So so good!!! mad love and respect ✊

@marceltimmers1290

6 жыл бұрын

Hi mate. You expected anything else? This man is good.

@jimmydiresta

6 жыл бұрын

Marcel Timmers excellent as expected

@MarkWladika

6 жыл бұрын

Excellent and totally entertaining.

@nath_tayl0rr

6 жыл бұрын

jimmydiresta indeed one In my life when will they be available, great idea for a collab between you both

@_P0tat07_

6 жыл бұрын

Can I have the prototype :D I love both your channels!

ToT! NOT standard threaded ends, so that standard fittings can be used! Use unconventional left handed threading, so that fittings are proprietary, and can only be sourced from you at great cost!

Thanks a lot Tony! I downloaded the same app to save a little on abrasives, and long story short, you owe me a new phone.

@asdomega

6 жыл бұрын

Michael Harris could you provide me the Playstore link ? ;)

@emeltea33

6 жыл бұрын

Michael Harris - it's your fault you ruined your phone. Tony obviously didn't use water. Might need to try with one of those water proof cases next time. J/k, lol.

@sarge152cliff4

6 жыл бұрын

virtual sand paper can be purchased thru Charmin

@jonhunt5408

5 жыл бұрын

Works ok for me, but I found the deburring app works better on iOS...

@trashes_to_treasures

5 жыл бұрын

I got an iPhone 5 that constantly keeps hanging up itself and freezes the screen for a minute or so. So, I'd recommend something newer to prevent you from freezing all the time and therefore maybe ruining your material for stopping the sanding process and having to start again. Also, the files that I use don't really work, takes like hours until I see some results. Did someone make experiences with these "audio files" everyone is talking about? Are they comparable to an air file? I might try these for better results. Napster does file sharing, right? I wouldn't wanna buy them and then realize they don't work as good as expected, so borrowing some would do the trick first. Ultima ratio I'd consider watergate files. They remove everything, including governments, I heard. But since I'm a beginner still, I might start with some less expensive tools...

not gonna lie... that test shot and glass noise 15:09 got me! My heart jumped!

@WARLOCKGPB

6 жыл бұрын

yes ! , then i almost peed laughing hahahah

@HouseofChop

6 жыл бұрын

Indeed! Total LOL moment. Watched it a few times just for the pure enjoyment of it all.

@gyrenrockz

4 жыл бұрын

i almost died laughing...

@pouyan225

Жыл бұрын

I'm late here but man I'm dying LOL 😂

@GardenGuy1943

Жыл бұрын

I have chronic heart failure.

I watched this, and now I need to see DiRest-of it

@tophan5146

3 жыл бұрын

Can you give a link? I couldn’t find it.

@joshnelson1801

3 жыл бұрын

Did anyone find the video from diresta's channel or did I miss that one when I looked for it

Tools, humor, and camera trickery...my favorites!!

I laughed way too hard at the sandpaper app. Tony, you never cease to impress me!

@ThisOldTony

6 жыл бұрын

it has wet/dry too, but don't use it unless your phone is waterproof. ask me how I know.

@zanpekosak2383

6 жыл бұрын

This Old Tony LOL!😂😂

@SlobberDragon

6 жыл бұрын

What could you have possibly been doing to prove that? Does oil distort it at all either?

@lorenzo42p

6 жыл бұрын

try the belt sander app, but watch that hair trigger.. still looking for my phone after that mistake.

I really enjoy the little extra things you throw in there. Cutting the aluminum with the scissors, using the sandpaper on the phone, the recoil of the air gun, the using of the calipers to zoom in. Its those little touches that really make your videos that much more enjoyable to watch.

Hey Tony, why are your video so satisfying :) Love em

@jazzyjay1150

2 жыл бұрын

Hope he is well, maybe a Alex reach out could lift the spirits?

Man, I love your videos, Tony! You're one of the few creators whose content is worth going back to past episodes and watching!

@Qthefun

4 жыл бұрын

Seconded!

This is one of those "Why is this a product already?" Ideas. So awesome! Great video too.

Man.....I had such a crap day at work....Came home, hopped on KZread and found this. Life aint bad.

@chrislee7817

4 жыл бұрын

Hay, you are my twin ! 😀

WOW, the multitalent carpenter master and the machining video virtuoso do a collaboration, this video is a dream

@Neffers_UK

6 жыл бұрын

Yeah man, the YT maker / machinist world is fuckin awesome. To the "professionals" they may seem like hacks but for the average guy like me, I look up to them. I wish I had the facilities to do a quarter of the stuff they can do, but I'm happy watching cause they are maing shit, not just talking about making shit. There's too many YT maker guys to mention, and it's effin awesome.

@kilerkai

6 жыл бұрын

ey dude, i work in an industrial production shop and i can tell you half of the guys there coudn´t do what they do

@wangchi623

6 жыл бұрын

Something something clickspring something

Metal, precision and comedy.... brilliant as always : )

Most excellent as always Tony! ATB, Robin

Yep, gonna need one of those. Thanks, Tony!

Your videos are some of my very favourite on KZread! Great projects, great explanations and awesomely solid dad humor! The kick from the airgun almost had me spewing my morning oatmeal out onto my laptop! You are an absolute hero!

Jesus... I absolutely just love this channel. Gotta be the best channel on the tube!!!

I didn't notice how happy I get seeing a new TOT video until now

Best colab ever!! love you both guys!

You are a genius. Your range of skills is unsurpassed.

Holy crap. Mr Diresta and you working together using NYCNC plates? That's half my youtube faves!

Beautiful! A piece of art!

As usual, it's been a "blast" watching your video. Thanks for the laughs and the idea for a new blow off tool. Great stuff man. I do truly enjoy watching these.

Yes. Yes. Yes. Yes. Yes. YES!

Every episode I watch of TOT makes me realize that if he wasn’t bound to the confounds of his containment unit he would literally take over the world. He’s too powerful.

Thank you Tony that was both hilarious and amazing!

Awesome! Now that you and Jimmy have collaborated, there is no telling what awesome inventions we'll see in the near future! Great job!

Oh yes!

@Accolade.

6 жыл бұрын

share them both with a new video :D

@Neffers_UK

6 жыл бұрын

HTR, your vids have been awesome of late. The paper cutter was superb. Is there a follow up with the tool you restored for Mr Diresta? He's not mentioned / shown it yet.

@HandToolRescue

6 жыл бұрын

Thank you! I found a hairline crack in the cylinder that was allowing air to enter and causing the drill to not run properly. I need to either fix it or find a replacement at some point. I sent Jimmy the Cutawl I restored as a thank you.

@ 15:10 had me 😂 on a packed commute. Excellent video, fantastic tool and just the right amount of humour. Top draw man!!

I keep coming back for more. Thanks for another inspiring video

I find I always have a smile on my face watching your videos, well done.

I don't laugh much, but when I do, it's on a This Old Tony video.

The CAD workflow/tipsntricks/how to dress video would be super appreciated!

@2lefThumbs

6 жыл бұрын

iwtommo yeah particularly the how to dress part, not sure that's covered in any other tutorials I've seen :D

pretty darn cool, love the design discussions.

Your builds never fails to satisfy. Keep up the good work!

There's one thing that I'm sure of now, YOU are the guy that all of your friends want to hang with ! Got the skills and the humor AND the personality,........ just don't run for any kind of public office, that might mess you up in the head ! 😆 That sandpaper app would come in handy, but I think I liked it better with the texture, looks good anyway! 👍👍 Thanks for sharing and take care.

@ThisOldTony

6 жыл бұрын

thanks Ken!

The phone gag was epic.

Just delicious as usual. THanks Tony!

Great episode!! Love the phone abrasives. Shout out to Jimmy too Jim

What ever happened to the air gun did it go anywhere I can't find any videos on Jimmy's Channel wanted to see follow up

The dream team has been formed!

@nixie2462

6 жыл бұрын

I respectfully disagree, Sfefan Goteswinter is missing here. XD

A This Old Tony and Diresta colab... awesome! I love it. Both of you are my favorite people on KZread, as well as my undeclared mentors. Keep up the amazing work. I love you both

Tony you are on point. I love your style. I can't get enough of the sans paper app and the cutting stock. Hilarious!

I have really been loving your content! I binge watched all of your videos over the past few days. I have to say you are one of my favorite people on youtube for your humor, video editing skills, and wonderful use of machines. Hopefully I will be able to learn more from you in the future too!

@skamego

6 жыл бұрын

I'm always shocked TOT doesn't have more followers. You really can't too his videos in content or quality.

@ThisOldTony

6 жыл бұрын

Thanks IR!

@ThisOldTony

6 жыл бұрын

StrainGauge: I concur. Is a travesty.

Thanks Tony and Jimmy...looking forward to the cad and Jimmy's video(s). Interesting to bring the sketch in and trace off of it...have done it in AI and exported to acad. Would like to know more about how the port diameters and spool valve diameters were fingered, earballed or enginerded for specific flow and noise levels. Glad no one was hurt in the making of the knuckle blow gun proto and hope that sanding app doesn't get butt dialed...might be hard on the fingers and knuckles. Perhaps the final version could have a magazine of tips that ratchet into place and a slightly tapered spool valve for even more control. Always a pleasure to be able to watch class acts. ~PJ

@ThisOldTony

6 жыл бұрын

Thanks PJ!

You were killing it with the gags in this one, Tony.. Keep up the good work.

Completely Beautiful!!! Great work to both of you!

Your editing made it look like you drilled and tapped for the inlet and nozzle, put in the valve, and air flowed through solid aluminum. I would have expected drilling those long air passages would be a challenge and wanted to see if you used any tricks to do it.

@liveepically

6 жыл бұрын

Both inlets meet in the passageway that the valve is in. easy peasy. Drill the inlet and outlet straight in, then drill the valve body straight down.

@matthewlorfeld5412

6 жыл бұрын

Robert Szasz I was wondering about that! Thanks

@AlexSwavely

6 жыл бұрын

If you look closely, when he's about to drill out the nozzle mount you can see that he'd already drilled the air passage

@PeregrineBF

6 жыл бұрын

It's Tony. He just smacked em with a center punch, that makes a perfect hole every time.

@RGSABloke

6 жыл бұрын

Alex Swavely Ah yes, got it at 7:30, not paying enough attention, I should go to the bottom of the class. Cheers. Joe.

Could you please share with us the link for the sandpaper app?

@paulkolodner2445

6 жыл бұрын

And how about a file management app, too.

@troyna77

5 жыл бұрын

Those apps are too "rough" to download/install.

@Hellsong89

4 жыл бұрын

@@troyna77 True and wear out the fiber lines and antennas of 4G, so service providers do hate the app.

Can't wait for Diresta's part, been a fan of him for a long time and nice to see that he's collabing with one of my other favourites :D

Another great video. Can't wait for Jimmy's.

Got me laughing like a drain, as always.

@noahbaumeister5925

5 жыл бұрын

McAtheist "laughing like a drain?"

Tony, could ya post a link for that phone app. Running to the store for just the right grit is getting old. Dude you are a hoot! loved it.

That was all kinds of fun to watch!

One of your best videos Tony! Well done!

You might've already considered this, but I'd drill a hole somewhere (maybe through the top of the shuttle) to vent that spring chamber. If the leak rate at the bottom oring is higher than the middle oring, pressure will eventually build up in the spring chamber and give you the effect you mentioned initially with the two oring design. It really doesn't make much of difference since you'll notice it right away and can just replace the seal, but coming from a paintball gun design background, that sealed spring chamber doesn't sit quite right with me.

@ThisOldTony

6 жыл бұрын

good idea tyronejk, thanks!

Very cool vid, bro

Thanks for another awesome video Tony!!

You crack me up. Thanks for another great video.

15:10 i was not expecting that He made me choke on my water

Neat! I bet the x error in the CNC routering was due to a variation in the length of the stock, that'd be easy to slip by. Maybe your scissors need sharpening?

Exactly why you're my favorite KZreadr...not sure if it's the aluminum cutting scissors, the cell phone sandpaper, the caliper zoom (combined with your impressive design/machining skills) - your videos are pure awesomeness. I learn something from each one. THANKS!

Tony I love your humor and your knowledge .

Should have left the "Farthead" on the final part.

@Farlig69

6 жыл бұрын

Agreed!!!

@mikhail9607

5 жыл бұрын

It’s pronounced far-THEED

Great work! Shouldn't there be a venting hole below the valve? Now any leakage through the lower o-ring can still build up pressure below the valve.

@tylergarza6632

6 жыл бұрын

yes but if there is leakage in the lower o-ring what's to say the middle and upper o-rings don't leak as well? just trust the o-ring.

@AndrewBrowner

6 жыл бұрын

bump this for the final design

@MaximilianonMars

5 жыл бұрын

@@tylergarza6632 good policy in general, should be on a bumper sticker 😱

Pure genius and very skilled craftsmanship.

@ThisOldTony

6 жыл бұрын

Thanks RSW!

Man, I am constantly impressed at your talent. Not just your crafting skills, but the unique sense of humor and comedic timing you are able to imbue in to your videos. They make for a perfect video.

@ThisOldTony

6 жыл бұрын

Thanks Jose, glad you like them!

Much nicer than mine (sorry harbor freight)

@darfjono

6 жыл бұрын

hazard fraught

@red00eye

6 жыл бұрын

Get AVE in on a threesome, b like the frickin Avengers. But old and in their garage with a mill. And beer.

@MaximilianonMars

5 жыл бұрын

@@red00eye they could probably put together some fancy gadgets that would make Stark blush 😳

did you get those clippers from Ichban Moto ?

@brh4015

6 жыл бұрын

Clippers? That is a diamond shear.

@troyam6607

6 жыл бұрын

COLAB! with ichybum!

Absolutely brilliant TOT. Its videos like this that made me become an engineer

As always, excellent!

15:10 Laughed out loud

The sandpaper app is sure legit, I use it all day. But that file, come on TOT, that is fake as a 3 bucks bill

@ThisOldTony

6 жыл бұрын

Should've stopped while I was ahead?

@fellipec

6 жыл бұрын

We all know the file app is exclusive for Samsung Edge

Jimmy wanted it done right so he came to the right man. Great edit, hilarious of course, and a beautiful end product Tony. Thank you.

OMG, the sand-phone just about knocked me over laughing. Amazing production values, as always 👍

This is great, I fell asleep at the exact moment he started and woke up to a close up of it spinning around slowly.

oh my!! i lost it when he tested it and shot back!!! great job!!!

How amazing!

Love your sandpaper, great editing and machining. You are an amazing maker!

Thanks for making!

Dang Tony, your delivery, sense of humor and overall content make your videos such a pleasure to watch. Thank you for taking your time to produce these videos. When you called Jimmy a "kid" I almost lost it from laughing then realized y'all got it like that. It's awesome to see the comradery .

Best video I've watched this month. And I watch a lot of videos. Great job!

I was a bit late to the ToT party but I was instantly addicted. To feed this addiction I started watching the older vids and just have to say the progression in production quality in your vids is amazing. All the while staying true to your original humor and style. Bravo!

Always enjoy your videos and the laughs you throw in. Still my favorite KZread channel. Thank you for sharing. G W

lol.. i flinched a bit when you finished it up and did the "kick back" gag.. Love these vids :D

Epic! Thanks for sharing. And the phone app was hilarious! :D Really looking forward for the detailed CAD video!

That's cool as heck, who wouldn't want one of those!

I want one!! Thanks for the great videos. Your humor is spot on!

You are a ridiculously talented individual. Keep up the awesome work!

I love your work and humour. Great work.

Loved the phone sanding part, litrerally rolling on the floor laughing, brilliant! Just brilliant.

This is awesome, its so rare to find this kind of videos where the project progress from conceptual design to working prototype. I'll sure be watching the follow up video.

Tony and Jimmy. My day is complete!

That is absolutely beautiful handiwork.

This is glorious.

I love it. I like the tool marks too.

Just started watching your channel and now subscribed. You have a gift! You have the ability to give great instruction AND with a great sense of humor! I watch about 2 dozen machinist/build channels on KZread and I think you do the best graphics and clear camera work out there. Thanks for sharing!

Best design I've ever seen awesome job.

Dude, that is an awesome product. And i love all the funny little touches you add to the videos! keep it up!