I forgot to put the PO box on the screen!! If you'd like to send us something, this is our shipping address: PO BOX 352 Somis, CA 93066

@trevorupton6904

3 ай бұрын

Thank you for the address. I was just gonna ask you for that. I have something special for you guys. Hope to see great. Looks on your faces when you open the boxes. Cheers love your videos. Keep up the good work.

again another awesome weekly video . i like how olivia isnt afraid to get in there and get the dirty work done with danny.

I did the bottom of my 1971 challenger with a Harbor Freight air "Needle Scaler" chisles dry undercoating like shaving a sheep 😂

For tools from Harbor Freight, the floor Jack's and transmission jacks.

The Pittsburgh impact sockets work great, I have the Daytona jack, works good too. I had burnt oil on my exhaust header pipe, oven cleaner and a rag took it right off!

Word to the wise… Never ever throw anything away until you are finished with a project… ask me how I know… lol

Olivia looks so good with her hair up. Needs to put it up more often.

The other day you guys were talking about the inside of the 56 smelling bad. I use a machine called an ozone generator that can be purchased on Amazon or eBay for a couple of hundred dollars. They work awesome! They shock the air particles and bacteria. Let it run for a specific amount of time closed up come back and air out don't breath a lot when you open the car to air out. I used it on mouse smell on old Oldsmobile first and several times since on other vehicles. Thanks, Chad Erickson

For strapping the bike...order a "canyon dancer strap" for the handlebars...and in the rear, best to strap it around the frame in a way not to compress the rear shock....above the footpegs is the best...dont strap it over that rear rack...that will compress the shock... A canyon dancer strap for front is cheap insurance...

The Charger is getting a darn-near full resto with it stripped down and cleaned like you did...Can't wait to see it finished...Great Vid tonight too!!!

Really seems like you two are gaining traction with the different builds! I know projects can take longer than expected!! Bored and rebuilt my dodge pickup engine a few years ago, engine block and heads sat at the Machine shop for several months longer than expected, followed up by being sent the wrong crankshaft twice...Took much longer than planned... Saving Grace was my little Honda Rebel 250!! Nice for getting around town for sure!

I bought a 3 ton jack that I love

@newtonfirefly3584

3 ай бұрын

emotion and emotion basis are certainly incorrect, imbalanced, false based, misleading, false portrayals, narratives, claims ! 😞 Good Luck

That’s right Danny, always use the proper improper tool!! lol

I feel like pressure washing like that has to be illegal in CA. LOL

@BillyJoeJimBob28

3 ай бұрын

Yeah, like the sewer police are going to show up in the middle of the night & drag Danny out of bed! We know you washed draino, soap & clay into the sewer drains! Come with us offender! No! You cannot say goodbye to your cars mister! 🕳👮👮‍♂️🕳 😂😂😂😂

@newtonfirefly3584

3 ай бұрын

Emotions never have proper basis, ideas, information, knowledge, thinking, logic, reason, reasoning, thus always results with incorrect results, falsehood, false, incorrect, misleading claims, ideas, concepts misconceptions, misinformation, disinformation ! 😞 Good Luck

That barracuda almost made you homesick don't forget my vise grips cleaner.

Starting the engine in the box was pretty cool

@calvinw2519

3 ай бұрын

You need to sandblast that car

Too Cool! That bike is a great way to learn and have fun at the same time.

@trentdawg2832

3 ай бұрын

Yea i have a xr200r…..cool bike , but mines not street legal😢😢😢

You guys are so awesome!

Great job. Thanks for sharing with us

I have Snap On, Mac, Matco etc, but I do also buy some stuff at Harbor Freight, their toolboxes for how much they cost are hard to beat. That being said, I strongly recommend against their wire wheels, especially the ones that go on 4 1/2 inch angle grinders, they spit the wires out like little missiles, and you will being finding them for the next 6 months.

What a "not afraid to get dirty" gal you are Olivia. Any guy would want your help out in the workshop. Nice presents you got at the end of the video.

Absolutely love your videos!!! Great camera work and high definition! I wish I lived in California 😅I could watch all day🤠

That made me laugh: throw him a twenty 🤣

I hate deep cleaning grime but your floorpan has plenty of drain holes so that's a plus! Haha

nice job, buy a removable plastic brace that goes between the front tire and front fender more stable

Great video guys! Great tip on the oven cleaner, I could have used that years ago back when I was doing some similar vehicle restorations. I'm too old now and just live vicariously through you guys. LOVE this Charger build!

What an excellent video. I am telling everyone up here in Calgary about you two. You are great. I love that under carriage sprayer! Can't wait for the next video

@GnarlySpeedShop

3 ай бұрын

Thank you!

What ever the straps rub on it will ruin the panel on the motorcycle.

She cleans up nicely. You guys are going to love the bike.

@BillyJoeJimBob28

3 ай бұрын

The car or Olivia? 😋

I have a 72” US General tool box. Does everything I need it to do.

Perfect setup great job you too ok have a great night

Hi guys, stop talking and get it done,cover up and get the scrappers and wire wheels and then power washer going and spray the under side with tremclad rust paint, love your podcasts keep up the great jobs on these classic cars.😎🇨🇦

What a great video, you two are so enjoyable to watch, Liv's enthusiasm always makes me smile, charger is looking great ❤❤

Hey guys, I haven't been to a Harbor Freight in a while, but typically buy small items, like air compressor replacement parts, dremel parts, vinyl gloves, metal trim removal set etc. I need to see if they have a plastic trim removal set and a larger sized pick variety set. I will need to buy some wire wheels and portable grinder to do some frame/body clean up myself, not sure what plug in grinder to go with. Glad the motorcycle carrier worked out. Happy to hear you sold the car/van, they both were awesome in their own way. Sawzalls are fun to use until they're not... lol, glad you are ok. You guys are giving me some motivation to work on my beat up 78 Bronco, waiting for warmer weather and I have to rebuild the 2150 carb too... my 1st ever rebuild, so I'm nervous. Then I can pull it outside to do some clean up work. No lift for me, will be on my back and side and I'm no young buck, I'll be 48 in the fall and hope to be able to drive my Bronco by the time I'm 50, lol... hopefully sooner, I need help but don't know of anyone near me in Allen Park, MI. Never thought of using oven cleaner, nice tip, I'll try to remember this. Olivia, looks like you had too much fun filming Danny power washing the Charger, lol... great job guys! 🍻

I have purchased US General tool boxes and carts, caliper piston compressor, pulley installation tool, aluminum floor jacks. All holding up well. And the 1195# folding trailer that I used to move a golf cart that probably weighed close to 800#.

I forgot that you had a 69 Camaro. My brother is currently building one. It will be a 418 cube stroked LS with a BIG cam - he's thinking about 600 hp, with a 4 speed auto and 3.73 gears. This thing will howl at the moon and still get 25 or mpg (that's Imperial mpg, because we're in Canada, eh).

Great job, awesome video....Cheers👍👍

Wow, I can’t believe how good of shape that car is good job guys. if it was here in Canada, it would be rotted completely out by the road salt.☹️

Olivia, when Danny wants to upgrade to a bigger bile, like a 250, the 150 will be a perfect bike for you!🙂👍👍👍

I am having my morning coffee watching you guys assemble a motorcycle carrier. What about Olivia’s 56 Chevy?

Really nice job on washing the charger 😊, I never knew anything about the extra power washer that goes under the car to power wash it like that, it was cool though 😊, thanks for the videos you do, I have learned alot about them, Ken 😊😊

Been haulin' a bike for a while behind my RV. Might want to put a couple extra straps on the there, one around the tire by the fork. Cannot hurt to be a little extra safe. Don't want to get there and find the bike is not there.

Looking good 👍👍👍👍👍😊

Very cool video....!!

You guys are so friggen prissy 😂😂😂😂😂

i bought the lime green 72'"rolling tool box cabinet. I love it. next best to Snap On

I buy Harbor Freight's cheap paint guns all the time! Grinding discs, flap discs, cutting wheels- all from harbor freight. Their go kart engines are awesome!

Okay I gotta know what the beef with Uncle Tony’s Garage is.

@GnarlySpeedShop

3 ай бұрын

No beef whatsoever!! Danny watches his channel but I don't.

@SirWilliamsHand

3 ай бұрын

Good to hear no beef! I was worried I missed something.

@Warrior_Resisting_Colonialism

3 ай бұрын

They're different kind of people, is all.

@SirWilliamsHand

3 ай бұрын

@@Warrior_Resisting_Colonialism who, Uncle Tony? Yeah, he’s hit or miss with content but a great Mopar historian and has some great tips for a complete novice like me.

@justinhromek73

3 ай бұрын

Good job on the vid! Loved it, can’t wait til the next one!

I needed to get a torque wrench and a 1/2 inch rachet set when traveling thru the US with my RV. Harbour Freight was close by and budget friendly. The equivalent in Canada is Princess Auto.

@newtonfirefly3584

3 ай бұрын

They can be good for some occasional use tools, when in a "pinch', quick need, since they are manufactured in CCP-China, they lack good, proper metallurgy, quality, durability, reliability, consistency. My first basic tool sets were from Sears, Craftsman, which are still very good, reliable, durable, with a very good quality, though not the level of professional tools as Snap-On and other similar quality brands. The choice between having very good quality to the best quality depends on the needs. Certainly the basic level for tools should be with at least good to very good, reliable, durable, quality similar with Craftsman. The only tools which are worthwhile, value, even for basic use are manufactured in countries with quality metallurgy; These are USA, Germany, Japan, Taiwan. All others are at most mediocre, with some as low as CCP-China among the lowest, worst, thus should always be avoided. All The Best, Sincerely

Love watching your videos guys ❤ ✌️ the charger will be awesome 👌

Thanks for the video my buddy just bought an NOS Grill for his 69 Charger it's Flawless in the Box yeah it was $2,000 that's crazy but it's a really nice have a great day thanks to the video I'm looking forward to the progress on the charger thanks for doing this it keeps me inspired

I use their abrasives and brushes. I own one of their hitch platforms designed for a wheel chair or scooter and haul a lawn tractor with it behind my truck.

I bought basic stuff, I call them disposable tools. Tool cabinet, I got Home Depot.. huge stackable for 300 on sale.

24:40 Hey! Don’t throw that out!

@BillyJoeJimBob28

3 ай бұрын

😂😂😂

This is the greatest car you are working on!!!!!

I believe that all hand tools are guaranteed for life.

I use a ton of icon hand tools and haven't had any fail on me. Milwaukee power tools though, i don't buy power there.

Harbor freight is a much better place to buy tools from now a days than it was in the past. Over half of my tools come from harbor freight. The quality is getting much better. I have Jack’s, impact wrenches, all kinds of sockets and ratchets. I even have those multicolored wrenches. I have purchased grinders and Saul’s in the past. Some of the electronic stuff is not the best but for the price you can’t beat it. Plus, if it breaks in 90 days, just take it back and get a new one. They also have lifetime warranties on, a lot of their hand tools.

I raced motorcycles for 16 years, always push the bike onto the ramp, never ride it up..a milllion videos are out there of fails….

I think that you will really like your new bike.

Harbor freight Viking 4amp battery charger maintainer item# 63350 saves and actually has brought back a few batteries of mine, get one for each battery, i got some little lawnmower batteries that are going on 5yr ☮️

Idk about Uncle Tony’s Garage, but Dead Dodge Garage is great!

That may be one of the chargers they used to make the movie bullet. You never know maybe that was a camera mount at one time.

i cant think of the name but there is a sealer you can spray the military use on there equipment never rust maybe military supply also I use to coat cabinets rustproof for NASA its called chromemate primer it also used military air craft and boring airplanes its industrial grade.

Yay, you got my maple syrop! Enjoy and keep up the great work :)

@GnarlySpeedShop

3 ай бұрын

Thanks again!

I bought a lot of ICON tools from HF, very very similar to snap on. I have several US general 5 drawer carts

@newtonfirefly3584

3 ай бұрын

perhaps similar in apparance, buy poor quality poor level metallurgy from CCP-China; Best metallurgy worldwide: USA, Gerrnany, Japan, Taiwan; all other are lower; some are just mediocre, while other as CCP-China are poor. 😞 Good Luck

I buy jacks, parts washers, blast cabinets, abrasives, cases. No hand tools.

I would put a pin in the rack with a lock. and I have a led light in the round circle in my 56 chevy tail light.

Uncle phoney!!!! Cousin of scotty kilmer😂😂😂…..stacey davids tennants😂😂😂

Power washing looked messy. Where's Andrew when ya need him!? :P

That's a great idea

I'm thinking some kind of crash bar. Or floorboard used to be used for Is that pipe in the frame. Truthfully I have no idea

Uncle Tony's is all talk no work I don't need to be schooled on a automobile history lesson!!! I just want to see some build and some gnarly work getting done...

Love your videos. Keep up the good work guys. Love the partnership 😊

Great work! 😃👍

dont you think that rubber shield is protection if transmission blows or clutch explodes racing off the chrismas tree drag light. at the drag race. and get a torch to scrape off rust proofing under carrage.

Did you guys make that wood cart/dolley the cars sitting on?

@BillyJoeJimBob28

3 ай бұрын

Yeah, it looked pretty A-ok! 😎👍

New subscriber. Enjoy your channel. 👍

OK, I was thinking. That small tube that is welded to your frame I believe the rear passenger side. Do you know the full history on your charger? A lot of times movie makers will weld a tube just like yours to the frame of the car. This usually holds a L bracket that holds a movie camera. I thought it was an interesting thought. also, do you know how I get rid of spiders? A WD-40 can and a lighter..!!

@BillyJoeJimBob28

3 ай бұрын

🕷 Oh Noo! 🔥

Is that a mudd flap screwed to the bottom of the floor board…..UNDER the car😮😮😮

There's videos on you tube about what to buy and not to buy at harbor freight.

How many hot rodders have a girl who would crawl under their nasty ass project car and do what Olivia did?

I wouldn't call myself a "professional", Id say... youtube certified haha

It look good keep up the good work I'm from Pa,

Hey guys I won the gift card from LACon but we don’t have in and out here as you know so I asked him to send it to you ✌️🤙🍻

@GnarlySpeedShop

3 ай бұрын

Barry!! You're feeding us a little too well these days 🤣🤣 Thank you again! We love in n out

Y'all keep the shiny side up on your bad motor scooter!

I buy all my tools at harbor freight. If you use the tool right it’ll be fine.

have you ever heard of surf guitar DUANE OR DUAWAYNE EDDY IN THE 60s he was tops .? ps like your music your future wife is a keeper.

The impact sockets are indestructible

@newtonfirefly3584

3 ай бұрын

False !! 😞

Get a spray bottle with water and Dawn soap to get those spiders.

Dead Dodge Garage RULES !!! but you two are nice too

Minutes of dangle

What company did you buy Ls engine and trans from?

deodarant+lighter for all your spider nests, good smelling solutions !!

Better figure a way to lock the bike and rack onto your truck.!! Straps can be cut in seconds and the bike is gone… Chain, cable, etc… Something more than just a couple straps. Also look into a receiver hitch lock… I can’t stand thieves, but they can be relentless… Hate to see thieves get your stuff.!!!

I torch Black Widow nests.

What did you name the XR150?

Get quality riding gear and after you outgrow the bike you’ll be set and still alive

Wheres the rotisserie? Look at Harbor freight. This job should be done right, if your going to do it yourself.

0:40 Those tool boxes are notorious for tipping forward when opening draws, they need to be counter balanced at the back. Crap design.