I've seen speakers like these and they're not really tall enough for you to actually dj a dancing set with... These are honestly better suited for something like a outside wedding ceremony Or just like you mentioned a solo artist playing in a small Cafe or something.

Thank you for the descriptive video. No cheap carrying bag for the line array columns on this one? Am considering this as a back-up to my Gemini 300BT - would be used in a house of worship (2 1/2 foot high stage) medium (quieter venue) - 200 people max - with an external mixer for more input (like the Gemini). 2 singers and a keyboard.

I love the way how the sound I have I was watching you on my smart TV and I have it sound bar I was like I still own my passive systems but I’m going to buy on my 4 of those party 10 I’m a big dj for logre event

Hey buddy, thanks so much for this review. I really appreciate all the time and detail you put into explaining everything. I know I was bugging you about the 3200’s, but now I’m thinking about two of these instead, which of course means more questions. Thanks for your help! 1. Can I pair them with the XLR out and in or does it have to be RCA out? I asked this question on Amazon and that is what someone told me-that it has to be RCA. 2. My TV has an optical out, so I was going to get a DAC box and go stereo RCA into one of the units. I have a Blu Ray player, but if that is connected to the TV with HDMI then that audio would come out with the optical out. 3. So if I can pair the two units with XLR, then I should still be good to hook up a 3rd sub with one of the outs, right? Or do you think a third sub is too much for a home theater setup? Thanks again for your time! I appreciate you!

In your opinion, which do you recommend more for a wedding ceremony system, with music and mics being used, the Proreck Party 10 or the Sonart 2 speaker set up you reviewed in another video?

@TheMCAndreB

3 жыл бұрын

Hello?

@DjMartiniMidwest

2 жыл бұрын

Hello , the party 10 is a much better set up than the sonart system. In my opinion. The ProReck is overall better for both. Thanks

I'm following your channel but I'm not a DJ. I have an acoustic guitar duo that I'm in need of a portable sound system for 1-200 person venues. I've found that the cheaper systems don't have the column speakers angled in all directions for maximum dispersion like the Bose L1 or other comparable systems. Even though your using your rigs for DJ'ing I'm hoping you'll help me with a few questions. 1) Do you notice the "dispersion" concern with the Proreck and other systems that you've tested? 2) I have a 3D printer and have been considering printing speaker mounts that would angle the 4 column speakers so that they better spread the high frequencies. Is there any room under the grill of the column speakers so that I could angle the speakers using new mounting plates? 3) Of the systems that you've reviewed, which system would you recommend for an acoustic duo? Thanks so much!

Does adding an extra sub thru it's xlr work and does it make the sound bette? or the built in sub is sufficient enough? thanks

How is the treble? Someone on Amazon said he changed out a couple of tweeters because the high end was lacking. I just ordered one of these based on your review. I intend to use it for my electronic Roland drums and my home studio with different instruments. Thank you for the review.

@brentclark4204

3 жыл бұрын

@@DjMartiniMidwest thanks!!

Sorry MWR that I wasn’t more clear. I was referring to two of the Party 10s, not the 3200’s. How would that change the connections you mentioned? So two Party 10s and an additional sub linked together from my TV. Thanks so much!! And yes, if there’s a link I can use to help out the channel I will! There was only one 3200 sub in stock last time I checked, so is there another sub I should get in case it’s sold out before I have a chance to buy?

@RAKAttack0409

3 жыл бұрын

@@DjMartiniMidwest sorry having a brain fog-to go to sub do I need XLR male or XLR female to RCA? Found a powered sub I like with RCA in, just need to know which gender to buy. Thanks again!!!

Hi, I’m on the fence between the party 10 and the Proreck 2000. Will be playing acoustic solo gigs in small to medium venues. Thanks for your input

@DjMartiniMidwest

19 күн бұрын

ProReck 2000 is a far better system then the party 10. I recommend the ProReck 2000 or Party 10 . It’s a more powerful , durable, and versatile professional speaker system. Thanks

@michelewade5415

18 күн бұрын

@@DjMartiniMidwest ok, thanks for your reply. I’m getting the Proreck 2000. I think it’ll work for the small rooms and I can always add a powered speaker or sub for mid size rooms or outside gigs. Plus didn’t really want to spend over a $1000 for slightly better features. Couldn’t justify it. Thanks, love your channel.

Any thoughts on it being good for vocal (singing) reproduction, karaoke?

Thank you so much for the review bro You are the very best you are the cat You got nine

@DjMartiniMidwest

Жыл бұрын

Thanks for watching and your feedback.

Do you know the horizontal dispersion of these? For a live performer or small band does this column work as both main and monitor the way Bose claims theirs does?

@DjMartiniMidwest

11 ай бұрын

Hello, thanks for the watch and the question. So the Bose is a far better sounding speaker and does claim a 180 degree dispersion . My Thoughts regarding party 10…Although my opinion is the ProReck 2000 is a big improvement over the party 10 and I Would recommend it as a starting/inexpensive options as you can purchase 4 speakers for the price of one Bose L1 Pro8 . The Party 10 looks nice and has cool design but the ProReck 2000 is a better speaker in all ways except for looks depending who you ask? Both ProReck systems have front facing full range speakers and a subwoofer. If you can afford a top shelf item like Bose it’s great . But the ProReck works at value and has show reliable for me. Thanks. Links to compare #Amazon Affiliate ProReck 2000 amzn.to/3DxEvje Bose L1 pro8 amzn.to/3QeIatO Party 10 amzn.to/450ohef

I've seen speakers like these and they're not really tall enough for you to actually dj a dancing set with... These are honestly better suited for something like a outside wedding ceremony.

@DjMartiniMidwest

Ай бұрын

Thanks for watching and sharing. I agree… ProReck has released better systems suited for wedding and mobile gigs . The Party’s are lacking in a few areas for volume & sound .. compared to newer systems like the ProReck 2000. Thanks.

Hey Martini, thanks again for this review. I'm a guitarist/ vocalist. I've noticed that my guitar (quarter inch chord) is getting significantly more amplification than my mic (XLR) What am I doing wrong??

@hapakope8972

2 жыл бұрын

This is with the proreck party 10 obvs.

@hapakope8972

2 жыл бұрын

I've also tried multiple mic's

@DjMartiniMidwest

2 жыл бұрын

My only suggestion would be trying a few different cables as well. I have had issues with low signal with cables before. But I’m guessing if not the unit might have issues . Might have to contact ProReck see what they suggest as well. I also would Suggest using the 1/4 inputs for ( mic&guitar ) Not the XLR input. XLR / RCA input Might have signal processing or codec on that channel. I don’t have that speaker anymore or I would check it out more for you . Just thoughts…Thanks.

@hapakope8972

2 жыл бұрын

@@DjMartiniMidwest Right on my man! I'll definitely try this out. I didn't note above that I'm plugging straight into the unit, was wondering if going through a sound board would possibly make this better. I appreciate the response! And will share your content with the other budget musicians in my sphere of influence. 👍🏾

@DjMartiniMidwest

2 жыл бұрын

@@hapakope8972 A sound board or mixer might help with issue not 💯 but worth a test for sure . Thanks again.. Much appreciated on the shout out to others and shares!

Good day Sir. I would like to ask if it good for an acoustic guitar and vocals together?

@hapakope8972

2 жыл бұрын

I have this system and can answer this question. Yes, but you'll need a sound board. The high ends are a bit lacking, I'd suggest purchasing a titanium bullet tweeter and install that. With those 2 things, this is a SOLID PA system. Well worth the money, comparable, if not better than similar "High End" systems.

Been hearing users are replacing 1 of the 4 top tweeters with a Pyramid TW44 for optimal treble.

@DjMartiniMidwest

2 жыл бұрын

Sounds like a good idea. Thanks for watching and the tip.

@hapakope8972

2 жыл бұрын

Been seeing that as well. I'll be doing that with mine.

@hapakope8972

2 жыл бұрын

Did it! Haven't let it rip yet, but a quick night time demo it is clearly more crispy.

@RedEyeC

2 жыл бұрын

@@hapakope8972 - thanks for informing - keep us posted on the difference at a gig ;)

@hapakope8972

2 жыл бұрын

@@RedEyeC All I can say is dayum. Killed it for an outdoor wedding with around 150 people. Had it elevated about 2 feet.

Does it work good with a dj mixer?

@DjMartiniMidwest

6 ай бұрын

Thanks for watching and your question. The party 10 would work fine with a mixer or dj equipment. But I would recommend the ProReck 2000 over the party 10 in my opinion. It’s an overall better experience for DJing . Thanks Reference link: #Amazon Affiliate #Commissions earned ProReck 2000 amzn.to/487xLq2

How much of an audience does this cover? 150 - 200 for the pair?

@DjMartiniMidwest

3 жыл бұрын

I would say 100 max .. They are short , maybe on a stage (elevated... 150) . Too be safe and have the best sound for the crowd . My opinion. Thanks for the question and watching.

I want to change the woofer what do you recommend?

@DjMartiniMidwest

2 жыл бұрын

Thanks for watching and your question. I don’t know what a exact replacement would be and the correct fitment ( could require alterations) but I would take the old speaker out first and see if it is a 4 ohm or 8 ohm speaker. Then these goldwood sound woofer have been good replacement speakers for me . Thanks . #Commissions-earned amzn.to/3iFPxbL

@thomasvalenzuela9381

2 жыл бұрын

@@DjMartiniMidwest i checked it out and it's an 8 ohm. I'm getting a kind of vibration on the bottom end I tighted all the screws in the cabinet and still makes noise would using a 4 ohm dual voice coil harm the amp I would have to wire negative to negative and run hot and ground to both red terminals. Oh I was a DJ back in the day for 25 years my son and his wife are both DJ's.

@DjMartiniMidwest

2 жыл бұрын

@@thomasvalenzuela9381 that’s awesome a DJ family . Lots of experience. Glad I can help in Any way. . Unfortunately I honestly just don’t know if it would affect the amp or any else .. ProReck doesn’t post a lot of information exact watts / rms / amp class . The Speaker will work but I would monitor heat and max volume . I Also would use 200 rms speakers or less . Let me know how it works if you try it out . Thanks

@MyBiggbear

2 жыл бұрын

Thank's I thought about it over heating the amp to. I just order a Eminence 10" 500 watt sub 8 ohm see how its going to handle. I was first gou g to purchase the Mackie Flex but wasn't in stock. so I went with the Proreck. I run Mackie Pro 12 having the EQ makes a big difference on the high end puts out enough highs thank again your awesome.😊

Man that Intro

PLEASE!!! Turn on a LIGHT!

@DjMartiniMidwest

2 жыл бұрын

Thanks for watching and your feedback. Since this video I have improved my lighting a bit . I’m always learning and trying to improve my videos.

@lawrencegenereux8567

2 жыл бұрын

@@DjMartiniMidwest Cool. I really appreciated your video, but the back-lighting made it hard to see detail. Thanks for getting back to me. I subscribed.

........ Headphones user here.... just wondering where to direct my claim for hearing damage compensation.. Seriously though your intro may have factually damaged my hearing. Thanks for warning me.... I would make some jokes about the DJ that can't mix but the free tinnitus is making me nauseous. Good luck marketing audio equipment to the newly deaf.