PS3 FAT Bluray Cable Fix By:NSC
Ғылым және технология
Hi & Welcome at my Channel
Here i Show you how you can fix a brocken Clip so that u can use your Device again :)
Thumbs UP and Subscribe to my Channel :)
Peace
Hi & Welcome at my Channel
Here i Show you how you can fix a brocken Clip so that u can use your Device again :)
Thumbs UP and Subscribe to my Channel :)
Peace
Пікірлер: 153
THANK YOU! Your video saved my PS3. Just broke the clip earlier tonight while changing cooling paste. Was devastated when other videos said it was impossible to fix this. Now it works perfectly
@NSC-Modz
2 жыл бұрын
haha, thats NSC Style xD You Welcome ^^
Du hast mein Laufwerk gerettet! Hab eine Fat Lady mit defektem Blu-ray Laufwerk gekauft und war echt entmutigt, als Ich gesehen habe, dass der Clip komplett abgebrochen ist! Ich hab nicht die blaue Folie geschnitten sondern Plastik von einer Verpackung (Dose Heringsfilets XD) auf die richtige Größe zugeschnitten. Du bist mein Held für dieses Wochenende!
@NSC-Modz
2 жыл бұрын
hahah bist immer willkommen ^^
THank you SOOOO, MUch, Sir. I just open my 2007 60gb Ps3 today to replace the thermal paste, snapped my blu-ray ribbon clamp putting it back together. Lost all hope until I roamed to this video, Tried your 1st method, now my blu-ray drive is working again. Back in business. Thank you So much!!!
@NSC-Modz
7 жыл бұрын
You Welcome :)
@alexandrebouvier7731
7 жыл бұрын
Same thing (with the CECHA01 too), These connectors are reallly fragile.
Before using your method to fix the connector, my PS3 40GB wasn´t read any disc anymore, but now it works just fine. Thank you very much. Jan.2017
@spacemx
7 жыл бұрын
One of the problems I noticed was that the disks did not spin until I corrected the connector problem. So one more time, thank you.
@NSC-Modz
7 жыл бұрын
No Problem, you welcome :)
Thank you very much! The solution with the blue plastic bits worked like a charm :D In my case, I didn't have the black bracket, but I did have a spare blu ray ribbon, that had the blue plastic bits. Also I didn't glued them together, I just carefully placed the first bit and then pushed the second bit (with a bit of force) over the first bit. The cable is so tightly held that I had difficulties trying to get the plastic bits out. Thank you very much for the advice :D
@NSC-Modz
Жыл бұрын
Just saw this comment right now 😆 You always welcome
Worked amazing for me. Decided to repaste the thermal paste on my Fat ps3 that i bought from goodwill and accidentally broke the clip when rushing to put everything back together, thank you!!!
@NSC-Modz
7 ай бұрын
You always welcome bro.
Thank you for showing this I was trying to figure out how to make the Ribbon cable to sit on tight but when I saw you your KZread and try it lucky I still had that piece and it works thank you very much
@NSC-Modz
2 жыл бұрын
You welcome
Danke !!! Nsc hab dich in meiner psn liste ich hatte die paste getauscht und dann ist dieser clip abgebrochen aber dann hatte ich an dieses video gedacht und es funktioniert
Thank you for this fix. It was very frustrating that these clips kept breaking on me and tape was not working.
@NSC-Modz
6 жыл бұрын
You Welcome :)
Thank you so much, it's really hard to find replacement or videos with this especifictly issue in 2023, thank you so much, yoy really made my day
@NSC-Modz
Жыл бұрын
You always welcome 😀
Such a sabra - love your accent, broseph. :)
Das ist mir heute das erste mal passiert... Aber dank dem Video ist alles wieder Gut :) Habe es stundenlang mit Heisskleber versucht ...
I just broke mine on my phat while doing a clean and re-paste, many thanks for the tip !
@NSC-Modz
2 жыл бұрын
You welcome 😀
Worked great, thank you!!!
Video is so useful and your trick is very helpful!
@NSC-Modz
8 ай бұрын
Thank you very much
thank you so so so much. this worked great. keep up the great work.
@NSC-Modz
Жыл бұрын
You always welcome
Oh man u saved me when i broke that plastic peace. But good job coming up a solution. And i hope your english got better now in 2022 😄 jk
@NSC-Modz
2 жыл бұрын
Yeah i think it's better than 10 years ago 😂
Hey UltraNSC I have a question for you. I got a 60gb CECHC03 ps3 and it doesn't display anything. Theres a slight flicker on the tv screen when it turns on when using the av cable but thats it. Theres no flicker when using HDMI. If I put a lot of pressure on the rsx the display shows then crashs if I release the pressure. What do you recommend?
I have a PS3 with broken do you know how to fix the red wire when it's cut off
Muchas gracias. Me funcionó 👌 ya estaba pensando en desechar mi ps3 fat retrocompatible.
@NSC-Modz
3 жыл бұрын
Sempre bem vindo :) Gracias a ti 😊
@miroslavolopez7301
2 жыл бұрын
Jajajaj como se te ocurre decir tremenda tontería por dios
This is fucking good shit. I have been looking through a bunch of fucking ribbon replace/repair videos but NONE kick ass like yours!!!! 👍🏻👍🏻👍🏻👍🏻👍🏻 My fucking connector lever broke too for my ps3 which I am fixing. Got it repasted after getting the red of light of death. Lol. So I fired it up and i got an error code at 87% from the update. Many say it’s my blue ray drive cable (which I taped in place). Luckily I have the little black part that broke. Now I am going to cut the ends and do as you did and then. My freaking connection is solid thus enabling me to update my ps3 and get it back to running This video was fantastic I am sure this technique would work on any motherboard that has the same type of connector! You are awesome brother.
@NSC-Modz
3 жыл бұрын
Yeah, that's true, it works also for all other Boards :) You always welcome ✌
I don't understand where this is on the PS3. I can't find where to connect the ribbon too! I just found out disconnected recently, and have no idea where to re-connect it to!
Hello NSC, i need one advise from you. I have this PS3 when you insert the disc ( BLU RAY MOVIE, GAME OR DVD) don’t read the disc, when you insert a CD the PS3 read the CD but later say "THE DATA IS CORRUPTED” . You know about this issue. If you do please let me know. Thank you very much.
Sir, thank you so much. I tried to update a broken ps3 i got from kijiji . Which I fixed (had red light blinking) but I remember I broke that pin ...then after updating got an error 8002F14E..... long short story, after watching your video, I though it was that pin and followed it and now I fixed it again. cheers
@NSC-Modz
3 жыл бұрын
Nice Bro, you always welcome :)
@BigOHavingFun
3 жыл бұрын
This exact same thing happen to me after repeating it. The clip broke and got same error code. I will try this technique later.
Master method thanks a ton subbed
you know how to fix the red wire when half of its cut off the other side is cut off but the other side is in still
You are a genius sir. Do you still so PS3 repairs/mods?
@floodforest
7 жыл бұрын
*do*
YOU ARE GREAT!
@NSC-Modz
2 жыл бұрын
Thank you so much ;)
2021 GREAT JOB THNKS
@NSC-Modz
3 жыл бұрын
Thank you very much :)
So geil!!! Du mit soo also😅😂 Dieser Akzent😉👌
I was working on it and someone at home closed the clip with out the wire in it and now it won't open. Any suggestions?
@NSC-Modz
7 жыл бұрын
Just try it slowly, no try, no fly xD
Thank you my hero
@NSC-Modz
4 ай бұрын
You always welcome
it worked but now my disc is stuck in the blue ray drive but when i put the disc in the console it worked.
BEAUTIFUL!!!! your going to break it intentionally... 🙀 but Yes.... no glue but used some alien tape... the little metal contacts started trying to peel as well on the ribbon.
@KatrinaAune
3 жыл бұрын
EXCELLENT!!!!!!! ..... YEEHAW!!!!!!! I knew that one little metal prong was probably the one that was reading if there was a disc in it or not..... BOOM!!!!!
@NSC-Modz
3 жыл бұрын
@@KatrinaAune Hehe, you welcome Homie ^^
thankyou!!!!! works now time to kick off in fifa xD thanks!!!
@NSC-Modz
7 жыл бұрын
You Welcome, LIKE & SUb. :)
@jeanqui339
6 жыл бұрын
Hi the blue thing also popped out from ribbon cable when i tried tape on it. Does it matters?
You are a just Master ! 2 days with 8002F14E error code ... you save another PS3 ! Peace
@NSC-Modz
2 жыл бұрын
You welcome 😉
I used a credit card in the socket and it's works (for now).
Hey.... Ich möchte meine SLIM Downgraden wie du es in dem Video gemacht hast wie es schnell und einfach geht.... Meine PS3 ist aif 4.70 OFW... Brauch ich da ein anderes Flashtool? Und ich habe nocheine Frage.... Wenn ich geflasht habe und danach Rogero 3.55 installieren will, muss ich ja mein Laufwerk anschließen, aber mein Laufwerk liest keine CDs mehr.... Macht das was? Danke im voraus
@NSC-Modz
9 жыл бұрын
FurryTV Hi Ich bin im Moment sehr beschäftigt...Backup ziehen, mit PS3 Flash Tool 4.50 Patchen, dann Flashen, Rogero Downgrader, Rogero 3.55 v3.7 über das Recovery Modus, dann gewünschte CFW Lg.NSC
Hi there, the blue bit on my ribbon came off that plugs into the opposite end to whst your showing on the video, I glued it back together and plugged it in but now it doesn’t seem to be working or responding at all when I insert a disc any ideas?
@NSC-Modz
4 жыл бұрын
Hello why glue, what if you need to take it off again?
@TheLoneRanger1992
4 жыл бұрын
NSC Modz i have only glued part of the ribbon (blue bit) back to the rest of the ribbon as the blue bit came off from the rest of the ribbon then I have plugged it back Into the port but there is no response from the drive at all
@NSC-Modz
4 жыл бұрын
@@TheLoneRanger1992 check the contracts, hope it's not dirty with glue. And if the cable has no real pressure to the contacts, then it will not work.
WTF!! this shit really worked! thx NCS
@NSC-Modz
6 жыл бұрын
You Welcome :)
Doesn't give a reliable connection. I even tried taping mine with Kapton and applying light pressure with some foam under the BD. Sometimes works, sometimes does not.
Hey! Ich hab ne ps3 fat (chec) bis heute noch läuft sie einwandfrei hab 2 mal staub entfernt aber bis zum kühler trau ich mich nicht zu wegen der paste. Kann ich nicht einfach vorsichtig löcher unten machen ohne die ps3 bis zu kühler zu zerlegen?
@emregunter8216
9 жыл бұрын
Ps: Meine ps3 ist jetzt 8jahre alt :)
@NSC-Modz
9 жыл бұрын
Emre Günter Welche Version ist es genau? CECH-( ? )
@emregunter8216
9 жыл бұрын
KO3
@NSC-Modz
9 жыл бұрын
Cool :) Die K03 ist flashbar, und auch bald wird deine PS3 überhitzen ^^
@emregunter8216
9 жыл бұрын
Was ist flashbar :000? Kann ich nix gegen das überhitzen tun?
I think mine might have another problem because this fix didn't work
@NSC-Modz
4 жыл бұрын
What is wrong?
I would give anything to see how the other side of it gets repaired
Can u post a video on how to fix PS3 slim turns on them off :(
@NSC-Modz
9 жыл бұрын
zZKINGXxRTM it´s an YLOD nothing else mostly
hey kannst du mir noch mal helfen? habe grade fertig Downgradet und habe 3.55 Downgrader kommt immer Fehler Daten sind defekt bei anderer cfw
@RonicsGamer
9 жыл бұрын
BeAsTSkillzz Hast du skype ich kann dir helfen?
@TobiM98
9 жыл бұрын
habe es schon hinbekommen danke
@NSC-Modz
9 жыл бұрын
BeAsTSkillzz nach dem Downgrader über Recovery Modus Rog. 3.55 v3.7 installieren. Lg.
Fine work brother
@NSC-Modz
8 жыл бұрын
+DUDNAZTY Thank you very much :)
@DUDNAZTY
8 жыл бұрын
+UltraNSC u an electrical engineer/technologist? I am. Your description is great it mm m m cwill help others who are unfamiliar. Overall A*. Btw electrical tape mmcfjfgjkk
@DUDNAZTY
8 жыл бұрын
+DUDNAZTY tape works wonders lol
@NSC-Modz
8 жыл бұрын
sure, like second glue ^^
Wish I Knew this earlier :_:
Can you do a video on how to fix the cmos connector?
@NSC-Modz
4 жыл бұрын
As i have time yes ;)
@jeremiahb3421
4 жыл бұрын
NSC Modz I looked all over KZread and the Internet for videos on this issue but couldn’t find any and you are the only one that produces consistent genuine content about PS3 systems I have the 80 GB backwards compatible system . You give much help thank you in advance 👍
@NSC-Modz
4 жыл бұрын
@@jeremiahb3421 np you welcome, can you upload a pic for me, so i can take a look on your issue.
@jeremiahb3421
4 жыл бұрын
www.psx-place.com/threads/ps3-fat-broken-motherboard-battery-connector.29492/ There is another user with the same problem it’s on this website.
Man I Accidentally Broke A Thin Copper Thing From My Blue Desi Cable attached To The Power Button In my Super Slim Ps3 Can You Tell Me How To Fix It?
@NSC-Modz
10 ай бұрын
Can you upload me some pics?
@thehokage6039
10 ай бұрын
No Wait Im Sorry That Problem Is Fixed i Was Talking About The Flex Cable Or You Could Say Ribbon Cable But Now The Main Problem Is With That Hook Under Neath The Disc Drive That Helps Spin The Game I Guess Something Is Wrong With The MotherBoard Of That Hook Pls Help Me With It @@NSC-Modz
Dude, just grab a business card, cut it to fit, wedge it in there. Boom done.
@NSC-Modz
3 жыл бұрын
This video was 5 years ago, but yeah, thanks xD
Do you or anybody know a replacement for the cable itself I cant find it anywhere
@NSC-Modz
2 жыл бұрын
You mean the ribbon flex cable only or the connector?
@chylinz4973
2 жыл бұрын
Never mind found one on some random Canadian site lol
@NSC-Modz
2 жыл бұрын
@@chylinz4973 ok xD
Thank u soooo much brother :)
@NSC-Modz
8 ай бұрын
You always welcome :)
My fat ps3 does not display any screen whatsoever, do you have a fix?
@Evaldas65
9 жыл бұрын
Melvin It's called the Green light of death. Sometimes a reflow fixes it and sometimes the RSX needs to be replaced. I'd suggest doing a reflow first.
@noz3m
9 жыл бұрын
EvkaX155 Thanks, ill see if i can try the reflow myself. My ps3 is jailbroken will i lose my jailbreak then?
@Evaldas65
9 жыл бұрын
Melvin No. The jailbreak will stay.
@noz3m
9 жыл бұрын
EvkaX155 Thanks!
Thanks bro, i'm stuck on the update loop (ps3 won't update ot boot without all parts plugged on) because of this broken clipper, i can't manage to make it work. I'll try it
@NSC-Modz
9 ай бұрын
Yeah, do it nice and sexy and it will work :)
@Lemsa42400
9 ай бұрын
@@NSC-ModzIt worked 💪💪
@NSC-Modz
9 ай бұрын
He'll yeah bro. ✌️
I just noticed I was like 222.... THANK YOU SOOO MUCH!!! ✌️
@NSC-Modz
3 жыл бұрын
Hehe you always welcome! ✌
How can I fix my own
@NSC-Modz
Жыл бұрын
Like on this video 😀
U say ...very very diffcult..lol..can i just send it to ya..lol😊
@NSC-Modz
13 күн бұрын
It conforms, maybe its easy for you xD
*do*
NSC i mean my bad;)
Resolder a new connector og
@NSC-Modz
2 жыл бұрын
And you think people's can resolder a new connector without soldering skills? 😂
@SgtGrimey
2 жыл бұрын
I followed your advice and was able to replace 2 nec tokins without any heatgun skills. If anyone can do it its you
@SgtGrimey
2 жыл бұрын
Is it possible?
ah ja was sony manchmal für Schrott macht und das nett man this is for the players
@NSC-Modz
8 жыл бұрын
+GTA4haterHQ Besser hätte ich es jetzt auch nicht gesagt ^^
@gta4haterhq
8 жыл бұрын
wann kommen neue ps3 Videos
@NSC-Modz
8 жыл бұрын
immer wieder ^^
Dude Thank you
@NSC-Modz
Жыл бұрын
You welcome bro.
@StickPro
Жыл бұрын
@@NSC-Modz dude please help me out. I followed this tutorial and finally my PS3 escaped the update loop but the disc drive will not accept disc anymore. Before the update loop it was working.
@NSC-Modz
Жыл бұрын
@@StickPro Maybe check the cable again if maybe the laser is already some kinda damage.
@StickPro
Жыл бұрын
@@NSC-Modz nvm it’s ylod
@NSC-Modz
Жыл бұрын
@@StickPro what happened?