 10 times the time and 50 times the cost.

Amazing

Do you ha e a video of the fusion machine used for this size pipe?

@johnnydoe7846

3 жыл бұрын

This may not be the exact machine they used on this project... but this one would do it... kzread.info/dash/bejne/qn2csbSakZrcaNY.html

Good job

wow nyc work

that's about the setup i had to get my 3 phase to my spa thru all those 90s

As a utility locator my only question is how the hell would I locate this pipe? I didn’t see and tracer wire on the pull back. Great Video super impressive.

@kylemodesitt2557

2 жыл бұрын

Put some green along the road and clear the ticket lol

@flipdaddy7778

2 жыл бұрын

Sewers usually aren't located

@romanbellon4099

2 жыл бұрын

Utility locators don't locate sewers you usually get with the city and they could've drilled it with mapping/ an azbuilt and turned the profile into the city after surveying the numbers in

@nickh3720

2 жыл бұрын

It will get located by a digger one day! And ther will be human waste pumped high into the air!

@davidlamont5793

Жыл бұрын

It should be logged in the council plans giving the exact depths and locations using the modern tech of gps ( an engineer with a trimble )

so apparently the fusion joints are stronger than the rest of the pipe.

@littlebuddy761

5 жыл бұрын

ObsessionPC yes they are you will pull the pipe apart before you break a weld

@joelamb6598

5 жыл бұрын

ObsessionPC this is true I use to fuse pipe

@bornonfire452

5 жыл бұрын

Hydraulic Fusion for that pipe 👍

@tbonemc2118

4 жыл бұрын

Not really. Thicker wall thickness because of the bead but that also creates the weak point. The pipe will break right next to the weld. Any miss alignment in the weld and varying wall thicknesses between pipes also de rates the weld slightly.

Вот как надо работать, даже деревья огородили чтоб не повредить, а у нас бы выпилели (мешают).

It remember me the oilfield jobs 😂😂😂😂, drill holes lol

Cartels of el chapo need This tool

@johnnydoe7846

3 жыл бұрын

🤫🤦‍♂️

like it, just wondered if the pipe was tested before thay put it in.

@BBQHoorn

5 жыл бұрын

sure, otherwise it would be a waste of time and money.

@jamesnelson7779

5 жыл бұрын

HDPE had been used for decades in this application and best of all it's all fused into one pipe so no leaks.

How do you go through an alluvial material with rock bolts? Is it possible? What parameters do you need from the soil study? ¿Cómo se atraviesan un material aluvial con bolos de roca ?, ¿es posible? ¿Qué parámetros necesitan del estudio de suelos?

A little explanation would have been nice. I assume they borrowed some tech. from the Oil Industry - as in a horizontal drilling rig.

@iowa3d353

3 жыл бұрын

I would be interested to know how they check the grade before they pull the pipe though.

@BBQHoorn

2 жыл бұрын

vanvulpen.eu/

I have never seen before because in my country the way is different. This is a good way.

Horizontal Directional Driling machines (HDD)

Back in the 70’s when i was doing this, we would hand pull that in.

@econchino

3 жыл бұрын

Back in the 60's when i was doing this we would use our beards to pull it, uphill, in the snow.

@JaayWizz1

3 жыл бұрын

Back in the 40’s we had slaves pull it for us

sehr beeindruckend ,diese Technik ! Das sind eben Holländer....die haben das im Blut...!! Weiter so mit solchen Videos ! Danke !

@BBQHoorn

3 жыл бұрын

Deutsche Technik ist doch auch sehr gut

Is that pipe or tube ?

Que bonito país si cuenta con infraestructura y hermoso clima de 🍂🍂🌴🌳🌴🌳🌴🌴🌲🌴💢🍂💢💖💘💖💣💜💚💜💗💙👋💙👋💙☔☔☔☔💧🌊☔☔🌂☔☔☔

curious how they had a tunnel hole going thru there beforehand; I suppose they bored the hole thru with a small rod and increased the diameter with larger bits.

@acidise1

4 жыл бұрын

Directional drilling to make the hole, then remove the drill, attach the puller head, Hook up the pipe, video shows the rest

4:59 how do I get that job?

Waww se jeant thank you very macht 👍👍👍👍👍

Who is else watching this in 2020 😅😅

@RichardNess

3 жыл бұрын

I'm watching it in 2010. want tomorrow's lottery numbers?

@pancernamarchewka5031

3 жыл бұрын

not me

@d5_87

3 жыл бұрын

Fun Is Here me

@kebo57

3 жыл бұрын

Watching it in 2021.

@nnikolov52

3 жыл бұрын

@@kebo57 Me too :) - 2021

The average dog is a nicer person than the average person

TO Build the modern civilisation IN 21ST CENTURY love it.

Couldn`t they have done that on the Channel Tunnel? With a wider pipe of course, :-)

Omg the drone ad that played during your video was so full of it 99$ drone retail $5,000 lmao

I see they waited for it to get wet before they started... what gentlemen!

I deal with those kind pipe hea on Kauai Hi we fuse 1” -36” inch pipe

@jonhare392

3 жыл бұрын

Eric Schiffer there's a big stack by the mill in Kekaha. I'm from Eleele

Sou Brasileiro e sou operador de navigator, tenho 8 anos de experiência. Tem uma vaga na empresa de operador de máquinas?

In South Africa this would have taken 10years ,1000 construction workers and then 20 government officials would have earned BMWs from it. And it would leak probably.

Ahh tuggers , 7 days set up , 1 day pull , 4 days tear down , 1 month clean up restoration .lol cheers .

The clevis bolts don’t look so good @ 1:45 The

Seen this done with a pipe line in the oil field.

Did that here on 495 under Beltway DC area

@waynemizer4912

2 жыл бұрын

Lot of shit in D.C.

My only question is I’d like to see how they planned it to keep grade on the gravity sewer this is amazing to watch

@BBQHoorn

2 жыл бұрын

It aint gravity. The contents are moved using high pressure pumphouses. Thanks for watching and asking.

@Thisisjs96

Жыл бұрын

It’s easy your bore shot starts at the deepest level and then gradually goes up like 2% maybe even 4% the whole way until you meet up at the exit pit beat way to do it is make your entry pit 2 feet deeper than your exit pit

What are those buoy looking things attached to the pipe?

@davidchevallier3202

6 жыл бұрын

The Notorious GHOST BL/_\DE pull heads

Good video. ♡ T.E.N.

Wow amazing... I like this

That's about how I lay pipe too ;-)

@theatheist4519

5 жыл бұрын

You need a crane and the help of 6 friends.... sounds awkward!

Wait ! Super stunt weeend ????? Whats that ?

should hae at least shown the drill end coming out of the ground instead of hole just appearing

а у нас бы перекопали просто пол города и всё :)

@user-vv7tv3mb2u

4 жыл бұрын

У нас именно так и сделали

@Slavaros1

4 жыл бұрын

У нас так все лето делают, могут и свежий асфальт перерыть

@DenuCify

3 жыл бұрын

@@Slavaros1 зато все работают =)

@user-yu3xx7rc9h

3 жыл бұрын

они просто не шарят что на этом можно зарабатывать))

@user-sq4bs1mh5k

3 жыл бұрын

Установка Горизонтального Направленного Бурения стоит денег причём не маленьких(её купить нужно прежде чем ты начнёшь зарабатывать)

I'm pretty impressed the ground not moning Lol

How much day for install that pipes? Compares to traditional method.

@Oxizee

3 жыл бұрын

within 1 day

i do HDD work in Malaysia.....our drilling machine LS 220...

I like this video. I need you to do this job for me in Vietname

@roopakgahlot4693

3 жыл бұрын

Hi are you still looking for this kind of work specialist? Write me if you have any project.

👏

Wow thats crazy

Мощный расширитель👍