Will be nice to have video with night drive and oncoming traffic ... will be good test of visibility

@vtgtsvlogs9152

3 жыл бұрын

Sure will create one and share.

Good work bro. Appreciate your effort

@vtgtsvlogs9152

3 жыл бұрын

Thanks a ton

Super ​👍​

@vtgtsvlogs9152

3 жыл бұрын

Thank you 👍

Was looking for this Thankyou. I have 2 questions. 1) to get the headlamp out, you need to removed the grill and the bumper? 2) where to source the round dust cover?

@vtgtsvlogs9152

3 жыл бұрын

Hello, 1. Bumper and Grill are seperately attached to car, you need to remove Bumper to remove the headlight unit, and it is must to remove it as there is no space to change the projector light directly. 2. You may get the dome dust cover from Amazon: www.amazon.in/gp/product/B084624MQM/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

@aswinap6752

3 жыл бұрын

Thanks brother for this info. However thr link doesn’t seem to work for me. If you know the diameter/ size of the dust cover i can search it online myself too.

@vtgtsvlogs9152

3 жыл бұрын

the one in the image in the video, is specifically designed so that you may cut it as per the required size that fits in any car. I had to cut the dome cover till the last rim to fit in Skoda Rapids Projector side, it would have been differnt rim for Hi beam side, its one dome cover which will fit on any car. To be specific, the projector side needs 65mm dome dust cover, you may get 65mm dome.

Wonderfully explained, Did u get any issues with your warranty due to aftermarket LED headlights?

@vtgtsvlogs9152

2 жыл бұрын

As there are no wire cuts and also the lights are well within the wattage limit of OEM lights, so there should be no issues with Warranty, also my car has visited the service center twice after changing the lights, they do check the complete car and did not raise any alarm.

@himanshutewari5045

2 жыл бұрын

@@vtgtsvlogs9152 Thanks I have Rapid Style 2018 and mechanic was able to fix LED in low beam (projector) without needing to tamper the dust cover, so domes were not needed . But he could not install LED in the High beam as the space inside is not sufficient to insert LED with a fan, was this the reason you chose to put Bulb in high beam instead? Also, with mixed lighting setup (Different colour temperatures) in your car now, are you comfortable driving on highways or considering high beam also getting replaced with LED?

@himanshutewari5045

2 жыл бұрын

Going thru other comments below, all my questions are answered. You are doing a great job for the Rapid community and very promptly responding to all comments, Thanks once again.

@vtgtsvlogs9152

2 жыл бұрын

Happy to answer again, Fitting LED in Hi beam was not a big deal but i preferred to keep the halogens, as this also solves the issues of driving in Rain (yellow light difference) and also LED has very bright light and it scatters a lot if we put it in reflector type headlight, tough i have put LED in reflector type Fog lamps, but have made the old school jugad to minimize scattering by putting a black tape at top section of Fog lamp. Car looks different from crowd and has better light throw in city and Amazing on highways.

@abhijeetat

2 жыл бұрын

Definitely you loose warranty after any after market fitment. Company scanners with catch diffrence in circuits...

Hi dear ..nice informative video... appreciate ur work...Need ur suggestions...I have Rapid onyx TSi Nov 2020 model with having a high beam reflector n projector set up in low beam ..fog is also reflector set up.....What is the best solution for it ??? Pls reply as soon as possible....

@vtgtsvlogs9152

2 жыл бұрын

Thank you for appriciating the content, videos on my channel are created to help Skoda family. I also have a Rapid MC which has same setup as yours, If you see other videos on channel you will find more information on the setup that I have, to tell in short here, I have: 1. Philips Xtreme Vision Gforce 55 watt H7 halogen in Hi Beam reflector. 2. LED with approx 50 watt, 9000 lumex each light in Low beam projector. 3. Fogs are upgraded from 35watt H8 halos to Philips Xtreme Vision Gforce 55watt H11 halogen. See other videos on channel to see the upgrade of Fogs and adjusting lights to see the actual effect of headlights. Hope this helps.

I am having rapid rider plus. Is there any provision for replacing halogen bulb with led only for low beam? If yes, which type of bulb to be fitted there?

Bro I have 2020 Rapid Ambition.. I am confused about projector led hid halogens!! I want to upgrade as visibility isn’t good. Can you check and help me?

@vtgtsvlogs9152

2 жыл бұрын

I will suggest to update the fog lamp bulbs also, put H11 55watt Halogen in place of H8 35watt halos. About Projector upgrade: Putting Philips Xtreme vision Halogen will marginally improve the visibility. Putting HID has lots of heat issues, it will spoile the projector in some time by melting the inner components. Putting LEDs with more than 15000 Lm lights throw is best to fit, it does not need separate wiring or relay, just need the Adaptors are need as shown in my other video.

Thanks for sharing. I've been watching your videos regarding Philips Xtreme vision g-force and got those for my rapid style. I have a couple of questions: 1. Isn't HID a better option for projector headlamps instead of an LED light? 2. How much better do you feel the low beam is now in comparison with Philips halogens?

@vtgtsvlogs9152

3 жыл бұрын

Hello Ketan ji, 1. Yes, HIDs are better choice but the amount of heat they generate certainly spoil the Project with time, If you want you should fit not more than 35 watt HID. I wanted to fit in LEDs as those are much brighter and has better life and it was challenge to fit LEDs in Rapids Projector. 2. Low beam is many time brighter as compared to Halogens and with set of proper aligned Fog lamps with H11 (55 watt) bulbs, it is AWESOME.

@saimanyam

3 жыл бұрын

Warranty will not void right?

@vtgtsvlogs9152

3 жыл бұрын

we are not cutting any wire, so warrant should not void, also never mention if you at all upgrade the fog light bulb from 35watt H8 to 55watt H11 to anyone at service center, i have been to service twice with H11 for the batter change and a service but didnt talk about H11 in fogs.

I have a new rapid rider plus.. Yellow one.. Can u please help me with the upgrades.. What should I do in minimum investment..

@vtgtsvlogs9152

3 жыл бұрын

I am assuming that Rider plus has single reflector for both Hi and low beam and answering the question accordinlgy, please let me know if headlight setup on your car has different setup. With Minimum investment, i would suggest to upgrade the bulb in the main headlight unit, upgrade it from company fitted H4 halogen to Philips Xtreme vision or Osram laser vision H4 halogen bulbs, it should not cost around INR 2K for two lights. If you can, add fog lamps, and put H8 bulb in it (Refer my other video on fog lamp upgrade). Hope this helps.

@dendendeer8388

3 жыл бұрын

@@vtgtsvlogs9152 this is a gem of a work you are doing.. Amazing.. Huge respect for you.. And what about DRL those are cheaper.. Will I be able to add it after these vision blue bulbs

@vtgtsvlogs9152

3 жыл бұрын

Thank you for appriciating the work, its created to help the Skoda community. Adding DRL is a totally different work, it need the headlight assembly removed, opened and then DRL would be added, it can be costly affair. As my car is top of the trim (Rapid MonteCarlo), it came with DRL already fitted in. Also the halogen bulbs I suggested in my previous reply are not blue in shade, those are brighter than stock bulbs, for blue lights you need to change the bulbs to philips crystal vision or Diamond vision bulbs.

@dendendeer8388

3 жыл бұрын

@@vtgtsvlogs9152 so after reading this I directly went to the upgrade shop..he read the comment.. And said..its the most accurate on skoda rapid.. And asked me to buy it online and he would fit in for mere 150rs.. Can I get the link for Philips extreme vision or osarm..s

@vtgtsvlogs9152

3 жыл бұрын

H4 bulb link: www.amazon.in/PHILIPS-XtremeVision-G-Force-headlight-bulb/dp/B07ZRRBXR2/ref=sr_1_1?crid=32GB7RKK3TFQ1&dchild=1&keywords=philips+xtreme+vision+plus+h4&qid=1628522046&sprefix=philips+xtreme+%2Caps%2C316&sr=8-1

Please Tell me your experience of white LED light visibility on cement road.

@vtgtsvlogs9152

2 жыл бұрын

Sorry for late reply, Visibility is good with white headlights, also I have upgraded the Fog lamps to white LEDs, will post video on it soon. Visibility has certainly better than yellow lights as LEDs are much brighter.

Thanks bro for your effort.. for 2015 model with single h4 single barrel reflector light, which upgrade u suggest which is cost effective ?

@vtgtsvlogs9152

2 жыл бұрын

Go for Philps xtreme vision or Osram laser vision halogen H4 bulbs, also if you have fog lamps then upgade those with 55watt H11 bulbs as fogs are fitted with 35 watt H8 bulbs as i have shared in one of my video, this would be plug and play and cost affective upgrade.

@jinurajkr

2 жыл бұрын

@@vtgtsvlogs9152 Thanks brother for your time. Will try it out

Hi brother thnks for beautiful info pls suggest me I hv skoda rapid ambition 2020 model. Today I hv updated my hi beam light to LED aozoom 55W but its no use light throwing wherever it wants they charged me 8500. Pls help wt should I use I hv wasted 85000

@vtgtsvlogs9152

2 жыл бұрын

Sorry for late reply, Put those LEDs into the Low beam projectors, that will increase the light in proper projected direction and get Philios Xtreme vision plus for High beam. Hope this helps

Hi bro i am in big trouble I bought nighteye led h7 but as soon as i started fitting there is a metal clip lock as u shown in the video in Your clip has circular gap in between mine doesnt it has rectangular where can i get that clip lock Plz send me the video how to remove the bumper of skdoa rapid Plzz sir

@vtgtsvlogs9152

2 жыл бұрын

I got those adaptors/clips on Amazon, I just checked again but those are not available now, you will need those Adaptors to fit LEDs. I went to a mechanic to remove the bumber and refit it as I was not able to remove it.

Love your videos on Skoda rapid especially this one. Tried and tested by you on various combinations for best light output. I had infact upgraded both high and low beam to LED, but output is not great in high beam. As suggested by you, I am going to downgrade it to philips halogen. But the issue I am facing is in the H7 bracket. While fitting the LED, the original bracket was modified and now the halogen will not go into it and I am unable to find the original H7 halogen bracket anywhere. Do you have any idea as to where this might be available.

@vtgtsvlogs9152

2 жыл бұрын

ooh, you should not have modified the original ones, but i guess the ones in the link should be fine or there will be more suggestions as you browse this link.. www.amazon.in/Headlight-Bulbs-Adapters-Holders-Retainers/dp/B08ZY8VN1P/ref=pd_day0_14/257-2964274-2932801?pd_rd_w=VU5MI&pf_rd_p=ddf3065d-37bd-4713-89a2-28f76ee88912&pf_rd_r=C42P8P8ET1DQ0S8D4H61&pd_rd_r=2da13774-37b9-47de-94f9-c414d750bd61&pd_rd_wg=7zN01&pd_rd_i=B08ZY8VN1P&psc=1

@vtgtsvlogs9152

2 жыл бұрын

did you upgrade the Fog lams also, that will be a great change from 35watt to 55watt bulbs, it just changes the game..

@satishkumarsharma8211

2 жыл бұрын

@@vtgtsvlogs9152 no, I haven't upgraded the fogs. Am little sceptical as it will be 55W in a 35W original assembly. But since you have already told that the wiring is same as that of headlamps, and you are already using it for around a year now, I will change mine also.

@satishkumarsharma8211

2 жыл бұрын

Also, do you have any idea as how to disable the freezing of odometer panel when our speed is more than 80. Beeping sound is fine but they disable everything once we cross 80KMPH

@vtgtsvlogs9152

2 жыл бұрын

That can be done at Service center, as a change in software, but it would be a total laps of warranty as that will neglect all paramters set by government and can cause total loss in case of any issues..

I Like this upgrade but and I also went ahead and swapped the fog lamps but I couldn’t swap the high beams as LEDs over there can’t be placed due to the cover being too close do you have any suggestions?

@vaibhavturaskar3668

Жыл бұрын

I have made a jugad for that i have extended the headlight unit cover hole using a thick PVC pipe, solves the purpose, to check PVC pipe do take the rubber dust cover off high beam light back.

Please do something about rapid riders lights

@vtgtsvlogs9152

3 жыл бұрын

As Rider has one reflector for both Hi and Low beam, it has H4 bulbs in it. You may upgrade the stock bulbs with Philips XtremeVision or Osram NightBreaker Laser H4 bulbs, this will definately get you better light throw.

Link for buying the LED?

Bro why didn't you change the highbeams too to leds

@vtgtsvlogs9152

Жыл бұрын

Hi Beam is a reflector type, and when you put a LED in reflectors, the light gets distorted a lot and do not form a beam pattern that we get from Halogens, you must have experienced with a Car on Hi or Low beam with LEDs in Reflector types blinds you and even as driver of that car you do not get persistent beam as desired for Highways.. I have put LEDs in Reflector type Fog lamps but have used the old way of putting black stripe at the top section of the reflector glass.. but that is not possible on main head light unit as it is at height and putting a black strip on it will not look good.. Hope i answered the question.

@DeepakKumar-sd7se

Жыл бұрын

@@vtgtsvlogs9152 thanks bro..

Hii bro, so i have skoda rapid 1.5 tdi AT diseal 2015 , i am facing a lot of issue with the headlights(projectors), tried changing halogen bulbs but the light throw on road is just horrible i mean nothing is visible in low beam and have to drive in high beam always, that too doesn't make a diff.What will u suggest i should do?

@vaibhavturaskar3668

Жыл бұрын

You should add high lumen LED in projectors as in my videos, and also put H11 halogen bulbs or LEDs in fog lams it does make big difference as shown in my videos..

@kdeepraj4900

11 ай бұрын

​@@vaibhavturaskar3668can you suggest any led for low or high beem available online

Hi Bro How led light performance on rain ???

@vtgtsvlogs9152

2 жыл бұрын

Its good compared to stock or 55 watt Halogens, as the light from LEDs is much brighter. While driving in Rain I do prefer to put on the 55 watt Halogen Fogs with low beam LEDs to add more light, just to be on safer side. Hope you got your answer.

@prawinb7

2 жыл бұрын

@@vtgtsvlogs9152 thank for your answer.. the one you using is not available in Amazon . Can you suggest some other led with same or more performance

@vtgtsvlogs9152

2 жыл бұрын

I got it from CloudSale, they sale it on Amazon alos, you may refer below link www.cloudsalestore.com/headlights/nighteye-led

@vtgtsvlogs9152

2 жыл бұрын

www.cloudsalestore.com/product/novsight-h7-led-headlight-bulbs-tx-smd-led-chips-all-in-one-conversion-kit-6000k-cool-white-90wset-15000lm-7500lmx2

@prawinb7

2 жыл бұрын

@@vtgtsvlogs9152 out of stock bro

I am planning to upgrade all lights to leds. Below are my choices High beam : AUTOBAHN LED A6 G-XP3 Automotive grade 100W 20000lm 6500K white Headlight bulb (12V,50W) Low beam: Easy Eagle H7 LED Headlight Bulb, 60W 12000Lumens Extremely Bright Conversion Kit CSP Chips 6500K Cold White Fog lamp: Carzex Genuine H8/H11/H16 LED Fog Light Bulbs, 72W/15,000 Lumens Super Bright LED Fog Lamps Conversion Kit for Cars 6000K Cool White Parking lamp :Osram LED T10 2825DW-02B Parking Lamp (12V, 1W) for All Models Also I have added H7 Adapter: Pair H7 LED Headlight Bulbs Adapters Holders Retainers for Audi BMW VW Dustcover: AUTOBAHN Rubber Housing Seal Dust Cover for H1 H4 H7 H11 9005 9006 HID LED Conversion Kit (Pack of 2) Will it cause any issue to battery?

@vtgtsvlogs9152

2 жыл бұрын

Thank you contacting with your query. With the configuration you have shared, YES, it will cause load on battery and battery may die sooner than expected timeline. If you have made your mind to do this upgrade then make it a practice to not to put on lights when engine is off. Put the headlights on only when Engine is ON, do not keep you car in Auto Headlight setting as it puts on the light as soon as you put the key in car, that drains the battery. I also have put LEDs in Low beam and Fog lamps, LED in low beam projector has no issues as light is well directed. but in reflector type fogs the light scatters a lot, so i have put a black tape at the Top section of fog lamp (as it was done in old days) to prevent light getting into eyes of incoming traffic.. Hope this help.

@nidhinp.v2991

2 жыл бұрын

Thanks for the update. Do I have to use extra big dust cap covers for headlights as I heard the stock one will not fit when you put leds to it.

@vtgtsvlogs9152

2 жыл бұрын

yes, you will need big dust covers of 70mm diameter for Low beam projector section, make sure the LED light is not touching any section of headlight unit body or to the dust cover, as it may melt the sections and cause damage to car and in case fire also. I have made a jugag to extend the Headlight unit section by extending it with PVC water pipe joint and then put the dust cover. Please make sure the the light wire is also moved away from LED body.

@nidhinp.v2991

2 жыл бұрын

@@vtgtsvlogs9152 UPDATE : I have tried the above combination. It worked for low beam as well as for fog lamp, even without changing the dust cover :) .Unluckily for high beam the housing is very close to the rear end of bulb holder, so couldn't fit led to it. The dustcap opening is exactly not opposite to the bulb holder, it placed side ways so cannot insert the led bulb as the fan and heat sink is projecting outside the holder. So I had to go with Osram halogen (night vision breaker laser 55w) bulbs for high beam. I am trying to find an led with smaller fan and heat sink. If you have any link please do share.

@vtgtsvlogs9152

2 жыл бұрын

I would suggest to keep Halogen in Hi Beam and try it out for a while, you will be happy to keep it all the while.. cos in City we dont need Hi beam, so this wont affect how the car looks in City and on Highway who cares.. ;)

Olá, esta óptica com projetor leva h7 ou lâmpada de xenônio?

@vtgtsvlogs9152

3 жыл бұрын

Olá, A empresa adapta a lâmpada halógena H7, atualizei com a lâmpada LED H7, você pode instalar qualquer lâmpada compatível com o tipo de conexão H7, seja ela LED ou Xenon. Para instalar o LED, você precisa ter o clipe do adaptador com orifícios redondos, como mostrei no vídeo, caso contrário, os LEDs não cabem. Espero ter entendido sua pergunta e respondido. Por favor, deixe-me saber se você precisar de algum esclarecimento.

@tiagodadias

3 жыл бұрын

@@vtgtsvlogs9152 entendido! A ótica de origem vem com h7? Pergunto, porque no meu tenho ótica sem projetor, teria que comprar a ótica oem com projetor com h7 em vez de xenon para fazer aplicação directa em termos de conexões do carro com a ótica com projetor

@vtgtsvlogs9152

3 жыл бұрын

Desculpe perguntar, mas não estou conseguindo entender, o que é óptica de origem com H7?

Can you please provide the specification of each light. Thanks

@vtgtsvlogs9152

3 жыл бұрын

Hello Saiji, below is the combination of lights in my Rapid MonteCarlo: 1. Hi Beam (reflector) - 55 watt (each bulb) - H7 halogen bulb - Philips XtremeVision GForce (brighter than stock). 2. Lo Beam (projector) - 50 watt 9000Lumen (each LED) - H7 type LED lights - NovSight light (they brand the same lights under varios brands). As its H7 type led, there is no wire cut required, just need the adaptor as i showed in video. 3. Fog Lights (reflector) - 55 watt (each bulb) - H11 halogen bulb (upgraded from 35 watt H8 bulb to 55 watt H11 bulb) - Philips XtremeVision GForce (too bright than stock) Hope I answered the question

Bro can LED lights shall be fitted in 2013 model rapid Diesel ambition plus model. Pls suggest

@vtgtsvlogs9152

2 жыл бұрын

LEDs can be fitted in any car just the type of bulb/light matters, if your car has single Projector or Reflector for both Hi and Low beam then it will have H4 type bulb, if it has separate lights for Hi and low beam then it will have H7 type bulb, so fit a proper LED accordingly. Hope I have answered your question.

@mayankgupta6395

2 жыл бұрын

I have a same question bro ,mine is 2014 ambition plus and I badly need the headlight upgrade ,Plz suggest the best possible thing

@mayankgupta6395

2 жыл бұрын

@@vtgtsvlogs9152 please suggest a headlight upgrade for 2014 ambition plus rapid .

@vtgtsvlogs9152

2 жыл бұрын

Sorry for late reply, you may upgrade the existing halogen bulbs with Philips Xtreme vision plus, halogen bulbs, plug and play option for better visibility at night. LEDs are not preferable in reflector type headlight unit as light from LEDs scatter a lot and do not provide desired results.

what have you chosen for Fog lamps?

@vtgtsvlogs9152

3 жыл бұрын

I have replaced the H8 (35 watt) halogen with H11 (55 watt) halogen in Fogs, I have created video on upgrading fog lamps, you may refer it.

Can you suggest one LED for high beam instead of halogen bulb, if you can give me a link it will be helpful. Thanks in advance 🙏

@vtgtsvlogs9152

3 жыл бұрын

I will not suggest to put LED in Hi Beam, as the light distorts a lot and will certainly blind the incoming traffic. Keep the halogen in Hi Beam and upgrade the Fog light to 55 watt and align it as shown in my other videos, that will resolve the issue.

@jayasureshkumarv4448

3 жыл бұрын

@@vtgtsvlogs9152yes you are right, if it affects others we should avoid it 👍. I thought of matching both High beam and low beam colours. Can you suggest some halogen bulb spec (preferably philips make) which fits in to projecter, So that both colour looks similar.

@vtgtsvlogs9152

3 жыл бұрын

Go for Philips Crystal vision, dimond vision H7 halogen bulbs for Hi beam, and H11 for Fog lamps to match color. H7 bulb: www.amazon.in/Philips-12972-Diamond-Vision-Headlight/dp/B00NAZICQG/ref=sr_1_1?dchild=1&keywords=philips+diamond+vision+H7&qid=1624095507&sr=8-1 H11 for Fog lamps: www.amazon.in/Philips-12362-Diamond-Vision-Headlight/dp/B00NAZGMOA/ref=sr_1_9?dchild=1&keywords=philips+diamond+vision+H7&qid=1624095507&sr=8-9

@jayasureshkumarv4448

3 жыл бұрын

@@vtgtsvlogs9152 Thank you 👍

Bro do you know what type of adapter for high beam ? Led h7

@vtgtsvlogs9152

2 жыл бұрын

Sorry for late replay, this one at Amazon should be perfect fit for Hi beam. www.amazon.in/Aluminum-Retainer-Corrosion-Resistance-Headlight/dp/B09YSVRZX1/ref=sr_1_2?crid=72AH9KVQSGA0&keywords=led+holder&qid=1654509265&s=automotive&sprefix=led+holde%2Cautomotive%2C187&sr=1-2

brother from where will i get it any online site? and please tell the name of the company cause i bought one but its not fitting so please help me

@vtgtsvlogs9152

2 жыл бұрын

I got the H7 type LEDs from Cloudsale store online, www.cloudsalestore.com/headlights/nighteye-led Its not the LEDs, its the type you got, you should get the LEDs of H7 type fitting and refer my video where I have talked about the Adaptor which holds the LEDs on headlight unit, also you would need the extended back cover as the LEDs are bigger in size, please let me know for any help required.

Pls share this fitment link pls I used to fit led from after they fix led bulb with damping😭

@vtgtsvlogs9152

3 жыл бұрын

a. You my get LEDs from any online store, b. The Adaptors were available on Amazon but currently its not available. If there is any specific ask then please let me know.

@ermechanic424

3 жыл бұрын

@@vtgtsvlogs9152 i have led , car accessories owner stick the led bulb in headlight with damping

@ermechanic424

3 жыл бұрын

@@vtgtsvlogs9152 actually i have base varient of rapid 'rider ' and i purchase second hand projector lamp so the fitter fit led bulb in light with the damping sheet

@vtgtsvlogs9152

3 жыл бұрын

Oh, so you mean to ask for the Adaptor that I have shown in the video? There are two different types of Adaptors in Rapid with Low beam projector and Hi beam reflector, I do not know which adaptor will fit in Rider variant. I am sharing link for the adaptors for Lo beam projector in Rapid, please see if it fits Rider. For Projector in Rapid (currently not available in India): www.amazon.in/gp/product/B08SKF3V56/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Bro, where can get that steel adopter

@vtgtsvlogs9152

2 жыл бұрын

Sorry for late replay, this one at Amazon should be perfect fit for Hi beam. www.amazon.in/Aluminum-Retainer-Corrosion-Resistance-Headlight/dp/B09YSVRZX1/ref=sr_1_2?crid=72AH9KVQSGA0&keywords=led+holder&qid=1654509265&s=automotive&sprefix=led+holde%2Cautomotive%2C187&sr=1-2

@vtgtsvlogs9152

2 жыл бұрын

Low beam adaptor www.amazon.in/Aluminum-Adapter-Headlight-Professional-Durable/dp/B09HDT1HM2/ref=sr_1_16?crid=72AH9KVQSGA0&keywords=led+holder&qid=1654509265&s=automotive&sprefix=led+holde%2Cautomotive%2C187&sr=1-16

Bro what LED is this ?

@vtgtsvlogs9152

2 жыл бұрын

These are NovSight 18000 Lumen (9000 Lm eacg light), can be bought from www.cloudsalestore.com/collection/led-car-headlights when available.

Where u got h7 adapter

@vtgtsvlogs9152

3 жыл бұрын

I was searching for it since more than a year on varios sites, finally got it on Amazon. Below in the link are the one which fit in lo beam Projector, for Hi beam reflector its a different Apaptor. www.amazon.in/gp/product/B08SKF3V56/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Bro share links of the products pls

@vtgtsvlogs9152

3 жыл бұрын

Hello, I got the set of LEDs from Cloudsalestore (they sale at Amazon and also have their own site with discounted price for same products and are genuine), I am not able to find the same LEDs that i got from them last year but you may get the ones in the link: www.cloudsalestore.com/product/novsight-led-headlight-bulbs-conversion-kit-6500k-xenon-white-90wpair-12000lmpair-type-h7 Got the Adaptors from Amazon: Currently unavailable but these are the only adaptors that fit in Projector:/ www.amazon.in/gp/product/B08SKF3V56/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 One more thing get the H7 LEDs, there are no wire cut required.

Can u please share me link where to buy h7 clip?

@vtgtsvlogs9152

2 жыл бұрын

the Adaptors, I got those from Amazon, let me check if those are available.

@vtgtsvlogs9152

2 жыл бұрын

www.amazon.in/gp/product/B07SQZTWZN/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 these are currently not available

@vtgtsvlogs9152

2 жыл бұрын

Hey, try to get the ones in the link to fit the LEDs. www.amazon.in/H7-LED-Base-Adapter-Mercedes-Benz/dp/B08271HQM1/ref=pd_day0_2/257-2964274-2932801?pd_rd_w=VU5MI&pf_rd_p=ddf3065d-37bd-4713-89a2-28f76ee88912&pf_rd_r=C42P8P8ET1DQ0S8D4H61&pd_rd_r=2da13774-37b9-47de-94f9-c414d750bd61&pd_rd_wg=7zN01&pd_rd_i=B08271HQM1&psc=1

hi can you share the link of these LED bulbs. mine is the black package.need to change the lights urgently,can u share your contact details, just so i can get an clear idea from you

@vtgtsvlogs9152

Жыл бұрын

These are NovSight 18000 Lumen (9000 Lm eacg light), LED can be bought from www.cloudsalestore.com/collection/led-car-headlights when available, you can check more options available. Please let me know for any help required.

for low beam, led light size not fitting , what to do..

@vtgtsvlogs9152

Жыл бұрын

first thing first. 1. Do you have the Adaptor clip the one that I have shown in my video, Adaptor with round hole to fit LED in it?? 2. When you say LED Size not fitting, is it that it is not getting accommodated in the head light assembly or something else? Let me know more details when you say LED Size, so as to understand the problem.

TSI ??

@vtgtsvlogs9152

3 жыл бұрын

Nope, its TDI with DSG.

Total Price bro

@vtgtsvlogs9152

3 жыл бұрын

My Setup costed me as below: LEDs - 5000rs Adaptors - 500rs (should cost not more than 150rs including shipping from China, but i didnt had options) Dome dust cover - 550rs Fitting charges - 600rs Total cost of LED fitting - 6650rs Other than this, I have changed the Hi Beam halogen to Philips Xtreme vision GForce H7. Fog halogen from H8 (35 watt) to H11 (55 watt) Philips Xtreme vision GForce you may get the dome dust cover from Amazon: www.amazon.in/gp/product/B084624MQM/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

@DRayyapparaj

3 жыл бұрын

@@vtgtsvlogs9152 yes inspired from your video, I have changed the fogs just like what you said. Thanks for that🙏

@vtgtsvlogs9152

3 жыл бұрын

Did you also align the fogs a bit up, it throws better light.

@DRayyapparaj

3 жыл бұрын

@@vtgtsvlogs9152 yes I did... Now I am completely relying on fogs... Fogs are contributing more than 50 percent of the total lights in my car

@vtgtsvlogs9152

3 жыл бұрын

AWESOME isnt it.. It feels really good when i find my videos and research (i would say the risk) help the community.