Highly recommend!!! Bought this when they first came out with the ceramic, i was amazed!!! 😮‍💨🙌🏼

FACTS! I used the Adams 5 year Graphene coating to my car over a year ago and it's still going strong. I use the Graphene shampoo and detail spray. It's really the best real world coating and so easy to apply.

Just applied this to a non dealer prepped escalade last night and it was my first time using adams graphene and I was pleasantly surprised how easy it was to work with

One pro tip if you're really ocd or just very unsure about your ability to consistently cover all the needed areas, you can get some white banner paper and tape it up underneath your windshield and that will allow more light to actually reflect back to you and see the UV tracer a bit on the windows. It's not as good as a completely opaque surface but it's something that helps.

Much better video on how to use this product. Great job! I can't explain why people are only getting 7-months from this product. I myself, live in Arizona where it is 120 degrees all summer long, my 2006 Dodge Ram 1500 has never been garaged and sits outside in the baking sun all day long. I used/installed this coating well over a year ago and it's still performing the same as the day I installed it (only 1-coat). PREP-WORK is the key to any brand(s) coatings life. Any and all coating MUST be maintained (just a fact), also the least amount you touch the paint/coating the longer it'll last. Here's a huge tip: STOP USING that insane 2-bucket wash method (it does sell more buckets and grit guards, but it doesn't work as well as you think it does or it's advertised) and instead use 1-clean-soapy-wash-bucket (if you can't do a touchless wash) and use multiple wash mitts and NEVER return them back into the clean soap bucket, that way your wash buck never sees 1 speck of dirt. Period. I use 8 to 10 double sided wash mitts (soaking in wash bucket) only when I need to do a contact wash. Divide the car/truck into sections for each 2-sided mitt to wash and wash the lower part of vehicle last. Follow up with a graphene or ceramic detail spray 1 or 2 times a month. If I get 5-years from this coating (with the heat I'm in) I'll be happy. Again, THE PREP-WORK IS THE KEY TO LONGEVITY for any wax, sealant, or coating. The bottom-line is, if you don't want to put the time and effort into it, don't coat your vehicle! Buy this kit and their Graphene Detail Sray together. Their Graphene Shampoo... Not so much or I won't buy that yet. I've requested they use this product on an uncoated car to demonstrate how good it performs or leaves protection...I'm still waiting. Their video of the Graphene Shampoo shows the shampoo used on a coated car; this only shows me the coating is still working. Now for the direct question: Does Adam's Polishes (or their manufacture) back or have a warranty on this coating?

@beamisLittt

2 жыл бұрын

I don't understand the other comments either. I'm actually going on 9 months with the original graphene coating and it's still performing like day 1. Strip wash, iron decon, clayed, 1 step polish with Sonax PF, paint prepped and coated. Then applied the Graphene Spray Coating as a sacrificial topper. Since then I've been washing it weekly/bi-weekly with either Reset/Graphene Shampoo/Uber rinseless, then either GDS or GCS3 as a drying aide/topper, and iron decon every few months. Maintenance is still key with coatings! And I use the 1 bucket method as well! It saves time and is definitely safer than the 2BM.

@still-DJ

2 жыл бұрын

​@@beamisLittt Yes! Most don't do the heavy lifting prep work. I've also used Auto Fanatic products to help me with the touchless washes. If you can dry with a leaf blower that's even better. Remember the less you touch the paint, the less chance of scratches and swirls. Also when I must do a contact wash, I only wash in the same direction as the wind would flow over the vehicle, same with drying except for windows. Keep up the great job you're doing. If you don't really see much iron... dilute your decon chemical down a bit or use less often. If you're seeing a lot of brake dust kickup, on your next pad swap try the Wagner ThermoQuiet (TQ) brake pads. That's what the Corvette guys are running to keep their wheels a lot cleaner. Take care man.

@beamisLittt

2 жыл бұрын

@@still-DJ Yup I have an Air Cannon Jr. and a Sidekick Blaster as well so I normally blow off about 90% of the water and the remaining would be rid of after a topper. Thanks for the tip on diluting the iron remover! My car doesn't get much iron contamination at all but it still seems to help revive the coating back to its original state in areas that start to sheet. Happy detailing and take care!

@sammitchell7310

2 жыл бұрын

I had a professional do my prep work but continue

@still-DJ

2 жыл бұрын

@@sammitchell7310 "... but continue" what Sam? and how long did that prep work take?

You make this look easy my guy. I’ll say it’s trail abs error for me. But nothing beats this product. I ordered a test box , now I have hundreds of dollars of Adams polishes.

Just applied this to a new PPF, Could not be any easer to apply !! Love it !!

@AdamsPolishes

Жыл бұрын

Awesome! Thank you for the kinds words and thank you for your business!

Have used this religiously and now I use the advanced coating the same. Love both gents. You do great work!

I did Adam's graphine ceramic coating my 2005 911 last week.

Hello nice video! Can i get wipe off the ceramic with a normal microfiber towel?

Just coated my new Tesla 3! Perfect result! Thank you!

@AdamsPolishes

Жыл бұрын

"Perfect result" is what we like to here! Thank you for your business

How does this Graphene ceramic product compare to your other ceramic products? I have your other ceramic coating, surface prep and paint sealer products on my Lexus is300. I always get compliments on how nice the car looks. Once a month I hit my car with your Ceramic Boost product to enhance the shine. I also spray your Detail Spray on the wet car after washing it and before drying it off. Does the Graphene hold the shine for a much longer time than the other ceramic coating products you sell?

If I use the microfiber cloth to removed residue, will this hurt? And does the uv tracer effect fade with time. I could see it plainly at first, then couple days later it's gone or lighter looking.

Is it possible to do sections of your car. By the time I would have step one done the whole day is gone. I am wondering if I could do the front half one weekend and the rear half the next weekend?

I think I need this for my business.

About to try it out

If your paint looks good do you have to use compound and polish??? Can I just do the clay mitt and then panel prep before applying the graphene

Maybe a dumb question because but I'm new to the ceramic coatings. But, can you add spray wax coats on top of the ceramic coating? Also can you add more layers of the ceramic coating every year or does it not need either? I live in an area where the State covers the roads with salt in the winter and I do a lot of surf fishing and I have hard water at my house. That being said, I typically wax my vehicle over 5 times a year to keep the water spots off the vehicles and protected from salt. I know it may sound dumb but I'm new the ceramic coatings and all and the vehicle detailers I know don't use them just need some insight and direction please.

I bought the kit which cost me 120$ and it’s the 10 year graphene and it comes with the surface prep a bunch of white towels etc. Since you have a video I don’t need to ask how to use it. My kit comes with a purple light. I don’t have a garage so what weather should I wait for b4 putting mine on? I bought mine last year it’s still in the box is their a expiration date on the graphene ceramic. Also I don’t see u using the purple light what’s the light for??

Hii. Do we need the full 3 prep steps for a brand new car? Thanks!

Thanks for the tip to apply this in sections. You failed to mention that after you stop you need all new microfiber towels. Now I’m screwed until I get more.

Lots of cuts in the edit, that suede towel must be dragging like crazy. I have this on my Supra for over a year now and its been good. Still holding up good on some areas and decent on others. The car sits outside and see's small amounts of rain driving. Just ordered the advanced version since I plan on doing a small paint correction. Should be fun.

My apologies if this was asked earlier; can the applicator pad and microfiber towel be washed in washing machine for reuse?

Excellent tutorial, but you didn't address how or when to use the ceramic boost, and how low can the temperature be when you apply it of during the curing phase ( the first 24 hours)

I recently did my new vehicle with your spray on graphene coating and love it, I ordered this kit and want to step up to longer lasting protection, my question is can I apply the stronger coating over the coating I just applied or should I wait awhile? Thanks for any advice, terrific channel, helpful tips.

@dakotasimon3445

Жыл бұрын

You will need to remove the other spray coating and then add the stronger version

@Avery-1

11 ай бұрын

I would definitely remove the first one you did

What polish is best to use to prep for graphene ceramic coating?

What about for the interior? Leather seats with ventilation holes?

How many times do you have to change the microfiber on this?

You made it look easy to apply:) After watching this video few times tried the Graphene (not the advanced) on my Black BMW. It has streaks of high spot. Even after going back and trying to put a little more and wiping immediately, does not seem to work. Now I have high spot streaks in lot of places. The customer support says, you can wipe again and you have time till 30 days. Already did twice and no luck. Waiting for a reply from Adam's to respond to the photo on how to fix it. I hope I dont have to polish again all the trouble panels:(

@Odej3429

2 жыл бұрын

You can wipe it off w compound on micofiber towel. Easier than using rotary

Idk about 7 years but through rough Ohio summer and winters I got about 5 so people must be doing something wrong not to get time out of this product. Applying to my new car today, but should probably reapply to the old cars too

Maybe get one of those UV lights on one of the headband headlamps you can wear.

Can you apply these products to PPF?

Is it ok if it rains on the car a couple of days after applying?

Do I need a different kit if my car is half ppf?

How long should i wait before expose to any rainy day?

So if I got the spray on version and decide to apply the 7 year version. I can simply just apply that any time correct? Also the rag to buff out the application and applicator pad, can they be reused?

@dakotasimon3445

Жыл бұрын

No. You should do the 7 year version first. If you use the spray version first, then the 7 year glass bottle version won’t be able to adhere directly to the clear coat.

I don't have a garage. Can I apply this outdoors?

II did clay bar, polishing compound, and a premium wax. Can I do the graphene ceramic coating on top of that?

@AdamsPolishes

Жыл бұрын

Hi Mark, for best results, the Graphene Ceramic Coating should be applied to the bare polished paint. If you apply it onto a wax, it will only bond to the wax layer, so durability could be greatly reduced to possibly only a few months rather than years. We would recommend using our white Polish and a White Foam Pad to remove the wax layer, then Surface Prep to remove all polishing oils to leave a bare finish, then apply the Graphene Ceramic Coating.

What do you do if it's a brand new vehicle?

Do you have to use the swede towels to remove or can I use regular microfiber towel

@AdamsPolishes

Жыл бұрын

Hey Brian, you can definitely use the microfiber towels to remove. For best results we recommend doing an initial wipe with the Micro-Suede Towel first to break down the cured surface oils of the coating and then a second finishing wipe with the Plush Microfiber Towel to level it off and make it perfect on the surface.

Excellent, informative video -- although the music is REALLY annoying! Thanks for taking the time to go more in-depth on the application process of this specific ceramic coating.

@AntLive29

Жыл бұрын

I agree about the music.

What happens if you forgot to wipe as you’re applying the coating?

When costing the barrel of the wheel does it allow the weights to stick well? It’s making a, “non stick” layer. Never did barrels for the fear of that.

@AdamsPolishes

Жыл бұрын

Hi there, indeed graphene ceramic coating the inner barrels of wheels can make the wheel weights adhesion much weaker. If you buy a new set of tires or wheels, we recommend having the tires mounted and balanced first, then apply the coating. Or if you are replacing tires, you can machine polish the inner barrel to remove the ceramic coating, then reapply afterward. Another option is to let your tire installer know, and they might be able to dull just that small area with an abrasive cutting compound, alcohol prep, etc to make the adhesive on the wheel weight stick better.

How many applicators do you need for that size truck? How many times did you swap sides on the applicator?

@AntLive29

Жыл бұрын

The suede gets saturated quick. I used 4 on my Cadillac Escalade

You mentioned doing the vehicle in sections each day. Doesn’t the applicator become unusable if set aside for another day? The kit comes with 2 applicators. What if you want to do it over 4 days?

@AdamsPolishes

Жыл бұрын

Yes the applicator can harden over the course of a day or two. You can use opposite sides of one applicator to get 2 uses out of one applicator, and we do sell additional applicators as well if you want to coat the vehicle over time 👍

What happens if I wipe the coating too early instead of waiting for the rainbowing? Would it still be fine?

@bwilliam4023

2 жыл бұрын

you get weak or zero protection

Can the graphene ceramic coating be used on a soft top convertible? …or is it best to use the spray? …or not ceramic coat a soft top?

@Apophis-en9pi

Жыл бұрын

I wouldn't on a soft top. I use Adams Graphene Ceramic Advanced on my S2K and then 303 fabric cleaner and fabric sealant.

I'm detailing my silverado soon. Clay , iron remover ,paint correction. My truck doesn't fit in my garage. So is OK if I use this product and then park my truck outside or carport until is cured? Any tips? Thank you

@nicolosi11480

2 жыл бұрын

I’m waiting on this answer too, so I’m subbing to this comment/ question….. @adamspolishes ?

@Captain_Kdawg

Жыл бұрын

I’m curious I just applied it to my sierra . The one bottle did not finish the whole truck. Did you run out of the 60ml bottle too?

Can I still spray on a quick wax or detail spray after future washes ?

@AdamsPolishes

Жыл бұрын

Hi there! You can use our regular pink Detail Spray no problem since it is a polymer spray, but we would recommend against using wax products since they are different chemistries than the Graphene Ceramic Coating. Wax will not hurt the coating, but could detract from the hydrophobic behavior of the coating layer. Our Graphene Detail Spray would enhance the coating even further and be a better option than a quick wax or detail spray.

what about iron decon

For how long can you use an opened bottle of ceramic coating?

@Apophis-en9pi

Жыл бұрын

I believe they say 6 months.

What is the shelf life of this product after I use it? I used half a bottle on one car then months later use the other half on another car and it was easy to remove even after it sat overnight

@Apophis-en9pi

Жыл бұрын

I believe they state 6 months.

you apply it to the windscreen also. so is safe for viper blades? I mean in rainy times will the viper blade make any noise?

@AdamsPolishes

Жыл бұрын

Hi there, we would recommend giving the wiper blades a good cleaning with our Tire & Rubber Cleaner and an Edgeless Utility Towel, then you can apply the Graphene Ceramic Coating to the rubber wiper blade as well to help them glide better on the windshield without chattering. If the wiper blades are several years old, you may experience some chatter, usually indicating that they are either dirty or need to be replaced. Big temperature differences between the windshield and wiper blades could also contribute to some chatter.

That alcohol prep bottle is super small. What happens if i run out during this process? Can i mix up my own product or….?

@AdamsPolishes

2 жыл бұрын

The 4oz bottle of Surface Prep included in the kit is typically enough to prep 2 vehicles or more, about 1-2oz per vehicle. We do offer it in larger 12oz bottles on our website as well!

I saw on box that it should have a 24 hour cure time. Can I wash the car after that or should I wait a week?

@dakotasimon3445

Жыл бұрын

Wait at least a week to wash. 2 if you can

Could you add the Graphene Detail Spray after coating to prevent water spots?

@hartlanddetailer5670

2 жыл бұрын

I'm guessing, since this product is graphene/ceramic, it should not water spot? But I would wait 24 hours at coating then apply a spray coating....

@AdamsPolishes

2 жыл бұрын

Hi Steven, our Graphene Detail Spray is a perfect companion product for our coatings. We recommend using it on a clean surface every 3-4 washes or 1-2 months, whichever comes first, as maintenance to keep the coating performing its best. Coatings unfortunately will not completely prevent water spots, but they will reduce water spots and make them much easier to clean up afterward, since the coating level is attempting to keep the water spot from etching into the vehicle's painted clear coat.

@SS95170

2 жыл бұрын

@@AdamsPolishes perfect thanks for the reply and keep the videos coming. They're really handy.

I just bought a new car, and bought the graphene advanced kit. pray to the gods I don’t mess on this 😂😂

Can this product be used on boat gel coat??

@AdamsPolishes

Жыл бұрын

Hi Neil, yes you can use our Graphene Ceramic Coatings on boat gel coats too. Just make sure you make the surface as nice as possible first by claying, machine compounding and polishing, and Surface Prep first, just as you would on a car.

Surface prep, same as the detail spray?

@AdamsPolishes

Жыл бұрын

Hey AVP, no they're actually two very different products. Surface Prep is a final wipe-down spray with alcohol and other surfactants to remove any remaining polishing oils and leave the surface completely bare to apply the Graphene Ceramic Coating. Detail Spray should not be used before you apply the coating, since it has polymers and a slight bit of protection - so it would not allow the Graphene Ceramic Coating to bond to the clear coat to its full potential.

Do you have a rep in the uk?

@AdamsPolishes

2 жыл бұрын

Hi Alexis, we do! Look up Prestige Car Care Shop. We also offer international shipping as well.

14:38 what are all those little sparkly specks on the finish that doesn't look good.

@AntLive29

Жыл бұрын

Rock chips

Super annoying music. Bought the kit and this was helpful to watch someone do the work.

If one were to layer the coating, how long would should you wait to apply the second layer?

@AdamsPolishes

2 жыл бұрын

Hi Mike, one layer of our Graphene Ceramic Coating is sufficient, but if you were to apply a second layer, after you have finished application of the first layer, wait 1-2 hours before applying the second layer, then allow the vehicle to have the full recommended cure time.

How many coats of graphene coating are needed to last a minimum 5 years?

@AdamsPolishes

Жыл бұрын

One coat is sufficient. A second coat can be applied, but it is the law of diminishing returns. The second coat will just ensure more even coverage. More than 2 coats is not necessary or recommended. How long the coating lasts will more depend on driving conditions and maintenance after application 👍

Can this be applied to PPF?

@jkd6192

2 жыл бұрын

Yes you can …I just got off the phone with them

is just 1 towel needed to wipe off coating on entire vehicle?

@dakotasimon3445

Жыл бұрын

Absolutely not lol. You’re going to need to use multiple towels. The more, the better, really. You will see fresh towels wipe down and get the final buff easier. Also throw away all the wipe off towels after use as they are no longer good.

Can Adam's wheel ceramic coating be used on the painted surfaces of the body as well?

How soon can I wash after I apply?

@AdamsPolishes

Жыл бұрын

The graphene ceramic coating can be exposed to water after 24 hours of curing, but we recommend waiting 5-7 days before washing with soap and water to allow it to fully cure.

@vpsfowler

Жыл бұрын

@@AdamsPolishes thank you for replying. That’s one reason why I buy your products. Great customer service! Plus great products

Public service announcement 📣 if your thinking about getting this for a full size 4 door pick up truck. This one bottle will not do the whole truck. I just applied it to mine and ran out. It done every thing other than the. Rims,back glass, rooftop, one side mirror, and one step rail. Luckily i purchased the spray coating as a back up. As a just in case and glad I did. Although it’s not the 7 year coating. But atleast something will be on them panels I did not have enough to finish.

@AdamsPolishes

Жыл бұрын

Hi there! One 60ml bottle of our coating should be plenty to do a full size 4 door truck - paint, glass, and wheels - so it sounds like you may have poured a bit too much on the applicator for each follow-up panel. You'll want to load up the applicator somewhat heavy at first since it is dry, but once you have some coating in the applicator, you can use less on additional panels. I'll usually have about 1/3 of a bottle left after coating a full size truck.

@Captain_Kdawg

Жыл бұрын

@@AdamsPolishes and I may have. And may overlapped every section a few inches. Just to make sure I didn’t miss any thing.

Drop the music after the intro. It's unnecessary and distracting. Other than that, great video and info!

Is one suede cloth enough to remove excess coating on the entire car?

@AdamsPolishes

Жыл бұрын

Depends on the size of the vehicle. We recommend to use the suede towel only to feather the coating and level it, then wipe with the plush towel to remove all of the residue. That is why we include 2 of each towel in the kit.

@fecss

Жыл бұрын

@@AdamsPolishes I just bough the advance graphene, will the one suede and 1 towel be enough for a normal sedan or should i plan more

@fecss

Жыл бұрын

Bmw 3 series

@AdamsPolishes

Жыл бұрын

@@fecss one suede towel will usually be enough to lightly feather the coating and level it out, but I like to have at least 2 borderless grey or 2 single soft towels for wiping away the residue. 1 plush towel might be enough, but it will depend on how thick you apply it, and how well you fold the towel for wiping the residue. If you fold the towel into fourths, that will give you 8 working sides on that towel to hopefully get through the whole sedan, but as the towel absorbs more and more residue, you will see that it can smear the coating around and leave high spots. That is where the second clean plush towel will come in. Many detailers will do a 3-towel method for removing coatings - suede to barely feather and level the coating, one plush to wipe away the residue, and a second plush towel to do a final wipe on the panel.

I still hate the hours to polish to prepare for coating

Never thought to clay the windows also.

@AdamsPolishes

2 жыл бұрын

Absolutely. Glass can develop bonded contamination just as paint does!

Why not make a New Video!?

Is this a reupload

@mbui7182

2 жыл бұрын

yes

After two years in a Canadian winter/climate the product has stopped working. Very disappointing, always washed every 2-3wks with the Graphene soap. Did all the required steps before

My use of this product ended up with an excellent looking vehicle. However, avoiding high spots was almost impossible. So, not the most user friendly product.

@still-DJ

2 жыл бұрын

I had that issue on my first fender then I quickly change plans and applied the coating to a smaller area. Thankfully, that resolved my issue right away because I didn't want to fight a coating.

@AdamsPolishes

2 жыл бұрын

Hi Marc, we do apologize about the issues. High spots can be tricky and can be caused by a few different factors. Temperature and humidity in your garage play a big role. High humidity levels will typically cause the coating to flash and become tacky much more quickly than low humidity, so you have a shorter time period before you need to remove the residue. Lifting the applicator on and off of the surface while applying can also lead to high spots, since a heavier concentration of coating will touch the surface each time you lift it off of the vehicle and place it back down, so we recommend trying to apply to a section or panel in one smooth motion, without lifting the applicator. How you wipe with the towels can also potentially leave high spots. If you are pressing down into the towel with your fingers, that creates uneven pressure points on the surface that could leave smears or streaks, so it is better to wipe with the towel using your palm or side of your hand for more consistency. Using multiple towels is also recommended, since they will build up more and more coating residue as you move onto new sections of the vehicle. Wipe the panel first with the Suede Microfiber Towel included in the kit, then wipe it a second time very thoroughly with one of the Single Soft Towels. Hopefully these tips will help out with the next vehicle you may apply our Graphene Ceramic Coating. The more vehicles you coat, the more intuitive it will become!

@marcg1964

2 жыл бұрын

@@AdamsPolishes I really appreciate the reply. I did learn as I went along and high spots became less and less of an issue. The problem for a DIYer like me is that I will not have the need to coat another car for a while. So, I must re-learn what I learned before. Regardless, I think I should have started with a more forgiving coating, like your Ceramic or one from another company. However, I needed the latest and greatest, so chose this graphene coating....actually the ADVANCED one. Again, I appreciate the reply. I love some of your other soap and detailer products.

Why didn't you use a Iron Remover?

@AdamsPolishes

2 жыл бұрын

Hi Moises, using an Iron Remover is certainly a good option to do even heavier decontamination of a vehicle, before preparing to machine compound and polish the surface. This is especially important on lighter-colored vehicles like silver, white, light gray, and so on, since the iron particles stand out as very small orange "dots" in the paint. Claying and then compounding can remove these deposits in some instances, but we do offer Adam's Iron Remover on our website to remove iron contamination faster and easier!

@moisesperez3693

2 жыл бұрын

@@AdamsPolishes thanks for replying

👍🏼👍🏼👍🏼🌹👍🏼🙌🏼🤝

Must do all these steps first let people know

That little bottle coats that whole car?

@AdamsPolishes

Жыл бұрын

Hi Willy, yep the 60ml bottle will usually coat 2 small vehicles, or one full-size truck no problem, including paint, glass, wheels, lights, etc.

Even with proper prep and installation does not last

Did I just watch a video where some guy pulled his aluminum wheels off and ceramic coated the inside barrel of said wheels? How ludicrous is that? I have owned cars for 40+ years and have never seen or even heard of anyone washing the inside of a wheel, much less ceramic coating it.

why is the motor manufacturer not doing that in all cars?!

@MiataPower96

Жыл бұрын

Two separate businesses. The auto manufacturer just wants to make the sale on the car and that’s it really. The detailer on the other have takes care of it from that point and keeps your car looking nicer for longer.

Nanoskin 9h ceramic coating is superior to this product coming how can that be high quality in a plastic bottle !! My stuff comes only in glass

*7 months, not 7 years.. Love Adams, but this does not last as advertised.

@milinichsautodetail3124

2 жыл бұрын

No it does not that’s a fact

@sammitchell7310

2 жыл бұрын

Even with proper care the bottle not spray lasts a couple months at best. Bad way to spend $90

@MrAbword

2 жыл бұрын

@@sammitchell7310 very bad way.

@dannyhernandez9113

2 жыл бұрын

Did you do any prep? I used the ceramic spray coating on my uncles car almost a year ago and it still has about 80% left. I also did my moms car with no paint prep with the 60ml coating and has been holding up for months

@MrAbword

2 жыл бұрын

@@dannyhernandez9113 yeah full decon, iron remover, clay, 1 step correction, ipa wipe. Unfortunately I did three vehicles with it and all results have been the same

Very let down with this stuff love most of your products this is not one of them left streaks everywhere and it's terrible to level out. Just not smart for s black car and stop saying 7 years it's 75 percent of what you list max so 5.25 years but more like 4

Pls pls pls no more background noise that sounds like a mario brothers video game. The wrong background music distracts from the video, not makes it more professional.

This won’t last 7 years your lucky to get 7 months. Adams makes great products but they simply can’t nail it on their coatings for some reason. There is far better options out there. Go back to the drawing board and revamp the coatings even if it takes a year or so to develop something worth while

@AntLive29

Жыл бұрын

That’s simply not true

@milinichsautodetail3124

Жыл бұрын

@@AntLive29 yea it simply is

@Looking4TravelingWelderJob

Жыл бұрын

Bs their 18+ month spray lasts over a year with a car sitting outdoors 365 a year 50k miles a year. With only using their graphene shampoo. So I'm sure this kind lasts longer

@NicShadowjensen

Жыл бұрын

I got 3 out of mine

@monteambarchyan8111

Жыл бұрын

I’m at 2 years on this coating with proper maintenance and the coating is just as strong