Take a look at how EASY it is to program your garage door opener to your vehicle (If equipped). Thanks Michael for the demo! www.glenbrookdodgechryslerjeep.com
Жүктеу.....
Пікірлер: 49
@norman_sr2 жыл бұрын
This literally took 10 seconds to do. Awesome video.
@d.c.32202 жыл бұрын
It may not be that easy. After syncing the remote to the button you want to use, you may have to hit the "learn button" on the motor hanging down from your garage ceiling. Click on the learn button, you then have 30 seconds to go back to your car and hit the button you programmed. The light on your motor should blink. Then confirm it works.
@victorhackbarth
Жыл бұрын
I had to do the same extra step by hitting the learn button on the motor too for it to work.
@matthewmoorehead1979
Жыл бұрын
This 👍
@Eaero
Жыл бұрын
Thank you! This is what actually worked for me
@123supadave123
11 ай бұрын
Perfect 💯💯💯
@MrHereWeGoYo
10 ай бұрын
Yep. The initial steps in the video plus this got it done. I believe it has something to do with whether or not your garage uses a rolling code.
@wheredango11 ай бұрын
I had to do this process after putting the wall mount for controller in learn mode, but it worked. thank you
@TheRobstr5 ай бұрын
Worked on my 2023 Durango thanks man 👍
@MarvinPhipps3 ай бұрын
Wow I've had my dodge ram since 2019 and never knew how to program the remote this video showed my how thanks
@stephenshelpman23186 ай бұрын
This worked perfect on my 2019 2500. Thank you!
@bradleysnyder6540 Жыл бұрын
Awesome. Worked for me. 2022 Ram 2500
@100peopledislikedyourcomme610 ай бұрын
For genie garage door openers, in addition to these steps you will also need to click and hold the prgm button on the garage door opener. Hold until the light turns on then go to your truck and click the button you want to program 3 times, hold each time for one second.
@Rednawp
6 ай бұрын
I did this but mine didnt work. Does the truck need to be on? The light blinks rapidly when i do this but it still doesn’t work
@100peopledislikedyourcomme6
6 ай бұрын
@@Rednawp yes the truck should be on
@sethradford9234
5 ай бұрын
Worked
@TheMarchetti3 ай бұрын
Worked for me (Durango 2015) thanks
@davidm.6643 Жыл бұрын
Thank you! Worked great. 🇱🇷
@joeb4275 Жыл бұрын
Good video, thank-you.
@ericlarge6960 Жыл бұрын
It worked for me !
@dicer00759 ай бұрын
Thank you very much!
@bigrudy68nyr58 Жыл бұрын
Thank You!
@marissaacosta4668 Жыл бұрын
Do you have to be close to the motor to program the opener to the truck
@YOURBOYJAIME Жыл бұрын
Thanks 👍🏽
@cesar2146 Жыл бұрын
Thank you
@Vedo729ify Жыл бұрын
Thx!!👍👍👍✌
@RaiderNationPodcast5 ай бұрын
What if I have no remote? I have 2009 Chamberlain door opener with no remote, and 2015 Chrysler 300
@davemc1622 жыл бұрын
Thank you so much. Works great. 🏄♂️
@strom8811 ай бұрын
Worked flawlessly on a Stanley analog remote
@Rockinthehill Жыл бұрын
this didnt work in my new 2022 Ram Bighorn the visor buttons just quit blinking then only a slow yellow color
@Mr_Clips012
11 ай бұрын
Yeah, it’s learn button only for gates,
@edwizard629 ай бұрын
So you have to erase all first? What if you just want to reprogram the first button only? Someone might have the other 2 buttons programmed for other locations.
@grheryford
2 ай бұрын
Same for me. I just need program a gate code but not remove my already programmed garage door buttons
@CharlesFunk46 ай бұрын
Well crap my garage door opener handheld needs a new battery 😢
@evagibson70342 жыл бұрын
Omg that was too easy.. I’ll try it and come back to let you know if it worked 😆
@DominationPlays
Жыл бұрын
Did it work?
@ohk_jonathan
Жыл бұрын
@@DominationPlays he accidentally fell down the ladder he used to push the motor button and broke his neck, sorry for the bad news
@angelcakes1212
Жыл бұрын
@@ohk_jonathanmy my my! Healing Sent 🙏🥹🙏🙏🆙
@Mr_Clips01211 ай бұрын
Who was pressing the learn button when you tried to program it to your uni-ram button 😂😂 seems crazy it won’t work for me for anything, I’ve tried multiple products and different product opener fobs, nothing..
Пікірлер: 49
This literally took 10 seconds to do. Awesome video.
It may not be that easy. After syncing the remote to the button you want to use, you may have to hit the "learn button" on the motor hanging down from your garage ceiling. Click on the learn button, you then have 30 seconds to go back to your car and hit the button you programmed. The light on your motor should blink. Then confirm it works.
@victorhackbarth
Жыл бұрын
I had to do the same extra step by hitting the learn button on the motor too for it to work.
@matthewmoorehead1979
Жыл бұрын
This 👍
@Eaero
Жыл бұрын
Thank you! This is what actually worked for me
@123supadave123
11 ай бұрын
Perfect 💯💯💯
@MrHereWeGoYo
10 ай бұрын
Yep. The initial steps in the video plus this got it done. I believe it has something to do with whether or not your garage uses a rolling code.
I had to do this process after putting the wall mount for controller in learn mode, but it worked. thank you
Worked on my 2023 Durango thanks man 👍
Wow I've had my dodge ram since 2019 and never knew how to program the remote this video showed my how thanks
This worked perfect on my 2019 2500. Thank you!
Awesome. Worked for me. 2022 Ram 2500
For genie garage door openers, in addition to these steps you will also need to click and hold the prgm button on the garage door opener. Hold until the light turns on then go to your truck and click the button you want to program 3 times, hold each time for one second.
@Rednawp
6 ай бұрын
I did this but mine didnt work. Does the truck need to be on? The light blinks rapidly when i do this but it still doesn’t work
@100peopledislikedyourcomme6
6 ай бұрын
@@Rednawp yes the truck should be on
@sethradford9234
5 ай бұрын
Worked
Worked for me (Durango 2015) thanks
Thank you! Worked great. 🇱🇷
Good video, thank-you.
It worked for me !
Thank you very much!
Thank You!
Do you have to be close to the motor to program the opener to the truck
Thanks 👍🏽
Thank you
Thx!!👍👍👍✌
What if I have no remote? I have 2009 Chamberlain door opener with no remote, and 2015 Chrysler 300
Thank you so much. Works great. 🏄♂️
Worked flawlessly on a Stanley analog remote
this didnt work in my new 2022 Ram Bighorn the visor buttons just quit blinking then only a slow yellow color
@Mr_Clips012
11 ай бұрын
Yeah, it’s learn button only for gates,
So you have to erase all first? What if you just want to reprogram the first button only? Someone might have the other 2 buttons programmed for other locations.
@grheryford
2 ай бұрын
Same for me. I just need program a gate code but not remove my already programmed garage door buttons
Well crap my garage door opener handheld needs a new battery 😢
Omg that was too easy.. I’ll try it and come back to let you know if it worked 😆
@DominationPlays
Жыл бұрын
Did it work?
@ohk_jonathan
Жыл бұрын
@@DominationPlays he accidentally fell down the ladder he used to push the motor button and broke his neck, sorry for the bad news
@angelcakes1212
Жыл бұрын
@@ohk_jonathanmy my my! Healing Sent 🙏🥹🙏🙏🆙
Who was pressing the learn button when you tried to program it to your uni-ram button 😂😂 seems crazy it won’t work for me for anything, I’ve tried multiple products and different product opener fobs, nothing..
Well to my surprise that didn’t work.
Didn’t work on my 2018 pw
Doesn't work
Doesnt work
This helped zero for my ram
doesn't work. but nice try