Project Code Red - The CRAZIEST Stingray Ray4 SUB mod we've EVER done! -LowEndLobster Builds
Музыка
Looking to snag one of these basses? Use my Reverb affiliate link!- reverb.grsm.io/lowendlobster
Hey everyone! Today we have a real treat... the greatest Stingray mod project we've ever done (so far).... This is... Project Code Red.
Parts Used:
Pickups x2- EMG MMTW: www.emgpickups.com/bass/mm-mo...
Preamp- EMG BTC Control: www.emgpickups.com/parts/bass...
Switch- EMG 3-POS TELE: www.emgpickups.com/parts/swit...
Bridge- Albridge: www.ampshopbassexchange.com/p...
Tuners- Hipshot Licensed Ultralite (3 bass/1 treble): hipshotproducts.com/collectio...
Pickguard- Custom order from Pickguard Planet: www.pickguardplanet.com/
Stock Ray4HH (2021 Revision) - • Updated for 2021! Ster...
Ray5HH (2020 Review) - • Sterling SUB Stingray ...
This bass and all my other basses with rounds are strung with MJC Ironworks Nickel Plated Stainless Steel 45-105(125) unless otherwise noted. Check them out at www.mjcironworks.com
Info on my signal chain, setup and more: • FAQ: My Signal Chain, ...
Discord: discord.gg/dzrFMzD
Facebook: LowEndLobster
Twitter: @LowEndLobster
Instagram: LowEndLobster
Reverb Shop: reverb.com/shop/lowendlobster
Пікірлер: 491
I LOVE IT. Red bass with black guard, black hardware, and a maple board is badass. That Ray is kinda like a muscle car, but in bass form.
@LowEndLobster
3 жыл бұрын
Thank you Landroid!
@DevilsFourString
3 жыл бұрын
@@LowEndLobster Should also say that I'm loving the tonal variety! Before your stingray mod series and now, I'd never heard EMG MM style pickups. Like them quite a bit.
@alfredoforteza8259
2 жыл бұрын
Were we can buy all that black Hardware and pickguard ?
I appreciate that he said the craziest mod "yet"...nice keeping that future options open
@LowEndLobster
3 жыл бұрын
;)
@russellzauner
3 жыл бұрын
@@LowEndLobster Plot Twist: LEL finds a rare and pristine Ray husk that has nothing but the neck and body and upgrades the body and neck
I love the sound of a bridge pickup with the tone rolled off.... you get all of the punch without the nasal sound you get from some bridge pickups.
@LowEndLobster
3 жыл бұрын
Thanks Chris! Indeed, that's a great tone
That bass sounds great. I think this is the best stingray mod you've ever done.
@LowEndLobster
3 жыл бұрын
Thanks Daniel! I agree, very happy with how this came out
What a versatile sounding bass-great for the studio. Great aesthetics too!
@LowEndLobster
3 жыл бұрын
Thanks Barry!
OMG! That bass sounds amazing. I think it could cut through the mix anywhere. That neck pickup sounds like it would kill on "Roundabout." Break out the pick. I have not used EMG pickups in any of the basses I've built or modified, but this bass has made me a believer. Really nice upgrades all around Lobster! Killer!!
@LowEndLobster
3 жыл бұрын
Thanks Chris!
Love it! I really enjoy the Code Red name. The bass sounds amazing and extremely versatile. Keep Grooving bro!
@LowEndLobster
2 жыл бұрын
Thanks Norb!
Now that's one HUGE sounding BEAST. Great mod.
@LowEndLobster
3 жыл бұрын
Thank you :)
You are the coolest cat in bass modifying, Lobster!!! Always a pleasure to watch and listen to what you are up to again!!!
Dang, that bass sounds Great!!! Well done my friend:) Love your videos 👍🏻
@LowEndLobster
2 жыл бұрын
Thank you Ray!
As usual LowEndLobster, nice modifications. It's great that all of the electronics are plug and play without any soldering connections. I was on the fence about buying a Sterling Stingray 4 Sub. However, with plug and play options, I'm all in now!
@LowEndLobster
3 жыл бұрын
Suhweet! EMG really makes awesome stuff, especially for folks who don't want to or don't have the equipment to solder. It's definitely engaging in a whole new dimension with the plug and play aspect.
@blowfly3000
3 жыл бұрын
@@LowEndLobster I'm waiting for the Sterling by Music Man StingRay 4 Roasted Maple Neck Bass Natural to go on sale again & I'm pulling the trigger. Thanks for all of your insight brother!
Wow. Great sound. Very even sounding. Nice job lobster.
@LowEndLobster
3 жыл бұрын
Thanks Rich!
As always.... great, great MOD Lobster!! Congratulations
Once again EMG saved the day! Thanks for this video LowEndLobster!!!
@LowEndLobster
3 жыл бұрын
:) You're welcome Guy!
The crisp of the pickup is sound so good, and I love how the bass is more growler than before.
@LowEndLobster
3 жыл бұрын
Thank you Mark! :)
I’m a simple man I like red on Basses. So this Bass’s Aesthetics make me happy : )
@LowEndLobster
3 жыл бұрын
Thanks Spider :) I like how this came out too.
I would have gone with alternating black and candy-apple red as my nail polish colors, but you do you. XD
@LowEndLobster
3 жыл бұрын
LMAO!
Finally EMG MMTW! Thank you so much! And damn, that bridge PU in single coil mode blows my mind
@LowEndLobster
3 жыл бұрын
Thanks AK! Really happy with these pickups in this application, end result makes me very happy!
Wooooow what a Great Sound , with EMG ! Thanks a very good Review ..👏👏👏
Great great bass you've got dude! Badass in tones and aesthetics!
@LowEndLobster
3 жыл бұрын
Thank you! Very happy with the end result :)
Absolutely love the mods done on this bass,EMG’s are an excellent choice for all the electronics.Ma Makes me want to go out and buy this bass,Great Job 👍👍👍
@LowEndLobster
3 жыл бұрын
Thanks NJT!
Is bassgazm a word? It should be! The sound... that's a huge number of tone combinations. Killer. You could almost imagine Marlon Brando in Apocalypse Now... "The color... the color!" :D If only they made matching headstocks.
@LowEndLobster
3 жыл бұрын
Thank you Breakit!
Sick bass! Love the color combo.
@LowEndLobster
3 жыл бұрын
Thanks A!
Killer! I love the black hardware and it sounds amazing! I would definitely buy a Lobster Custom Shop bass!
@LowEndLobster
3 жыл бұрын
Thanks Dustin :)
Damn! Sounds like a really modern Sabre Bass! You did amazing! Congrats!
@LowEndLobster
3 жыл бұрын
Thanks Jacob!
That is one awesome sounding machine. Lordy and looks fantastic.
@LowEndLobster
3 жыл бұрын
Thanks Don!
Great video to be listening to while shopping for a stingray. Makes it easier to stay focused.
@LowEndLobster
3 жыл бұрын
Thank you :)
Fantastic job sounds incredible!
@LowEndLobster
3 жыл бұрын
Thanks Scott!
Nice!. I had the same "adult lego" glimpse with my EMG installation experience as well. What I would recommend is to mod the bass for 18v. I had to route a bigger cavity on my bass to fit a double battery housing. Took the risk but the Darkglass preamp I choose for my install really shines with the extra voltage headroom, specially since that bass is tuned with a Low B. Thanks for the video, great as always!.
@LowEndLobster
3 жыл бұрын
Thanks Pancho! I actually bought a double battery box just for what you suggested, but ended up sticking with the 9v. Stay tuned though, this upcoming wednesday we have a similar mod coming but with a Sire M2... and we keep the 18v!
Definitely Snazzy Lookin'!👀😘 From the "piano wire ping"✨to the rich warm tones🔥the CLARITY is exceptional!🎶🎶🎶 Great Work Lobbie!💯
@LowEndLobster
3 жыл бұрын
Thank you Jason!
@jasonbenford3427
3 жыл бұрын
@@LowEndLobster Absolutely My Man!✊🏿 You definitely could do custom work for a living my friend.💯🎯 That is No Smoke! No Bull💩!! I would trust you my beloved basses!👍🏿
Dude, that sounds GREAT!
@LowEndLobster
3 жыл бұрын
Thank you!
Sounds wonderful! Awesome!!
@LowEndLobster
2 жыл бұрын
Thank you!
.....damn, this is amazing! I really dig the tone. I was wondering what this could sound like, and it seems it was worth the wait. 5 claws out of 5.
@LowEndLobster
3 жыл бұрын
Thank you! I am super happy with the end result, looks just like I imagined and sounds even better.
I just got a Ray 34 single H in the firemist silver. I love this bass. I am going to mod it with a white capped EMG MMCS Pickup and a EMG J. I'm going to route a spot for the J pickup. I think it will sound awesome! and look cool :)
@LowEndLobster
3 жыл бұрын
Awesome! That sounds like a killer mod! Let me know how it turns out :)
Damn that sounds awesome and the black hardware and pg looks as good as it sounds
@LowEndLobster
3 жыл бұрын
Thanks Jason!
That bass is gorgeous!! Putting EMGs in a "cheap" bass makes it three times more reliable and versatile, I find. They're completely noiseless, so not worrying about the quality of the signal and being able to just focus on dialing a tone that you like is a total luxury, in my humble opinion. I own a mexican jazz bass with JAX pickups and I'm really struggling to find reasons to buy another bass...until I watched this video 🤣🤣 Great content!! Thanks!
@LowEndLobster
3 жыл бұрын
Thank you Adrian! Indeed, EMG is one of the best avenues to improving an instrument electronically and the solderless design makes it even easier :)
@adriancorralero5239
3 жыл бұрын
@@LowEndLobster I agree, they get a lot of hate from vintage tone geeks, but I bet half of them would change their mind if they just tried EMGs with old strings 🤣🤣 Again, beautiful bass and keep the good content up!!
Oh that sounds killer! I only have a single buck Ray but I love the tone control. Im gonna have to get a set.
@LowEndLobster
3 жыл бұрын
Thanks Mitchell! Honestly, the two band with separate tone control has been one of my favorite electronics combos as of late. I'm going to be making a video on that setup that I have on a few basses and demonstrate the advantages of this setup, and demonstrate how the treble cut on an active preamp and the tone control impact the tone very differently :)
@Brotesque89
3 жыл бұрын
@@LowEndLobster I had another idea for Project Code Red. Maybe do a fret dress and document that process? I'm planning on doing that to my Ray34. Got some fret buzz that is only fixed with high action that affects my intonation.
Truly insane! I love it.
@LowEndLobster
3 жыл бұрын
Thanks Sam!
That Red Lobster bass you got there sounds sweet! It looks like they have those pickups in the 5 string variety as well. Hmm...
@LowEndLobster
3 жыл бұрын
Indeed, though the shape would require a different pickguard for the 5'ers as it's USA 5 string shaped vs the SUB, which has the little 'nubbins' at the top and bottom of the pickup. The Aguiar AG5M is a replacement for those however, but are hardwired in parallel
Congratulations Low End Lobster This is The Fattest Sounding Stingray And Quite in All Settings Another Winner Indeed Bravo 😎👍
@LowEndLobster
3 жыл бұрын
Thanks Darrell!
Very cool look and sound!
@LowEndLobster
3 жыл бұрын
Thanks Marks5s!
Sounds like a good recording bass! Thanks.
@LowEndLobster
3 жыл бұрын
Thank you!
Awesome engineering, dude🎸
That sounds fantastic!!!!! Thank you!
@LowEndLobster
Жыл бұрын
Glad you liked it! This was a very fun project.
EMGs sound great! Usually I'd prefer Stingray pups that have slugs showing, but the EMG style works great on this one with the black hardware.
@LowEndLobster
3 жыл бұрын
Thanks! Indeed, was going for a much less traditional look/sound here and I think we succeeded :)
OK wow! This is cool as shiz! I've been modding those old OLP five strings for a few years. since around 2006 probably. - I was into Jaco Pastorious, Tony Levin, Geddy Lee and Flea. So I was stripping those OLP fives down to fretless and then doing epoxy/superglue fingerboards. (I did five OLP Vs, 1 Squier 4, 1 MM copy 6 conversion, and 1 Ibanez Roadstar II V in fretles Jaco Epoxy) ... anyway, I've got a load of them!!! - I guess I should do a few KZread videos and show them off. lol
I dig it a lot too! Nice bass!
@LowEndLobster
3 жыл бұрын
Thanks Budd!
Very very instructive and interesting !! Thanks a lot !
@LowEndLobster
3 жыл бұрын
:)
I love it! The only thing I would like you to try is adding the chrome control plate back but keep the black knobs. I think that would give a cool contrast.
@LowEndLobster
3 жыл бұрын
That's a cool idea! Thank you :)
Never was a EMG bass pickup guy; love their guitar pickups, tho. But the MM’s sounds great! The black and red combo looks ‘rad!’ Would I do mine like that? I probably would! I wonder how it would sound with a rosewood fingerboard? Hmm.🤔 Lobster, you did great! You definitely put that HH on steroids!😌🎶👍🏾
@LowEndLobster
3 жыл бұрын
Thank you! :)
This configuration is starting to sound *very* attractive to me. I mostly favour a Fender Jazz, and but my other bass is MM+P. Neither quite do what the other bass does, but THIS cherry-red darling here might just cover both of my main axes.
@LowEndLobster
3 жыл бұрын
Thank you! I'm super stoked with how this project came out as well. This bass and the EMG M2 are headed over to Bully's house for some much needed abus.... uhh... playing ;P. I have a short comparison video dropping soon that features both Code Red and the EMG M2 (EM2G?). The Double TW config is just so mighty!
This bass looks and sounds great.
@LowEndLobster
3 жыл бұрын
Thanks Rick!
What you said about the neck pickup in single coil mode having a P Bass feel to it is right on. I would add that it has a P Bass feel with that classic Stingray sizzle, us Stingray-Heads know and love. 😎 I like the look of the black hardware against both the red body and pale maple neck. Nice job Lobster!! Edit: Both pickups in humbucker mode has a really nice, full tone.
@LowEndLobster
3 жыл бұрын
Thank you Kevin!
Dude this bass looks so freaking good I cant get over it. You're mod sting rats made me decide to pick up a 5 string single humbucker trans satin blue. I gotta get some black hardware too. Looks so epic. ❤❤❤😊
@LowEndLobster
10 ай бұрын
Thank you! This was one of my favorites
I'm really surprised how nicely this turned out! Normally I wouldn't consider EMG, I don't associate it with what I like. But these pickups sound awesome here! And the control layout is very smart, easy to operate and very flexible. It can even sound pretty close to the Sabre Classic like this! 5 claws out of 5!
Hey! I did one called the “Rotten Apple” of this same bass! I put in Real Ernie Ball Stingray pickups, MojoTone Preamp and Hipshot Bridge. Then I Reconditioned fretboard, fret level and shaved the neck a bit.
@LowEndLobster
2 жыл бұрын
Hell yeah! That sounds awesome! Would love to see pics. Join our discord channel (linked in the video description)
Salutations crustaceans this neck is so clear. I need more dark colors in this master piece
I am totally wowed!
Really cool. Glad they don’t offer this as a special configuration- I could end up owning yet another bass. The emgs sound really good.
My six string conversion was originally a Jay Turser MusicMan Five string. I had bought two of them; one red one, and one blue one. Oddly enough, the JayTursers were in a standard Fender or Musicman string spacing, as opposed to the OLP, SUB, Sterling, or most other Musicman copies. ... but, I liked the skinnier OLP for the fretless, since I had been used to a Fernandez Gravity V ... So I plugged and re-drilled the head-stocks on the Jay Tursers, making the red one a fretless six string, and the blue one a ten string octave monster.
Great job Lobster.
man…that thing sounds great! 🤩
That’s probably your best sounding modded bass ever!!
Very cool looking mods--the bass looks killer now. That all black hardware with red body and maple neck is YUMMY! Probably going to get slammed... but I've gotta say I'm not thrilled with the EMGs (although it has grown on me after listening through a few times). I've have several basses with EMGs, and I think they are engineered very well and the quality is top notch. Also, EMG makes it really, really easy to install their electronics. I don't know what it is, but of all the basses I've had with EMGs, I've only been completely happy with one specific bass (that was an Ibanez Doug Wimbish 4-string model). The rest, including a Spector I had, I've not been thrilled with. I'd probably not be so turned off by the sound here if I didn't know the bass started life as a "Stingray." The EMGs seem to lose almost all that character. With all the mods you did, I wonder how it would sound with the addition of an EXB control, rather than the 2-band, to give a sharper slap sound? I wonder if it would give that glassy, super-clean, scooped Henrik Linder tone. I love the sound he gets for slap from his bass. Too bad the bass he uses costs like... $10,000!
Nice, I hope to get one of those EMG's for my bass.
@LowEndLobster
3 жыл бұрын
Thanks Hissori! They are quite nice :)
I really dig this!! Second to the mintoray though. That sucker is clawsome.
@LowEndLobster
3 жыл бұрын
Thanks Wes! Indeed Minty was a strong first mod project, definitely going to be hard to beat that one!
Aesthetically, I preferred the white and chrome furnishings. Tone wise: nice... but way more than I’d ever need!
@LowEndLobster
3 жыл бұрын
Thanks Rev! Indeed, this is the kind of bass that you take into the fallout shelter with you so you don't need to ration your bass tones ;P
Amazing, Finally I found what I need for my Harley Benton five string...
Cool project, nice outcome I've got some emg45 TW pickups for a six string build I'll be getting going on down the road, I have some EMG 35 DC just getting underway with and I have a EMG mmcs five string so it's got the ceramic steel pickups so much mellower than what you have with the twos I was actually hoping it was a cstw so it can be split have that mellow or tone that could then go to a single coil sound but still mellowed by the ceramic steel variation got a few different preamp options from EMG I absolutely love their wiring stuff when they first came out I thought they had a few issues they need to address and they seem to really pay attention and pay close attention to what their customer said because everything that came together by that group of early solderless wiring and preamp customers that that system should be adopted by every maker of pickups and preamps and parts and it just universalize that and then make improvements from there but it's I've been using those sets all along as a default standard gear on my builds and unless the customer specify something else and I've never had a single one come back for even just checking them out. Had a couple of it builds after about 12 years that I had a good customer calling about scratchy crackling sounds and obviously we know that's just a dirty pot a little deoxid spray turn the knob up and down up and down up and down about 8 seconds later that was gone and it's just such well built stuff and they have such a wide variety of product for guitar and bass active and passive such a wide variety of tones with in so many of the products and ability to easily get from One tone to the next to the next to the next and background and if you know where they are on on your controls you're there and the best part about working with EMG products, 100% honestly and I am not paid by them I'm not sponsored nothing although I'd be willing to listen to conversation absolute best part about working with EMG products is that you're also 100% working with the EMG people. And whether you're a customer working on your first mod or replacing something that went bad or you're an experienced tech or like me you've been building high-end custom instruments with other people's names on them for about a quarter century and you are now going to be offering these same and other custom and semi custom builds as well as a huge variety of aftermarket and replacement parts add-ons customization parts in more materials than I could ever possibly list here EMG people are the second to none. And all of my experiences they were the best customer service and technical support people have had the pleasure to work with when I was coupling one of their competitors pickups with their control system the builder of the pickups, a very popular very successful builder that we all know, basically through their hands up and said you're putting it with that stuff we have no idea you're on your own bud and that was the limit of their help I wasn't looking for them to walk me through it just maybe point out some things to look forward I'm fairly capable they wouldn't even do the bare minimum of hey make sure you got the bridge ground connected nothing and we're very nice about refusing to help they're only offer of a solution was to use the wiring and the pots that came with those pickups my customer wanted EMG with their pickups I'm going to give my customer what they want unless it's going to set their guitar on fire I'm going to get my customer and not only did EMG listen to my situation they walked me through the full install even though I didn't need it they wanted to and they walk me through a very thorough extensive testing to make sure everything was connected correctly everything was functioning correctly everything was full dynamic and tonal range and we actually found an issue and found that it couldn't be immediately corrected because of just a design quirk between the way they do things and the way their competitor does things and as of 3 years ago that is no longer a problem they changed they adapted as soon as they learned of the issue they they immediately implemented a change order in their process and began rapidly retrofitting there on the shelf stock. Yeah, the EMG people know what they're doing, they are way more than a fucking 8185 set for metal guitar. It's a nice pick up set, it's just a pickup set that and they offer so many more widely very sex options and I'm not a person who likes to choose limit variety I got to get back to work and I'm yammering here but I really look forward to possibly working with some of the community here on builds on utilizing some of the aftermarket proprietary stuff that we are bringing to market because this is a passion of mine and I can't stop doing this stuff and building this stuff so I might as well see if someone wants to buy it and people have been buying it for 25 years so the company is Chiron MusicWorks LLC we are a United States based company we are everything in house in our shop we sustainably source right now about 88% of our existing inventory is sustainably sourced and 10% of every dollar we make we provide to one of four charitable endeavors all this stuff will be on our website or KZread channel which should be up and running in the next I'll just say it it will be the website and KZread channel and then Facebook page and Instagram those will all be up and running very soon and I can't wait to meet some of you and work with some of you and build some bases and guitars and people's dreams because that's one of the things that makes me happy to give some money instrument they have been dreaming of my goal is to be selling a lot of $16,000 guitars and bases but just not selling them for $16,000 everything is handmade American so there's a price to it but I don't want to sell stuff for that price so all right got to get back to work thank you for those that are still reading and for those that are going to decide to look out for us and then look us up maybe work with us I can't wait we're not just about the the instruments looking for you
@LowEndLobster
3 жыл бұрын
Yo Metalbass! Great comment, yeah man EMG's quality definitely goes beyond the electronics- excellent staff and team over there!
I'm currently working on a stingray. It has a pbass neck pickup which you can blend in with the bridge pickup using a blend knob, it has a 3 band eq with a midrange frequency shift switch, it has a coil tap switch for the humbucker and a switch to change the bass from off to 9v to 18v. I absolutely love it, it sounds like a beast
Once again, an incredibly useful watch and learn, he said, feeling a little more aware and so reaching for his wallet!
WOW! Great Job! That Thing is a BEAST! When I grow Up, I'm gonna be Just like You LOL! @LowEndLobster
@LowEndLobster
3 жыл бұрын
Thanks George XD
Geez, everything sounds great on that MM. Talk about Versatility. The swiss army knife of basses..
@LowEndLobster
3 жыл бұрын
Thank you! I really love how this project turned out. I lent this to Bully, hopefully we'll see a vid on it soon!
That Ray for will look even hotter if you stain the Fretboard, Neck and headstock (diff shades of course) . I’m thinking of doing it on mine as well as upgrading the parts
@LowEndLobster
3 жыл бұрын
Great idea! I was thinking about that. Honestly, you'd need to sand it first and then spray it down and then satin/gloss over it. It'd be a LOT of work. Painted stain won't go on evenly on an application like this.
@acsaiyanbalce4610
3 жыл бұрын
@@LowEndLobster I myself am a Lefty. I would have to get 3 trebles and 1 bass tuner Correct? Did you paint the pre-amp black? Black looks so nice on the Sub 4!! As for staining, i’ll prob rub it on with cloth. Davie504’s Musicman is the color i like to achieve!! Might be trial and error!!
Great as always dude!! That bass sounds incredible now. I had a mini panic attack because I couldn't find the BFR bongo but it's hiding behind the bass playin crustacean.
@LowEndLobster
3 жыл бұрын
Hehehe, I gotta make another vid on that Bongo. It's a cool bass but it's not without its flaws.
@bassyboii
3 жыл бұрын
@@LowEndLobster man I hate to hear that! My only complaint on my bongo is the preamp is too hot for its own good. I get these horrible transient pops from time to time when I slap. I used to think it was the string hitting the pickup pole, did a slowmo video and didn't see it making contact.. it's just the preamp overloading and popping. I really want to throw a bqc in mine.
As always the operation was a success.The allBridge is very interesting.
@LowEndLobster
3 жыл бұрын
Thanks Kev! Yeah I really dig these bridges. Love em on my Sires and on this project. We have another project coming with an Albridge soon! :)
Always enjoy the stingray videos
@LowEndLobster
3 жыл бұрын
Thank you :)
LOVE IT!!!
Great video! I have this bass and am thinking about doing some mods.
This was a great mod vid. Lobster 🦞 makes me want a stingray so bad. I’ve been a jazz man my whole life.
@LowEndLobster
3 жыл бұрын
Thank you Twig :)
@strannikr9497
2 жыл бұрын
Jazz still best option.
You answered my question about which replacement bridge I should swap into my SUB ray4. Awesome transformation, these “low-end” music man clones are really well-made, seems like the hardware is the part where they saved the most money because the wood/finish/neck are pretty nice.
@LowEndLobster
3 жыл бұрын
Glad I could help and you're right!
Thank you so much for this. I think I know what my next bass is going to be. I am so much for versatility (let alone my absolute requirement for a 38mm nut), this bass with this particular pickup/preamp upgrade got definitely at the top of my "next-up" list.
@LowEndLobster
3 жыл бұрын
Thanks Marios :)
Just bought a Stingray SUB 5 H on sale for $300 bucks and am thinking I will do the 5 string equivalent of this mod. I needed a bass for recording music (mostly metal) and really liked the Stingrays. I think this will allow me to spend another 300 bucks or so to really get the most out of what seems like a great platform bass. What is nice is that I do not have to do it all at once to make it worth it. It is a really solid bass for its price!
Dig it Low End🦞 🤘
@LowEndLobster
3 жыл бұрын
Thanks Nuggs!
Another great modding vidéo. I don’t know if you know the Haussel Triplebucker pickups but it could make a great modding video (there is only one video for this pickup...). I just bought 2 of them to mod my stingray HH (with tone capsule preamp) but it’s not finish yet.
@LowEndLobster
3 жыл бұрын
Now we're talking! Great suggestion, thank you!
Emg's make a huge difference! Although, EMG DOES NOT recommend doing what you've done here with the 3 position selector switch. Regardless, you seemed to have pulled it off with outstanding results!
Real good 👍🏻
@LowEndLobster
3 жыл бұрын
Thanks dude!
Wow, that was fast!!!
@LowEndLobster
3 жыл бұрын
Hehe the videos were shot farther apart. Most videos you see are a few weeks to a couple months old when they're released with only certain ones cutting in line (if they're for something brand new or if it's something that I think would get a lot of subs or views).
Wow it sounds effen bad ass man!!!!! Sooo jelly!!!
@LowEndLobster
3 жыл бұрын
Thank you!
Indeed a great job
@LowEndLobster
2 жыл бұрын
Thank you!
Man, dual humbucker sting rays just sound "chef kiss"
Impressive!
@LowEndLobster
3 жыл бұрын
Thanks Dwarde!
Bought the same bass in olive and switched out the pups and preamp in this configuration. And WOW it sounds MASSIVE.
@LowEndLobster
2 жыл бұрын
Sweet! What'd you swap in?
@PhatPhrank
2 жыл бұрын
@@LowEndLobster Same electronics as the Code Red. Very very happy with it.
@LowEndLobster
2 жыл бұрын
@@PhatPhrank Awesome! So glad you're enjoying the setup
@bassomatic6055
Жыл бұрын
I'm attempting the same mod, but can't figure out how to get the Pickup connector cable with the 3 connectors through the small channel to the cavity. Not sure how you pulled that off without drilling a bigger whole or cutting the cable and re-soldering the six wires.
@LowEndLobster
Жыл бұрын
You use the Tele switch instead of the little module. The Tele switch acts as a signal and power hub
I have a Ray5 in surf green ( I know it's mint, but I like surf instrumental so I call it surf green), anyway I ended up replacing the bridge saddles with ones I made (the stock ones were crap, I had to use 3 different hex keys to adjust the pu height.) And I made a pickguard out of mother-of-pearl material (for that surf aesthetic) I also dumped all the pots in favor of a SPDT on-off toggle. The stock ceramic pu really bites when run with no preamp or pots, but it was missing something. I have some EMG pu hanging around and been considering modding the bass to a bridge/humbucker-neck/single coil configuration. It's a no cost mod to me as I already have all the stuff. I was just hesitant to do all that work if it would sound like crap when I was done. The Ray5 is the single pu model and I would have to route the body for the bridge pu. However, after listening to your in depth review of the modded Ray4, I'm confident I will get the sound I want and it will be worth the effort. The best part is, the mod is reversible as the pick guard for the single Ray5 will cover any bridge hole I route into the body and the EMG humbucker will fit in the existing route for the stock Ray5 pickup. Thanks for the inspiration. 8)
@LowEndLobster
3 жыл бұрын
Hell yeah! That sounds awesome!
The EMG S and changes made a Big difference compared to the stock one I played , you had done the 5 string version. I had mentioned the 4 string version that for the price it is a good bass for many genre's , if cost is a factor , but what u have done is Fab. Cosmetically I would like the White pickguatd , chrome plate outside of that super sweet. For me money is tight due to health issues other wise it would be another bass in my collection
The Black hardware is very cool !!
@LowEndLobster
3 жыл бұрын
Thank you Ernie!
Soy guitarrista y creo que mi instrumento favorito es el bajo, Suena increíble!!
@LowEndLobster
3 жыл бұрын
Gracias Vicente!
I find the EMG MMHZ pickups to be best sounding Music Man pickups period.
@LowEndLobster
3 жыл бұрын
Indeed, the MMHZ is a killer pickup! Was one of my faves from the Stingray mod guide
Oof! That's a tone beast!
@LowEndLobster
3 жыл бұрын
Thank you :)
Nice to see you're representing GN. 👍
@LowEndLobster
3 жыл бұрын
Steve is the man! He's one of my biggest youtube influences when it comes to integrity and presentation
@InderjeetSingh-im3eh
3 жыл бұрын
@@LowEndLobster It's also why I like the channel. Plus their unwavering focus on the end user.
@LowEndLobster
3 жыл бұрын
@@InderjeetSingh-im3eh Definitely! Even though PC parts are a lot more black and white in terms of their performance, I try to embody what he does and focus on the customer experience vs providing lip service for a manufacturer