Hi,I’m trying to swap my European keyless start 2012 C-Max BCM (same as Kuga/Escape mk2 and Focus mk3) i would like to know what is the procedure and the tools i need to pair my two keys to the new BCM? Regards.
@tonytopbatz2 жыл бұрын
Nice job
@Julicauto Жыл бұрын
Oh I got you. So the Autel works with newer Ford like 2020?
@Alex-si5mq4 ай бұрын
Is it the same with it not being able to turn on ignition
@derprofessor84 Жыл бұрын
And the Pats? Please make a Video :) I have replace the BCM for my Ford Fiesta 02/2013, keyless entry BCM programming is okay, the Pats programming 🧐🧐🧐
@kcp629 Жыл бұрын
Is windows 10 and 11 capable with fjds.
@brettdore26352 жыл бұрын
Replaced a 2012 ford focus BCM that had corrosion on pins. Replaced it with another 2012 ford focus BCM. What needs to be changed on the new BCM? No key is detected now. Any help be appreciated. Also will forscan reprogram this? Thanks in advance.
@huyug1
2 жыл бұрын
You will need to perform PMI(Programable Module Installation) using FJDS/IDS which usually does online programming as well as As Built data. Than minimum 2 keys needs to be programmed to new BCM. After, perform Parameter reset. At that point car should be able to start. All TPMS sensors also might have to relearned.
@brettdore2635
2 жыл бұрын
@@huyug1 Thank you for information. I looked up the as built data. Both BCM are the same data entered in the fields. So how does the BCM and PATS system work together? If for some reason the new BCM don't work once PATS is programed with the old BCM reinstalled work with no further programing? The old one is currently working just having issues with horn going off and key fob not working correctly from the corrosion on some of the pins on the BCM.
@bb-sq7gq2 жыл бұрын
Are you in California, if you are in ca I need your help with a 2015 ford
@Julicauto Жыл бұрын
Why did you finish with Autel IM608? You couldn't do the parameter reset with FJDS?
@TradeDiagnostics
Жыл бұрын
He did say in the video that he used the IM608 because he didn’t have access to the Ford security codes. The IM608 just by passes the need for a code.
@billbabbs3871 Жыл бұрын
Thanks for the great content very helpful, but the back ground music was very distracting almost drowning out your dialogue. thx again
@AhmedAli-hu8ng2 жыл бұрын
Boss can we Program all the module with j2534 like specially when I have to change the transmission can we put solenoid data with this or need vcm2
@huyug1
2 жыл бұрын
kzread.info/dash/bejne/i4WdwZetZJvcZdY.html
@viridian6903
2 жыл бұрын
Does the fllow data are inportant to write when we make upgrade firmware of tcm
@Julicauto Жыл бұрын
Hi. Can you do parameter reset o 2018+ Ford 150 with im608 pro? Regards.
@rickymesa
Жыл бұрын
I don't think so because it asks for codes..
@tomdenson8366
Жыл бұрын
Tfain
@555666jyd2 жыл бұрын
I respect your repair video thank you but you really confuse me with that what you work on when you say Waco what the hell man just say car 🚗
Пікірлер: 21
great fix brother
Hi,I’m trying to swap my European keyless start 2012 C-Max BCM (same as Kuga/Escape mk2 and Focus mk3) i would like to know what is the procedure and the tools i need to pair my two keys to the new BCM? Regards.
Nice job
Oh I got you. So the Autel works with newer Ford like 2020?
Is it the same with it not being able to turn on ignition
And the Pats? Please make a Video :) I have replace the BCM for my Ford Fiesta 02/2013, keyless entry BCM programming is okay, the Pats programming 🧐🧐🧐
Is windows 10 and 11 capable with fjds.
Replaced a 2012 ford focus BCM that had corrosion on pins. Replaced it with another 2012 ford focus BCM. What needs to be changed on the new BCM? No key is detected now. Any help be appreciated. Also will forscan reprogram this? Thanks in advance.
@huyug1
2 жыл бұрын
You will need to perform PMI(Programable Module Installation) using FJDS/IDS which usually does online programming as well as As Built data. Than minimum 2 keys needs to be programmed to new BCM. After, perform Parameter reset. At that point car should be able to start. All TPMS sensors also might have to relearned.
@brettdore2635
2 жыл бұрын
@@huyug1 Thank you for information. I looked up the as built data. Both BCM are the same data entered in the fields. So how does the BCM and PATS system work together? If for some reason the new BCM don't work once PATS is programed with the old BCM reinstalled work with no further programing? The old one is currently working just having issues with horn going off and key fob not working correctly from the corrosion on some of the pins on the BCM.
Are you in California, if you are in ca I need your help with a 2015 ford
Why did you finish with Autel IM608? You couldn't do the parameter reset with FJDS?
@TradeDiagnostics
Жыл бұрын
He did say in the video that he used the IM608 because he didn’t have access to the Ford security codes. The IM608 just by passes the need for a code.
Thanks for the great content very helpful, but the back ground music was very distracting almost drowning out your dialogue. thx again
Boss can we Program all the module with j2534 like specially when I have to change the transmission can we put solenoid data with this or need vcm2
@huyug1
2 жыл бұрын
kzread.info/dash/bejne/i4WdwZetZJvcZdY.html
@viridian6903
2 жыл бұрын
Does the fllow data are inportant to write when we make upgrade firmware of tcm
Hi. Can you do parameter reset o 2018+ Ford 150 with im608 pro? Regards.
@rickymesa
Жыл бұрын
I don't think so because it asks for codes..
@tomdenson8366
Жыл бұрын
Tfain
I respect your repair video thank you but you really confuse me with that what you work on when you say Waco what the hell man just say car 🚗